Paper Search Console

Home Search Page About Contact

Journal Title

Title of Journal: J Mater Sci Mater Electron

Search In Journal Title:

Abbravation: Journal of Materials Science: Materials in Electronics

Search In Journal Abbravation:

Publisher

Springer US

Search In Publisher:

DOI

10.1006/anbe.1994.1192

Search In DOI:

ISSN

1573-482X

Search In ISSN:
Search In Title Of Papers:

Low temperature sintering and properties of leadf

Authors: Wenhua Li Xinyu Liu Jiafeng Ma Yi Wu Yerang Cui
Publish Date: 2012/11/05
Volume: 24, Issue: 5, Pages: 1551-1555
PDF Link

Abstract

The lowtemperature sintering behavior of Ba085Ca015Zr010Ti090O3 BCZT piezoelectric ceramics with BaCu05W05O3 BCW addition has been investigated The addition of 01 wt BCW promotes the sinterability of BCZT ceramics owing to the generation of a liquid phase resulting in a reduction of sintering temperature from 1540 to 1350 °C The piezoelectric coefficient d 33 and the electromechanical coupling factor kp of the BCZT − 01 wtBCW specimen sintered at 1350 °C were 555 pC/N and 55  respectively while Curie temperature Tc increases from 85 to 95 °CThis work was supported by the programs from the National Nature Science Foundation of China No 51102056 and Guangxi Nature Science Foundations of China No 2010GXNSFD013007 2011GXNSFB018008 and Program for Excellent Talents in Guangxi Higher Education Institutions and Research Program of Guangxi Education Department 201012MS085

Keywords:

References

.
Search In Abstract Of Papers:
Other Papers In This Journal:
  1. Investigation of nanostructured silicon as a candidate for heat sensitive material
  2. Synthesis, microstructure, and luminescence properties of 3C-SiC powders
  3. Investigation of luminescent properties of red-emitting Ba(Gd,Eu)B 9 O 16 phosphors and the effect of Ca and Sr on its luminescent properties
  4. Sizes effect of CeSn 3 on the whiskers growth of SnAgCuCe solder joints in electronic packaging
  5. Crystal structure and optimized microwave dielectric properties of (1 −  x ) LiZn 0.5 Ti 1.5 O 4 – x TiO 2 ceramics for application in dielectric resonator
  6. Studies of structural and magnetic properties of sol–gel synthesized cobalt substituted Zn–Mn chromites
  7. Influences of Ca nonstoichiometry on the superconducting properties of Bi-2212 superconducting bulks
  8. Enhanced frequency upconversion and non-colour tunability in Er 3+ –Yb 3+ codoped TeO 2 –WO 3 –Pb 3 O 4 glasses
  9. Sensitization and radiation hardening of the photostimulable X-ray storage phosphor CsBr:Eu 2+
  10. Synthesis of ZnSnO 3 nanocubes and thin film fabrication of (ZnSnO 3 /PMMA) composite through electrospray deposition
  11. Synthesis of ZnSnO 3 nanocubes and thin film fabrication of (ZnSnO 3 /PMMA) composite through electrospray deposition
  12. (111)-Oriented Pb(Zr 0.52 Ti 0.48 )O 3 thin film on Pt(111)/Si substrate using CoFe 2 O 4 nano-seed layer by pulsed laser deposition
  13. Catalyst Ni-assisted synthesis of interweaved SiO/G/CNTs&CNFs composite as anode material for lithium-ion batteries
  14. Synthesis and systematic investigations of Al and Cu-doped ZnO nanoparticles and its structural, optical and photo-catalytic properties
  15. Sol-gel nanocomposites as metamaterials: preparation and optical measurements
  16. A simple wet chemical route to synthesize ferromagnetic nickel ferrite nanoparticles in the presence of oleic acid as a surfactant
  17. Magnetic studies of Mn 0.2 Cr 1.8− x Fe x O 3 nano oxides prepared via hydrothermal route
  18. Room temperature magneto-optics of nanostructured ZnO:Mn thin film grown by spray pyrolysis
  19. Temperature-dependent complex impedance, electrical conductivity and dielectric studies of M Fe 2 O 4 ( M = Mn, Ni, Zn) ferrites prepared by sintering of mechanochemical synthesized nanopowders
  20. Electronic structures of ZnO(0001)-Zn and (000−1)-O polar surfaces
  21. Fabrication and comparative study of top-gate and bottom-gate ZnO–TFTs with various insulator layers
  22. Fabrication and gas-sensing performance of nanorod-assembled SnO 2 nanostructures
  23. Influence of heat treatment process on photocatalytic activity of photocatalyst TiO 2 /TiC x O y coatings during heat treatment in carbon powder
  24. Silicon photonic waveguides for mid- and long-wave infrared region
  25. Micro void growth in NiSnP layer between (Cu,Ni) 6 Sn 5 intermetallic compound and Ni 3 P by higher reflow temperature and multiple reflow
  26. Synthesis and characterization of Ag/AgCl/Bi 2 Zr 2 O 7 photocatalyst with enhanced visible-light-driven photocatalytic performance
  27. Effects of ZnO nanoneedles addition on the mechanical and piezoelectric properties of hard PZT-based composites
  28. The oxidation process of NiSi x film at high temperature in air and the antioxidant effect of SiO x N y /NiSi x film
  29. Structural, optical and microscopic properties of chemically deposited Mo 0.5 W 0.5 Se 2 thin films
  30. Synthesis of water soluble chromophore with A–π–D–π–A structures
  31. Effect of Co doping on the structural and optical properties of ZnO nanospindles synthesized by co-precipitation method
  32. Nitrogen doping of SiC thin films deposited by RF magnetron sputtering
  33. Influence of electrode position in the electrolytic cell configuration for the electrodeposition of Cu(In,Ga)Se 2 thin films
  34. Novel composites of Zn 1−x Cd x O (x = 0, 0.05, 0.1) thick films for optoelectronic device application
  35. Synthesis and enhanced photocatalytic activity of Zr-doped N-TiO 2 nanostructures
  36. Preparation and characterization of CeO 2 decorated TiO 2 nanotube arrays photoelectrode and its enhanced photoelectrocatalytic efficiency for degradation of methyl orange
  37. Adhesion characteristics of Cu/Ni–Cr/polyimide flexible copper clad laminates according to Ni:Cr ratio and Cu electroplating layer thickness
  38. Synthesis of PbSe nanostructures with different size and morphology and their electrochemical properties
  39. Microstructures and properties of Sn58Bi, Sn35Bi0.3Ag, Sn35Bi1.0Ag solder and solder joints
  40. Influence of Ti doping on the superconducting properties of YBa 2 (Cu 3−x Ti x )O 7−δ materials
  41. Structure and charge density of Ce doped gadolinium gallium garnet (GGG)
  42. A novel poling technique to obtain excellent piezoelectric properties of Pb(Mg 1/3 Nb 2/3 )O 3 –0.32PbTiO 3 single crystals
  43. Properties of pulse electrodeposited copper gallium sulphide films
  44. PEG-assisted hydrothermal synthesis and luminescent properties of ZnWO 4 :Sm 3+ white light-emitting phosphors
  45. Cobalt substituted ZnO thin films: a potential candidate for spintronics
  46. Indium rich InGaN solar cells grown by MOCVD
  47. Raman scattering characterization of Ge-composition in bulk Si 1− x Ge x with compositional variation
  48. Surface and bulk exciton recombination dynamics in GaN freestanding films via one- and two-photon excitations
  49. Single source precursor for vacuum evaporation of MoBi 2 Se 5 photoactive thin films
  50. Dielectric and thermal properties of CCTO/epoxy composites for embedded capacitor applications: mixing and fabrication methods
  51. Influence of Tm 2 O 3 doping on structural and electrical properties of ZnO
  52. Highly efficient dye sensitized solar cells based on a novel ruthenium sensitizer
  53. Profile of the wafer level ECD gold bumps under variable parameters
  54. Role of annealing temperature on microstructural and electro-optical properties of ITO films produced by sputtering
  55. Electrical, electrochemical and photo-electrochemical studies on the electrodeposited n-type semiconductor hexagonal crystalline CdS thin film on nickel substrate
  56. Copper diffusion in germanium: connecting point defect parameters with bulk properties
  57. Preparation and properties of BaTiO 3 filled butyl rubber composites for flexible electronic circuit applications
  58. Ca 4 La 2 Ti 5 O 17 : a novel low loss dielectric ceramics in the CaO–La 2 O 3 –TiO 2 system
  59. Electrical properties of Y-modified Pb(SnTi)O 3 ferroelectric ceramics
  60. Synthesis and characterization of Ba 0.7 Sr 0.3 TiO 3 , BaZr 0.3 Ti 0.7 O 3 thin film heterostructures
  61. Solid-state method for incorporation of lead sulfide nanoplates in poly(3,4-ethylenedioxythiophene) matrix as NIR materials
  62. Solid-state method for incorporation of lead sulfide nanoplates in poly(3,4-ethylenedioxythiophene) matrix as NIR materials
  63. Emitter passivation of silicon solar cell via organic coating at room temperature
  64. Synthesis, characterization and growth mechanism of ZnO nanowires on NiCl 2 -coated Si substrates
  65. Annealing behavior of TiO 2 -sheathed Ga 2 O 3 nanowires
  66. Failure behaviors of BGA solder joints under various loading conditions of high-speed shear test
  67. Effects of glass additions on the dielectric properties and energy storage performance of Pb 0.97 La 0.02 (Zr 0.56 Sn 0.35 Ti 0.09 )O 3 antiferroelectric ceramics
  68. Structure and temperature-stability of piezoelectric properties of K 0.5 Na 0.5 NbO 3 –LiSbO 3 –Al(Fe 0.9 Mn 0.1 )O 3 lead-free ceramics
  69. High speed and low power consumption of superlattice-like Ge/Sb 70 Se 30 thin films for phase change memory application
  70. Giant dielectric and electrical properties of sodium yttrium copper titanate: Na 1/2 Y 1/2 Cu 3 Ti 4 O 12
  71. Microstructure, optical and photoelectron-chemical properties of TiO 2 microspheres prepared by hydrothermal method
  72. Optical and magnetic investigation of Co-doped-TiO 2 : various morphologies of titanium dioxide nanostructures
  73. Microstructure and thermal expansion behavior of spray-formed Al–27Si alloy used for electronic packaging
  74. The synthesis of large area graphene/carbon nanotubes as additive material and their enhanced specific capacitance
  75. Effect of deposition temperature on structural, microstructural and magnetic properties of CoFe 2 O 4 thin films deposited by pulsed laser deposition
  76. Effect of humidity treatment on the structure and photocatalytic properties of titania mesoporous powder
  77. Complete photocatalytic mineralization of Nile blue on hetero-structured CoTiO 3 nano-composite coated on glass in a sol–gel process using diethylene glycol as stabilizer: effect of charge separation and calcination temperature on activity
  78. Nanocrystalline copper selenide thin films by chemical spray pyrolysis
  79. Synthesis and characterization of NiMoO 4 via ultrasonic route by a novel precursor
  80. Effects of AlN buffer on the physical properties of GaN films grown on 6H-SiC substrates
  81. Glass structure of the CaO–B 2 O 3 –SiO 2 –Al 2 O 3 –ZnO glasses system with different Si content
  82. Effects of substrate temperatures on the thermal stability of Al-doped ZnO thin films grown by DC magnetron sputtering
  83. Synthesis, characterization, and microwave dielectric properties of monoclinal structure ZnZrNb 2 O 8 ceramics through the aqueous sol–gel process
  84. Preparation and properties of coke powder activated carbon/α-Co(OH) 2 composite electrode materials
  85. Structural, optical and magnetic properties of Cr doped In 2 O 3 powders and thin films
  86. Optical properties of nanocrystalline silicon deposited by PECVD
  87. Luminescent properties of sol–gel processed red-emitting phosphor Eu 3+ , Bi 3+ co-doped (Ca,Sr)(Mo,W)O 4
  88. Effects of B 2 O 3 additive on sintering behavior and microwave dielectric properties of LaAlO 3 -doped MgTiO 3 –CaTiO 3 ceramics
  89. Concentration-driven structural stability and dielectric dispersion in lead free (Ba 1−x Sc 2x/3 )Zr 0.3 Ti 0.7 O 3 ceramics
  90. Synthesis and characterization of sol–gel derived (Ba,Ca)(Ti,Zr)O 3 nanoparticles
  91. Investigations of doping induced structural, optical and magnetic properties of Ni doped ZnS diluted magnetic semiconductors
  92. Strain induced structural phase transition in NaNbO 3 doped BiFeO 3
  93. Strain induced structural phase transition in NaNbO 3 doped BiFeO 3
  94. Switching in structural, optical, and magnetic properties of self-assembled Co-doped ZnO: effect of Co-concentration
  95. Optical properties of Ag doped ZnO nanocrystals prepared by hydrothermal and photodeposition method
  96. Enhanced photocatalytic activity of BiFeO 3 particles by surface decoration with Ag nanoparticles
  97. Influence of filament-to-substrate distance on the spectroscopic, structural and optical properties of silicon carbide thin films deposited by HWCVD technique
  98. Structural, optical and ferroelectric behavior of pure BiFeO 3 thin films synthesized by the sol–gel method
  99. Influence of nitrogen gas flow rate on the structural, morphological and electrical properties of sputtered TiN films
  100. h -MoO 3 microrods grown on wood substrates through a low-temperature hydrothermal route and their optical properties
  101. Effect of Ho 3+ substitution on magnetic and microwave absorption properties of Sr(ZnZr) 0.5 Fe 12 O 19 hexagonal ferrite nanoparticles
  102. Enhanced energy storage density performance in (Pb 0.97 La 0.02 )(Zr 0.5 Sn 0.44 Ti 0.06 )–BiYO 3 anti-ferroelectric composite ceramics
  103. Preparation and conductive mechanism of copper nanoparticles ink
  104. Directional solidification and characterization of InBi 1−x Sb x crystals
  105. High-boiling-point solvent synthesis of mesoporous NiCo 2 S 4 with high specific surface area as supercapacitor electrode material
  106. Varistor and giant permittivity properties of SnO 2 –Zn 2 SnO 4 ceramic matrix composites
  107. Defect based violet–blue emission of Mg doped ZnO annealed at different temperatures
  108. Different electric-field dependences of geminate and nongeminate recombination in photoluminescence of a-Si:H
  109. Upconversion luminescent materials of Y–Gd oxysulfide binary system codoped with Yb and Er
  110. Microwave dielectric properties of low-fired CoNb 2 O 6 ceramics with B 2 O 3 addition
  111. Newly developed biodegradable polymer nanocomposites of cellulose acetate and Al 2 O 3 nanoparticles with enhanced dielectric performance for embedded passive applications
  112. Facile synthesis of high performance non-noble-metal electrocatalyst Fe–N–S/C for oxygen reduction reaction in acidic solutions
  113. Preparation and characterization of water soluble and conducting poly(sodium 4-styrenesulfonate) doped poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotubes core–shell nanocomposites by in situ polymerization
  114. Improved magnetism in Cr doped ZnS nanoparticles with nitrogen co-doping synthesized using chemical co-precipitation technique
  115. Influence of organic salt concentration on the performance of bulk heterojunction organic solar cell
  116. Synthesis of superparamagnetic cobalt nanoparticles through solvothermal process
  117. Formation mechanism of NaNbO 3 powders during hydrothermal synthesis
  118. Development of n-type microcrystalline SiO x :H films and its application by innovative way to improve the performance of single junction µc-Si:H solar cell
  119. Development of a Sn–Ag–Cu solder reinforced with Ni-coated carbon nanotubes
  120. Development of multiferroic polymer nanocomposite from PVDF and (Bi 0.5 Ba 0.25 Sr 0.25 )(Fe 0.5 Ti 0.5 )O 3
  121. Low-temperature thermoelectric characteristics of Ca 3−x Yb x Co 3.95 Ga 0.05 O 9+δ (0 ≤ x ≤ 0.10)
  122. Effect of the substrate temperature on the structural, optical and electrical properties of spray-deposited CdS:B films
  123. Micro-porous silicon structure with low optical reflection
  124. PEDOT:PSS/graphene/PEDOT ternary film for high performance electrochemical electrode
  125. Microstructure, electrical and magnetic properties of polycrystalline La 0.85 K 0.15 MnO 3 manganites prepared by different synthesis routes
  126. BiB 3 O 6 :Pr 3+ partially crystallized glasses for second harmonic generation
  127. High-frequency response in Sr 1−x Ca x TiO 3 powders studied by terahertz time-domain spectroscopy
  128. A new method of depositing high figure-of-merit porous PZT pyroelectric thick film using [001]-oriented PZT nanorod by electrophoresis deposition
  129. Electrical characteristics of Au/n-Si (MS) Schottky Diodes (SDs) with and without different rates (graphene + Ca 1.9 Pr 0.1 Co 4 O x -doped poly(vinyl alcohol)) interfacial layer
  130. Composition control of co-electroplating Au–Sn deposits using experimental strategies
  131. Influence of thermal treatment on the nonlinear current–voltage behavior and restoration hysteresis effect of CaCu 3 Ti 4 O 12 thin films
  132. Atomic layer deposition of hafnium oxide dielectrics on silicon and germanium substrates
  133. Preparation and performance of organic–inorganic halide perovskites
  134. Application of power loss calculation to estimate the specific contact resistance of the screen-printed silver ohmic contacts of the large area silicon solar cells
  135. Microstructural and electrical properties of PbTIO 3 screen-printed thick films
  136. Enhanced photocatalytic activity of Mg 0.05 Zn 0.95 O thin films prepared by sol–gel method through a cycle
  137. Effect of stacking type in precursors on composition, morphology and electrical properties of the CIGS films
  138. Effects of Cr 2 O 3 doping on the microstructural and electrical properties of ZnO–Bi 2 O 3 based varistor films
  139. Optical characterisation of silicon nitride thin films grown by novel remote plasma sputter deposition
  140. In situ synthesis of CuS nanoparticle with a distinguishable SPR peak in NIR region
  141. Preparation and characteristic of magnetic LDPE/Fe 3 O 4 nano-composite films
  142. On the use of non-MPB lead zirconium titanate (PZT) granules for piezoelectric ceramic–polymer sensorial composites
  143. Al x (Sn 2 Se 3 ) 1−x phase change films for high-temperature data retention and fast transition speed application
  144. Comparison of structural, optical, photocatalytic behavior and hydrophilic properties of pure and Sn/La co-doped TiO 2 thin films
  145. Synthesis and characterization of thin films of palladium (II) phthalocyanine and its derivatives using the thermal evaporation technique
  146. Growth and characterization of well-aligned rutile TiO 2 nanocrystals on sapphire substrates via metal organic vapour deposition
  147. Fabrication of Y 2 O 2 S:Eu 3+ hollow nanofibers by sulfurization of Y 2 O 3 :Eu 3+ hollow nanofibers
  148. Rietveld analysis, magnetic, vibrational and impedance properties of (Bi 1−x Pr x )(Fe 1−x Zr x )O 3 ceramics
  149. Microstructure and microwave dielectric properties of Ba 4.2 Nd 9.2 Ti 18−x Sn x O 54 (x = 0, 0.25, 0.5, 1, 1.5, 2) ceramics
  150. Effect of buffer thickness on the properties of Al-doped ZnO thin films prepared by DC magnetron sputtering
  151. Structural, optical and electrical properties of gamma-rays exposed selenium nanowires
  152. TiO 2 /porous silicon nanocomposite passivation coating for mc-Si wafers
  153. Interfacial microstructure and hardness of nickel (Ni) nanoparticle-doped tin–silver–copper (Sn–Ag–Cu) solders on immersion silver (Ag)-plated copper (Cu) substrates
  154. Fabrication and characterization of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF)-Ce 0.9 Gd 0.1 O 1.95 (GDC) composite thick film for anode supported solid oxide fuel cells
  155. Impedance spectroscopy study of TiO 2 addition on the ceramic matrix Na 2 Nb 4 O 11
Search Result: