Paper Search Console

Home Search Page About Contact

Journal Title

Title of Journal: JOM

Search In Journal Title:

Abbravation: JOM

Search In Journal Abbravation:

Publisher

Springer-Verlag

Search In Publisher:

DOI

10.1007/s11270-015-2487-2

Search In DOI:

ISSN

1543-1851

Search In ISSN:
Search In Title Of Papers:

Development Trends in EAF Steelmaking

Authors: Jai Pearce
Publish Date: 2012/10/26
Volume: 38, Issue: 3, Pages: 38-45
PDF Link

Abstract

Since 1960 construction and technological improvements have enabled shorter taptotap times in electric arc furnace operation The conversion cost in arc furnace melting is primarily influenced by power consumption electrodes and refractories Increases in installed power capacity accelerate the melt down stage Watercooled sidewall and roof elements auxiliary burners and metallurgical modifications ensure higher power concentration throughout melting Design modifications that permit slag free tapping and precise temperature control in furnace ladle and caster facilitate the use of ladle metallurgy The shorter taptotap times with a ladle station serving as a process buffer permit a single electric arc furnace installation to reliably supply a modern continuous caster operation The single furnace concept is a proven means of steel mill retrofit and capacity rationalization for more efficient operation with decreased operating cost

Keywords:

References

.
Search In Abstract Of Papers:
Other Papers In This Journal:
  1. Developments in Plasma Processes for Extractive Metallurgy
  2. Structural materials issues for the next generation fission reactors
  3. Defects in Strained Layer Semiconductors
  4. Engineering Education Answers the Challenge of the Future
  5. Titanium bearing ore and blast furnace slag viscosity
  6. Graphite to Graphene via Graphene Oxide: An Overview on Synthesis, Properties, and Applications
  7. Microalloying TiAl with Nitrogen and Tungsten
  8. Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys
  9. Fe-30Ni-5NiO alloy as inert anode for low-temperature aluminum electrolysis
  10. Strain-Induced Surface Dynamics of Aluminum Studied by In Situ Photoelectron Emission
  11. Titanium composite materials for transportation applications
  12. Microstructure of ASTM A-36 Steel Laser Beam Weldments
  13. Understanding Slag Freeze Linings
  14. The positive strain-rate dependence of ductility in a 50Mo-50Re alloy
  15. The mineral base and productive capacities of metals and non-metals of Kosovo
  16. Heat transfer and skin formation in a continuous-casting mold as a function of steel carbon content
  17. Metal Production: A Time to Reflect
  18. The Development of the Channel Injection Furnace for Demagging in the Secondary Aluminum Industry
  19. The cutting edge: Sharp biological materials
  20. A Model of Vanadium Carbide Growth on Steel Surfaces Obtained by Thermo Reactive Deposition
  21. The Emergence of Quantitative Sintering Theory from 1945 to 1955
  22. Electric furnace steelmaking in the next decade
  23. Single- and Two-Layer Coatings of Metal Blends onto Carbon Steel: Mechanical, Wear, and Friction Characterizations
  24. Effects of Vanadium (V and IV), Molybdenum (VI) and Lead (II) on the Oxidation Kinetics of Steel Scrap
  25. Soft Magnetic Materials in High-Frequency, High-Power Conversion Applications
  26. Shaping, Forming and Modeling of Advanced High Strength Steel
  27. Ultrananocrystalline Diamond-Coated Microporous Silicon Nitride Membranes for Medical Implant Applications
  28. The multiscale modeling of plastic deformation in metallic nanolayered composites
  29. Experiment on the Reliability of Aluminum-Stainless Steel Joints by Cold-Pressing Joining
  30. Cobalt Ferrite in YSZ for Use as Reactive Material in Solar Thermochemical Water and Carbon Dioxide Splitting, Part I: Material Characterization
  31. Automated X-Ray Spectrometric Analysis of Stainless Steel
  32. Large dataset generation, integration and simulation in materials science, part II
  33. Recent Progress in Developing and Qualifying Nanostructured Ferritic Alloys for Advanced Fission and Fusion Applications
  34. Development of a High-Temperature Tensile Tester for Micromechanical Characterization of Materials Supporting Meso-Scale ICME Models
  35. Enabling renewable energy—and the future grid—with advanced electricity storage
  36. Tellurium, its resourcefulness and recovery
  37. Effect of current density on the pulsed co-electrodeposition of nanocrystalline nickel-copper alloys
  38. Determining the stress required for deformation twinning in nanocrystalline and ultrafine-grained copper
  39. Influence of High-Sulfur Cokes on Anode Performance in Alumina Reduction
  40. Review of Structure Representation and Reconstruction on Mesoscale and Microscale
  41. Feasibility Study of Regenerative Burners in Aluminum Holding Furnaces
  42. Development of Melting and Thermomechanical-Processing Parameters for a High-Nitrogen Stainless Steel Prepared by Plasma-Arc Remelting
  43. Optimizing the seamless tube extrusion process using the finite element method
  44. Examination of Solid-Solution Phase Formation Rules for High Entropy Alloys from Atomistic Monte Carlo Simulations
  45. The finite element simulation of high-temperature magnesium AZ31 sheet forming
  46. Deformation mechanisms in Mg alloys and the challenge of extending room-temperature plasticity
  47. Low-Density Steels
  48. Integrated Computational Modeling of Water Side Corrosion in Zirconium Metal Clad Under Nominal LWR Operating Conditions
  49. A contemporary view of nickel-base superalloys
  50. Environmental Compliance at Hoboken in 1983
  51. An Efficient Reactor for High-Lead Slag Reduction Process: Oxygen-Rich Side Blow Furnace
  52. Metal Separations and Recovery in the Mining Industry
  53. Zinc Recovery via the Flame Reactor Process
  54. Thermoplastic Micro-Forming of Bulk Metallic Glasses: A Review
  55. Microstructural Changes in Inconel ® 740 After Long-Term Aging in the Presence and Absence of Stress
  56. Sol–Gel Derived Hydroxyapatite Coating on Mg-3Zn Alloy for Orthopedic Application
  57. A Study of Chromo-Boronizing on DIN 1.2714 Steel by Duplex Surface Treatment
  58. Application Prospects and Microstructural Features in Laser-Induced Rapidly Solidified High-Entropy Alloys
Search Result: