Paper Search Console

Home Search Page About Contact

Journal Title

Title of Journal: J Solid State Electrochem

Search In Journal Title:

Abbravation: Journal of Solid State Electrochemistry

Search In Journal Abbravation:

Publisher

Springer-Verlag

Search In Publisher:

DOI

10.1016/0024-3205(90)90364-w

Search In DOI:

ISSN

1433-0768

Search In ISSN:
Search In Title Of Papers:

Kinetic analysis of the hydrogen oxidation reactio

Authors: RenBin Lin ShinMin Shih
Publish Date: 2005/12/13
Volume: 10, Issue: 4, Pages: 243-249
PDF Link

Abstract

The hydrogen oxidation reaction on Ptblack/Nafion electrode was investigated using a rotating disk electrode and cyclic voltammetry technique The voltammetric results demonstrated that the electrode can be prepared with good reproducibility and that Ptblack particles without direct contact with Nafion were still electrochemically active in taking part in the Hadsorption/desorption process For hydrogen oxidation the limiting current density was reduced by the presence of Nafion coating The H2 diffusion resistance in Nafion film was avoided when the film thickness was less than 02 μm for a Ptblack loading of 20 μg Moreover the uncertainties in the kinetic results were discussed

Keywords:

References

.
Search In Abstract Of Papers:
Other Papers In This Journal:
  1. Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors
  2. Electrochemical behavior of passive films on Al–17Si–14Mg (wt.%) alloy in near-neutral solutions
  3. A modified hierarchical porous carbon for lithium/sulfur batteries with improved capacity and cycling stability
  4. Electrocatalytic properties of platinum nanocenters electrogenerated at ultra-trace levels within zeolitic phosphododecatungstate cesium salt matrices
  5. Effect of oxidative stabilization on the electrochemical performance of carbon mesophases as electrode materials for lithium batteries
  6. Use of screen-printed electrodes for quantification of cocaine and Δ​ 9 -THC: adaptions to portable systems for forensic purposes
  7. In situ optical spectroelectrochemistry of single-walled carbon nanotube thin films
  8. The processes involved in the Se electrodeposition and dissolution on Au electrode: the H 2 Se formation
  9. Sulfonated poly(ether ether ketone)/poly(vinylidene fluoride)/graphene composite membrane for a vanadium redox flow battery
  10. Effect of surfactant on the morphology and capacitive performance of porous NiCo 2 O 4
  11. Selenium electrochemistry in choline chloride–urea deep eutectic electrolyte
  12. Enhanced lithium-ion intercalation and conduction of transparent tantalum oxide films by lithium addition with an atmospheric pressure plasma jet
  13. Electrophoretic deposition of nickel, iron and aluminum nanoparticles on carbon fibers
  14. Nucleation and growth of Cu onto polycrystalline Pt electrode from acidic CuSO 4 solution in the presence of H 2 SeO 3
  15. Development of nano IrO 2 composite-reinforced nickel–phosphorous electrodes for hydrogen evolution reaction
  16. Lithium ion penetration depth profiles and reversibility of electrochromic reaction for TiO 2 thin films
  17. Surface modification of LiNi 0.8 Co 0.1 Mn 0.1 O 2 with conducting polypyrrole
  18. Corrosion and corrosion inhibition characteristics of bulk nanocrystalline ingot iron in sulphuric acid
  19. Overlap of the oxide and hydrogen regions of platinum electrodes in aqueous acid solution
  20. Dealloying technique in the synthesis of lithium-ion battery anode materials
  21. Direct electrochemical analysis of glucose oxidase on a graphene aerogel/gold nanoparticle hybrid for glucose biosensing
  22. Influence of cationic gemini surfactants on the electrochemical behavior of 2-thiouracil at silver electrodes
  23. Size-controlled synthesis of Cu 2 O nanoparticles on reduced graphene oxide sheets and their application as non-enzymatic glucose sensor materials
  24. Simultaneous voltammetric detection of dopamine and uric acid in the presence of high concentration of ascorbic acid using multi-walled carbon nanotubes with methylene blue composite film-modified electrode
  25. Indicator-free impedimetric detection of BCR/ABL fusion gene based on ordered FePt nanoparticle-decorated electrochemically reduced graphene oxide
  26. Thermal expansion, gas permeability, and conductivity of Ni-YSZ anodes produced by different techniques
  27. Electrodeposition of nanocrystalline zinc from acidic sulfate solutions containing thiourea and benzalacetone as additives
  28. Magnetic properties of electrochemically prepared crystalline films of Prussian blue-based molecular magnets K j Cr II k [Cr III (CN) 6 ] l ·  m H 2 O
  29. Comment on “Factorizing of a concentration function for the mean activity coefficients of aqueous strong electrolytes into individual functions for the ionic species” by A. Ferse and H.O. Müller
  30. Modeling of surface exchange reactions and diffusion in composites including transport processes at grain and interphase boundaries
  31. The electrooxidation of small organic molecules on platinum nanoparticles supported on gold: influence of platinum deposition procedure
  32. Lignite-derived mesoporous N- and O-enriched carbon sheet: a low-cost promising electrode for high-performance electrochemical capacitors
  33. Phase composition of electrodeposited silver-indium alloys
  34. Structural and optical properties of tripod-like ZnO thin film and its application in dye-sensitized solar cell
  35. Facile preparation of hierarchical porous carbons for supercapacitors by direct carbonization of potassium humate
  36. A new method for electrocrystallization of AgTCNQF 4 and Ag 2 TCNQF 4 (TCNQF 4 = 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) in acetonitrile
  37. Electrochemical characterization of carbon paste electrodes modified with MgZnGa and ZnGaAl hydrotalcite-like compounds
  38. On the open-circuit interaction between methanol and oxidized platinum electrodes
  39. Experimental and theoretical studies on the corrosion properties of some conducting polymer coatings
  40. Changing face of electrochemistry
  41. Effect of sonochemistry: Li- and Mn-rich layered high specific capacity cathode materials for Li-ion batteries
  42. Electrocatalytic oxidation of methanol on Ni modified polyaniline electrode in alkaline medium
  43. Surface treatment of LiFePO 4 cathode material with PPy/PEG conductive layer
  44. Application of 7 Li NMR to characterize the evolution of intercalated and non-intercalated lithium in LiFePO 4 -based materials for Li-ion batteries
  45. A facile method to prepare bi-phase lithium vanadate as cathode materials for Li-ion batteries
  46. Colloidal particle size of fumed silica dispersed in solution and the particle size effect on silica gelation and some electrochemical behaviour in gelled electrolyte
  47. Investigation of the electrocatalytic oxidation of formate and ethanol at platinum black under microbial fuel cell conditions
  48. An amperometric sensor for hydrazine based on nano-copper oxide modified electrode
  49. Underpotential shift in electrodeposition of metal adlayer on tellurium and the free energy of metal telluride formation
  50. Capacitive characteristics of nanocomposites of conducting polypyrrole and functionalized carbon nanotubes: pulse current synthesis and tailoring
  51. Synthesis of Mo-cluster compound, LiHoMo 3 O 8 by carbothermal reduction and its reactivity towards Li
  52. Hierarchical nanocomposites of polyaniline scales coated on graphene oxide sheets for enhanced supercapacitors
  53. Estimation of oxygen ionic conductivity in nickel-zirconia composite by oxygen permeation method
  54. Fitting of the voltage–Li + insertion curve of LiFePO 4
  55. Influence of surface preparation and microstructure on the passivity and corrosion behaviour of duplex stainless steels
  56. Nanocomposite of polymerized ionic liquid and graphene used as modifier for direct electrochemistry of cytochrome c and nitric oxide biosensing
  57. Transport processes in mixed conducting oxides: combining time domain experiments and frequency domain analysis
  58. An efficient electrochemical disinfection of E . coli and S . aureus in drinking water using ferrocene–PAMAM–multiwalled carbon nanotubes–chitosan nanocomposite modified pyrolytic graphite electrode
  59. A sensitive and reliable rutin electrochemical sensor based on palladium phthalocyanine-MWCNTs-Nafion nanocomposite
  60. Electrochemical nucleation of lead and copper on indium-tin oxide electrodes
  61. p -Type behaviour of electrodeposited ZnO:Cu films
  62. Simultaneous determination of levodopa, NADH, and tryptophan using carbon paste electrode modified with carbon nanotubes and ferrocenedicarboxylic acid
  63. Influence of the electropolymerisation mode on PEDOTh films morphology and redox behaviour—an AFM investigation
  64. Electrodeposition of CuGaSe 2 and CuGaS 2 thin films for photovoltaic applications
  65. Cyclic voltammetry and electrochemical quartz crystal microbalance studies of a rhodized platinum electrode in sulfuric acid solution
  66. Insight into the electrochemical reduction of CO 2 on gold via surface-enhanced Raman spectroscopy and N-containing additives
  67. Simplest Prussian-blue deposition from ferric ferricyanide solution by a reducing Ag spot put onto an ITO substrate
  68. The electrochemical properties of Ni 3 C carbide
  69. The surface characterization and corrosion resistance of 11 % Cr ferritic/martensitic and 9–15 % Cr ODS steels for nuclear fuel reprocessing application
  70. Voltammetry at spatially heterogeneous electrodes
  71. Theoretical analysis of the performance of a model supercapacitor consisting of metal oxide nano-particles
  72. Recovery of nanomolar detection limit of solid-contact lead (II)-selective electrodes by electrode conditioning
  73. Photocatalytic degradation on Disperse Blue with modified nano-TiO 2 film electrode
  74. Electrodeposition of three-dimensional Ni(OH) 2 nanoflakes on partially crystallized activated carbon for high-performance supercapacitors
  75. Investigation of the gas evolution in lithium ion batteries: effect of free lithium compounds in cathode materials
  76. Synthesis and electrochemical properties of carbon nanotubes obtained by pyrolysis of acetylene using AB 5 alloy
  77. Electrodeposition of Ni-Mg alloys from 1-butyl-3-methylimidazolium chloride/glycerin eutectic-based ionic liquid
  78. CdSe electrodeposition on anodic, barrier or porous Ti oxides. A sensitization effect
  79. High-voltage aqueous symmetric electrochemical capacitor based on Ru 0.7 Sn 0.3 O 2 ·nH 2 O electrodes in 1 M KOH
  80. High-voltage accumulation of metals as a tool to decrease the detection limit of anodic stripping voltammetry
  81. Electropolymerization of polypyrrole, modified with germanium, on a passivated titanium electrode in aqueous nitrate solution: new results on catalytic reduction of protons and dissolved oxygen
  82. Inclusion of surface heterogeneity in bridging PEM fuel cell electrode contamination kinetics and transport via a competitive Langmuir-Freundlich isotherm
  83. Mesoporous carbon nitride loaded with Pt nanoparticles as a bifunctional air electrode for rechargeable lithium-air battery
  84. Mesoporous amorphous MnO 2 as electrode material for supercapacitor
  85. Cobalt oxide nanostructure-modified glassy carbon electrode as a highly sensitive flow injection amperometric sensor for the picomolar detection of insulin
  86. Effect of TiO 2 /reduced graphene oxide composite thin film as a blocking layer on the efficiency of dye-sensitized solar cells
  87. Sonochemical synthesis of graphene oxide supported Pt–Pd alloy nanocrystals as efficient electrocatalysts for methanol oxidation
  88. Sonochemical and soft-chemical intercalation of lithium ions into MnO 2 polymorphs
  89. Comparison between different ways to determine diffusion coefficient and by solving Fick’s equation for spherical coordinates
  90. Synthesis and modification of activated carbon originated from Indonesian local Orange peel for lithium ion Capacitor’s cathode
  91. Synthesis and charge-discharge performance of Li 5 SiN 3 as a cathode material of lithium secondary batteries
  92. Supercapacitors based on carbide-derived carbons synthesised using HCl and Cl 2 as reactants
  93. Electrochemical behavior of aluminum alloy AA2024 in aqueous solutions in the presence of caffeine
  94. Copolymers and two-layered composites of poly( o -aminophenol) and polyaniline
  95. Oxidation of phenol on RuO 2 –TiO 2 /Ti anodes
  96. Theoretical scenarios for the electrochemistry of porous silicate-based materials: an overview
  97. Deposition of amorphous chromium layers
  98. Renewable silver amalgam film electrodes in electrochemical stripping analysis—a review
  99. Two-component polymer films of palladium and fullerene with covalently linked crown ether voids: effect of cation binding on the redox behavior
  100. Activated carbon aerogels with high bimodal porosity for lithium/sulfur batteries
  101. Supercapacitor carbon electrodes with high capacitance
  102. Porous nitrogen-doped graphene for high energy density supercapacitors in an ionic liquid electrolyte
  103. Supercapacitor carbon electrodes with high capacitance
  104. James A. Wingrave (ed.), Oxide surfaces (Surfactant sciences series, vol. 103).
  105. Electrochemical synthesis of nano-cobalt hexacyanoferrate at a sol–gel-coated electrode templated with β-cyclodextrin
  106. The non-integer cyclovoltammetric electron-exchange numbers of reversible redox reactions of adsorbates
Search Result: