Paper Search Console

Home Search Page About Contact

Journal Title

Title of Journal: JOM

Search In Journal Title:

Abbravation: JOM

Search In Journal Abbravation:

Publisher

Springer US

Search In Publisher:

DOI

10.1007/s100060050151

Search In DOI:

ISSN

1543-1851

Search In ISSN:
Search In Title Of Papers:

An Efficient Reactor for HighLead Slag Reduction

Authors: Lin Chen Tianzu Yang Shu Bin Weifeng Liu Duchao Zhang Wanda Bin Li Zhang
Publish Date: 2014/07/22
Volume: 66, Issue: 9, Pages: 1664-1669
PDF Link

Abstract

This work reports an efficient reactor ie oxygenrich side blow furnace OSBF for highlead slag reduction An OSBF with a crosssectional area of 84 m2 was applied in an industrialscale test and the results were compared with those from a traditional highlead slag reduction reactor ie blast furnace BF with which an additional electric heating fore well EHFW was connected for slag cleaning By using the OSBF Pb and Cu recoveries were raised by 107 and 799 compared with those from the traditional BF+EHFW respectively The optimal slag type for recovering metal values in the OSBF was also analyzed Within the range of Fe/SiO2 = 156–187 and CaO/SiO2 = 08–105 lower Pb and Cu contents of the slag can be achieved with Fe/SiO2 = 165–175 and CaO/SiO2 = 10

Keywords:

References

.
Search In Abstract Of Papers:
Other Papers In This Journal:
  1. Developments in Plasma Processes for Extractive Metallurgy
  2. Structural materials issues for the next generation fission reactors
  3. Defects in Strained Layer Semiconductors
  4. Engineering Education Answers the Challenge of the Future
  5. Titanium bearing ore and blast furnace slag viscosity
  6. Graphite to Graphene via Graphene Oxide: An Overview on Synthesis, Properties, and Applications
  7. Microalloying TiAl with Nitrogen and Tungsten
  8. Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys
  9. Fe-30Ni-5NiO alloy as inert anode for low-temperature aluminum electrolysis
  10. Strain-Induced Surface Dynamics of Aluminum Studied by In Situ Photoelectron Emission
  11. Titanium composite materials for transportation applications
  12. Microstructure of ASTM A-36 Steel Laser Beam Weldments
  13. Understanding Slag Freeze Linings
  14. Development Trends in EAF Steelmaking
  15. The positive strain-rate dependence of ductility in a 50Mo-50Re alloy
  16. The mineral base and productive capacities of metals and non-metals of Kosovo
  17. Heat transfer and skin formation in a continuous-casting mold as a function of steel carbon content
  18. Metal Production: A Time to Reflect
  19. The Development of the Channel Injection Furnace for Demagging in the Secondary Aluminum Industry
  20. The cutting edge: Sharp biological materials
  21. A Model of Vanadium Carbide Growth on Steel Surfaces Obtained by Thermo Reactive Deposition
  22. The Emergence of Quantitative Sintering Theory from 1945 to 1955
  23. Electric furnace steelmaking in the next decade
  24. Single- and Two-Layer Coatings of Metal Blends onto Carbon Steel: Mechanical, Wear, and Friction Characterizations
  25. Effects of Vanadium (V and IV), Molybdenum (VI) and Lead (II) on the Oxidation Kinetics of Steel Scrap
  26. Soft Magnetic Materials in High-Frequency, High-Power Conversion Applications
  27. Shaping, Forming and Modeling of Advanced High Strength Steel
  28. Ultrananocrystalline Diamond-Coated Microporous Silicon Nitride Membranes for Medical Implant Applications
  29. The multiscale modeling of plastic deformation in metallic nanolayered composites
  30. Experiment on the Reliability of Aluminum-Stainless Steel Joints by Cold-Pressing Joining
  31. Cobalt Ferrite in YSZ for Use as Reactive Material in Solar Thermochemical Water and Carbon Dioxide Splitting, Part I: Material Characterization
  32. Automated X-Ray Spectrometric Analysis of Stainless Steel
  33. Large dataset generation, integration and simulation in materials science, part II
  34. Recent Progress in Developing and Qualifying Nanostructured Ferritic Alloys for Advanced Fission and Fusion Applications
  35. Development of a High-Temperature Tensile Tester for Micromechanical Characterization of Materials Supporting Meso-Scale ICME Models
  36. Enabling renewable energy—and the future grid—with advanced electricity storage
  37. Tellurium, its resourcefulness and recovery
  38. Effect of current density on the pulsed co-electrodeposition of nanocrystalline nickel-copper alloys
  39. Determining the stress required for deformation twinning in nanocrystalline and ultrafine-grained copper
  40. Influence of High-Sulfur Cokes on Anode Performance in Alumina Reduction
  41. Review of Structure Representation and Reconstruction on Mesoscale and Microscale
  42. Feasibility Study of Regenerative Burners in Aluminum Holding Furnaces
  43. Development of Melting and Thermomechanical-Processing Parameters for a High-Nitrogen Stainless Steel Prepared by Plasma-Arc Remelting
  44. Optimizing the seamless tube extrusion process using the finite element method
  45. Examination of Solid-Solution Phase Formation Rules for High Entropy Alloys from Atomistic Monte Carlo Simulations
  46. The finite element simulation of high-temperature magnesium AZ31 sheet forming
  47. Deformation mechanisms in Mg alloys and the challenge of extending room-temperature plasticity
  48. Low-Density Steels
  49. Integrated Computational Modeling of Water Side Corrosion in Zirconium Metal Clad Under Nominal LWR Operating Conditions
  50. A contemporary view of nickel-base superalloys
  51. Environmental Compliance at Hoboken in 1983
  52. Metal Separations and Recovery in the Mining Industry
  53. Zinc Recovery via the Flame Reactor Process
  54. Thermoplastic Micro-Forming of Bulk Metallic Glasses: A Review
  55. Microstructural Changes in Inconel ® 740 After Long-Term Aging in the Presence and Absence of Stress
  56. Sol–Gel Derived Hydroxyapatite Coating on Mg-3Zn Alloy for Orthopedic Application
  57. A Study of Chromo-Boronizing on DIN 1.2714 Steel by Duplex Surface Treatment
  58. Application Prospects and Microstructural Features in Laser-Induced Rapidly Solidified High-Entropy Alloys
Search Result: