Paper Search Console

Home Search Page About Contact

Journal Title

Title of Journal: J Mater Sci

Search In Journal Title:

Abbravation: Journal of Materials Science

Search In Journal Abbravation:

Publisher

Springer US

Search In Publisher:

DOI

10.1007/978-3-7091-8548-3_1

Search In DOI:

ISSN

1573-4803

Search In ISSN:
Search In Title Of Papers:

Effect of shot peening on surface mechanical prope

Authors: Weizhi Luan Chuanhai Jiang Vincent Ji Haowei Wang
Publish Date: 2009/05/01
Volume: 44, Issue: 10, Pages: 2454-2458
PDF Link

Abstract

The influence of shot peening on the surface mechanical properties of the TiB2/6351Al composite has been investigated The microstructures were determined by Xray diffraction line profile analysis The results showed that the increment of hardness was about 50 in the top surface layer The matrix proof stress σ02 of the shot peened surface had been increased by 27 and the whole strength increment was about 21 by considering the contribution of the reinforcements The domain size and the dislocation density in the strengthened surface were 55 nm and 367 × 1015 m−2 respectively The mechanical properties improvement of the modified surface was partially due to the reinforcements but mainly due to the fine domains high value of dislocation density induced by shot peening

Keywords:

References

.
Search In Abstract Of Papers:
Other Papers In This Journal:
  1. Effects of sintering aids on the densification of Mo–Si–B alloys
  2. Investigation of nanostructured silicon as a candidate for heat sensitive material
  3. Synthesis, microstructure, and luminescence properties of 3C-SiC powders
  4. Investigation of luminescent properties of red-emitting Ba(Gd,Eu)B 9 O 16 phosphors and the effect of Ca and Sr on its luminescent properties
  5. Effect of SiC particle dispersion on thermal properties of SiC particle-dispersed ZrB 2 matrix composites
  6. Infrared spectroscopic study of water in mesoporous silica under supercritical conditions
  7. Sizes effect of CeSn 3 on the whiskers growth of SnAgCuCe solder joints in electronic packaging
  8. Influence of coated SiC particulates on the mechanical and magnetic behaviour of Fe–Co alloy composites
  9. Crystal structure and optimized microwave dielectric properties of (1 −  x ) LiZn 0.5 Ti 1.5 O 4 – x TiO 2 ceramics for application in dielectric resonator
  10. Studies of structural and magnetic properties of sol–gel synthesized cobalt substituted Zn–Mn chromites
  11. Synthesis and characterization of niobium-doped potassium tetragonal tungsten bronzes, K x Nb y W 1− y O 3
  12. Influences of Ca nonstoichiometry on the superconducting properties of Bi-2212 superconducting bulks
  13. Effect of δ-ferrite co-existence on hot deformation and recrystallization of austenite
  14. A novel AgI/AgIO 3 heterojunction with enhanced photocatalytic activity for organic dye removal
  15. Surface energy controlled α–γ–α transformation texture and microstructure character study in ULC steels alloyed with Mn and Al
  16. Impurity effect of Mg on the generalized planar fault energy of Al
  17. Hemocompatibility of styrenic block copolymers for use in prosthetic heart valves
  18. Mechanical stability of retained austenite during plastic deformation of super high strength carbide free bainitic steels
  19. Sequential HAADF-STEM observation of structural changes in Au nanoparticles supported on CeO 2
  20. Sequential HAADF-STEM observation of structural changes in Au nanoparticles supported on CeO 2
  21. Enhanced frequency upconversion and non-colour tunability in Er 3+ –Yb 3+ codoped TeO 2 –WO 3 –Pb 3 O 4 glasses
  22. Geopolymerisation of low calcium ferronickel slags
  23. Sensitization and radiation hardening of the photostimulable X-ray storage phosphor CsBr:Eu 2+
  24. Synthesis of ZnSnO 3 nanocubes and thin film fabrication of (ZnSnO 3 /PMMA) composite through electrospray deposition
  25. Synthesis of ZnSnO 3 nanocubes and thin film fabrication of (ZnSnO 3 /PMMA) composite through electrospray deposition
  26. Electrochemical reactivity of polyimide and feasibility as a conductive binder for silicon negative electrodes
  27. (111)-Oriented Pb(Zr 0.52 Ti 0.48 )O 3 thin film on Pt(111)/Si substrate using CoFe 2 O 4 nano-seed layer by pulsed laser deposition
  28. Structures of a Σ = 9, [110]/{221} symmetrical tilt grain boundary in SrTiO 3
  29. Catalyst Ni-assisted synthesis of interweaved SiO/G/CNTs&CNFs composite as anode material for lithium-ion batteries
  30. Mechanical strength of ceramic scaffolds reinforced with biopolymers is comparable to that of human bone
  31. Synthesis and systematic investigations of Al and Cu-doped ZnO nanoparticles and its structural, optical and photo-catalytic properties
  32. The effects of substrate self-biasing on the growth of Sn-catalysed silicon nanowires grown at low pressure
  33. Sol-gel nanocomposites as metamaterials: preparation and optical measurements
  34. A simple wet chemical route to synthesize ferromagnetic nickel ferrite nanoparticles in the presence of oleic acid as a surfactant
  35. Mechanically alloyed magnesium–boron–iodine composite powders
  36. Magnetic studies of Mn 0.2 Cr 1.8− x Fe x O 3 nano oxides prepared via hydrothermal route
  37. Fifty years of Harper–Dorn creep: a viable creep mechanism or a Californian artifact?
  38. Effect of mixture ratios and nitrogen carrier gas flow rates on the morphology of carbon nanotube structures grown by CVD
  39. Injectability of brushite-forming Mg-substituted and Sr-substituted α-TCP bone cements
  40. Room temperature magneto-optics of nanostructured ZnO:Mn thin film grown by spray pyrolysis
  41. Freeze extrusion fabrication of 13–93 bioactive glass scaffolds for bone repair
  42. Temperature-dependent complex impedance, electrical conductivity and dielectric studies of M Fe 2 O 4 ( M = Mn, Ni, Zn) ferrites prepared by sintering of mechanochemical synthesized nanopowders
  43. Thermo-optic properties of hybrid sol–gel thin films doped with Rhodamine 6G at high vacuum conditions
  44. Electrical properties of NiFe 2 O 4 epitaxial ultra-thin films
  45. Indentation strength method to determine the fracture toughness of La 0.58 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ and Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ
  46. Spectroscopic properties of Nd 3+ , Yb 3+ -doped and Nd 3+ –Yb 3+ -codoped high silica glass
  47. Response to comments on “Enhancing the Photovoltaic Effect in the Infrared Region by Germanium Quantum Dots Inserted in the Intrinsic Region of a Silicon p-i-n Diode with Nanostructure”
  48. Electronic structures of ZnO(0001)-Zn and (000−1)-O polar surfaces
  49. Fabrication and comparative study of top-gate and bottom-gate ZnO–TFTs with various insulator layers
  50. Fabrication and gas-sensing performance of nanorod-assembled SnO 2 nanostructures
  51. Use of tissue transglutaminase and fibronectin to influence osteoblast responses to tricalcium phosphate scaffolds
  52. The effects of dopant impurities on Cu 2 ZnSnS 4 system Raman properties
  53. The impact of the RGD peptide on osteoblast adhesion and spreading on zinc-substituted hydroxyapatite surface
  54. Nano-hydroxyapatite/poly( l -lactic acid) composite synthesized by a modified in situ precipitation: preparation and properties
  55. Decoration of surface-carboxylated graphene oxide with luminescent Sm 3+ -complexes
  56. Effects of dispersants on dispersion of carbon nanotubes and properties of fluorocarbon resin nanocomposites
  57. A non-destructive method for thickness measurement of thin electrospun membranes using white light profilometry
  58. Interface science of thermal barrier coatings
  59. Study of hot deformation behaviour of 2205 duplex stainless steel through hot tension tests
  60. Influence of heat treatment process on photocatalytic activity of photocatalyst TiO 2 /TiC x O y coatings during heat treatment in carbon powder
  61. Silicon photonic waveguides for mid- and long-wave infrared region
  62. Incorporation of epoxy resin and carbon nanotube into silica/siloxane network for improving thermal properties
  63. Influence of carbon fibre treatment and filler addition on porosity and structure change of carbon fibres reinforced phenolic matrix composites during carbonization
  64. Electrochemical synthesis and characterization of zinc selenide thin films
  65. Vacuum arc deposition of Al 2 O 3 –ZrO 2 coatings: arc behavior and coating characteristics
  66. Characterization of superconducting Fe y (Se 1− x Te x ) thin films deposited on MgO substrates by sputtering
  67. Poly ( d , l -lactide)/nano-hydroxyapatite composite scaffolds for bone tissue engineering and biocompatibility evaluation
  68. Fabrication of silicon carbide composites with carbon nanofiber addition and their fracture toughness
  69. Micro void growth in NiSnP layer between (Cu,Ni) 6 Sn 5 intermetallic compound and Ni 3 P by higher reflow temperature and multiple reflow
  70. Synthesis and characterization of Ag/AgCl/Bi 2 Zr 2 O 7 photocatalyst with enhanced visible-light-driven photocatalytic performance
  71. Effects of ZnO nanoneedles addition on the mechanical and piezoelectric properties of hard PZT-based composites
  72. The effect of Si and microstructure evolution on the thermal expansion properties of Fe–42Ni–Si alloy strips
  73. The oxidation process of NiSi x film at high temperature in air and the antioxidant effect of SiO x N y /NiSi x film
  74. Stretch formability of Mn-free AZ31 Mg alloy rolled at high temperature (723 K)
  75. Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part I—Low Si/Al ratio systems
  76. Structural, optical and microscopic properties of chemically deposited Mo 0.5 W 0.5 Se 2 thin films
  77. Infrared and microwave shielding of transparent Al-doped ZnO superlattice grown via atomic layer deposition
  78. Bone-like apatite coating on Mg-PSZ/Al 2 O 3 composites using bioactive systems
  79. Ferroelectric transitions in valence compensated Ba 1− x La x Ti 1− x Cr x O 3 ceramics
  80. Characterization of clay composite ballistic witness materials
  81. Preparation and structural investigation of nanostructured oxide dispersed strengthened steels
  82. Synthesis of water soluble chromophore with A–π–D–π–A structures
  83. Effect of Co doping on the structural and optical properties of ZnO nanospindles synthesized by co-precipitation method
  84. Preparation of porous spherical ZrO 2 –SiO 2 composite particles using templating and its solid acidity by H 2 SO 4 treatment
  85. Thermoluminescence and induced absorption in X-ray-irradiated CdS-doped glasses
  86. Vapor–solid synthesis and enhanced thermoelectric properties of non-planar bismuth selenide nanoplates on graphene substrate
  87. Effect of sintering temperature on dielectric properties, vibrational modes and crystal structures of Ba[(Ni 0.7 Zn 0.3 ) 1/3 Nb 2/3 ]O 3 ceramics
  88. Mesostructure optimization in multi-material additive manufacturing: a theoretical perspective
  89. Hardness and density profile of surface densified and thermally modified Scots pine in relation to degree of densification
  90. Depth profile XPS analysis of polymeric materials by C 60 + ion sputtering
  91. Relaxor behavior of (1 − x )BaTiO 3 – x (Bi 3/4 Na 1/4 )(Mg 1/4 Ti 3/4 )O 3 (0.2 ≤ x ≤ 0.9) ferroelectric ceramic
  92. Thermal and structural study of nanocrystalline Fe(Co)NiZrB alloys prepared by mechanical alloying
  93. Using chondroitin sulfate to improve the viability and biosynthesis of chondrocytes encapsulated in interpenetrating network (IPN) hydrogels of agarose and poly(ethylene glycol) diacrylate
  94. Nitrogen doping of SiC thin films deposited by RF magnetron sputtering
  95. Effective manipulation of the microstructure of zeolite film by hydrothermal pretreatment
  96. Uniformity of filament strength within a flax fiber batch
  97. Influence of electrode position in the electrolytic cell configuration for the electrodeposition of Cu(In,Ga)Se 2 thin films
  98. Novel composites of Zn 1−x Cd x O (x = 0, 0.05, 0.1) thick films for optoelectronic device application
  99. Synthesis and enhanced photocatalytic activity of Zr-doped N-TiO 2 nanostructures
  100. Microstructural evolution of a TC11 titanium alloy during linear friction welding
  101. First-principles study of Si and Mg segregation in grain boundaries in Al and Cu: application of local-energy decomposition
  102. Hierarchical description of deformation in block copolymer TPEs
  103. Preparation and characterization of CeO 2 decorated TiO 2 nanotube arrays photoelectrode and its enhanced photoelectrocatalytic efficiency for degradation of methyl orange
  104. Adhesion characteristics of Cu/Ni–Cr/polyimide flexible copper clad laminates according to Ni:Cr ratio and Cu electroplating layer thickness
  105. FCC to HCP transformation kinetics in a Co–27Cr–5Mo–0.23C alloy
  106. Synthesis of PbSe nanostructures with different size and morphology and their electrochemical properties
  107. Direct synthesis and hydrogen storage behaviors of nanocrystalline Na 2 LiAlH 6
  108. Effect of friction stir processing on mechanical and microstructural properties of AM60B Magnesium alloy
  109. Microstructures and properties of Sn58Bi, Sn35Bi0.3Ag, Sn35Bi1.0Ag solder and solder joints
  110. Influence of Ti doping on the superconducting properties of YBa 2 (Cu 3−x Ti x )O 7−δ materials
  111. Ferroelectric properties and the origin of the magnetism in the Bi 6 Fe 2 Ti 3 O 18 thin films
  112. Structure and charge density of Ce doped gadolinium gallium garnet (GGG)
  113. A novel poling technique to obtain excellent piezoelectric properties of Pb(Mg 1/3 Nb 2/3 )O 3 –0.32PbTiO 3 single crystals
  114. The preparation, cytocompatibility, and in vitro biodegradation study of pure β-TCP on magnesium
  115. Properties of pulse electrodeposited copper gallium sulphide films
  116. Effects of Al 2 O 3 particle reinforcement on the lubricated sliding wear behavior of ZA-27 alloy composites
  117. PEG-assisted hydrothermal synthesis and luminescent properties of ZnWO 4 :Sm 3+ white light-emitting phosphors
  118. Toxicity assessment of engineered Mn–ZnS quantum dots in vitro
  119. Cobalt substituted ZnO thin films: a potential candidate for spintronics
  120. Indium rich InGaN solar cells grown by MOCVD
  121. Novel thieno[3,4-c]pyrrole-4,6-dione-based conjugated copolymers with donor–acceptor structures
  122. Raman scattering characterization of Ge-composition in bulk Si 1− x Ge x with compositional variation
  123. Influence of the annealing temperature on violet emission of ZnO films obtained by oxidation of Zn film on quartz glass
  124. SiC nanofibers by pyrolysis of electrospun preceramic polymers
  125. Flammability and tensile properties of polylactide nanocomposites with short carbon fibers
  126. Control of porous structure in flexible silicone aerogels produced from methyltrimethoxysilane (MTMS): the effect of precursor concentration in sol–gel solutions
  127. Pharmaceutical microparticle engineering with electrospraying: the role of mixed solvent systems in particle formation and characteristics
  128. Preparation and characterization of biphasic calcium phosphate ceramics of desired composition
  129. Electronic and optical properties of (Al x Ga 1− x ) 1− y Mn y As single crystal: a new candidate for integrated optical isolators and spintronics
  130. Surface and bulk exciton recombination dynamics in GaN freestanding films via one- and two-photon excitations
  131. Single source precursor for vacuum evaporation of MoBi 2 Se 5 photoactive thin films
  132. Dielectric and thermal properties of CCTO/epoxy composites for embedded capacitor applications: mixing and fabrication methods
  133. Safety and efficacy of a novel abluminal groove-filled biodegradable polymer sirolimus-eluting stent
  134. A controlled solvethermal approach to synthesize nanocrystalline iron oxide for congo red adsorptive removal from aqueous solutions
  135. Influence of Tm 2 O 3 doping on structural and electrical properties of ZnO
  136. Oxidation resistance of hafnium diboride—silicon carbide from 1400 to 2000 °C
  137. Preparation of barium titanate nanocube particles by solvothermal method and their characterization
  138. High magnetic field controlled interdiffusion behavior at Bi-Bi 0.4 Sb 0.6 liquid/solid interface
  139. Highly efficient dye sensitized solar cells based on a novel ruthenium sensitizer
  140. Artifact level produced by different femoral head prostheses in CT imaging: diamond coated silicon nitride as total hip replacement material
  141. Lamellar orientation in the blends of linear low density polyethylene and isotactic polypropylene induced by dynamic packing injection molding
  142. Profile of the wafer level ECD gold bumps under variable parameters
  143. Densification of (Na,K)NbO 3 piezoelectric ceramics by two-step mixing process
  144. Theoretical ELNES spectra of Si-K, Si-L, N-K, and O-K edges of an intergranular glassy film model in β-Si 3 N 4
  145. Micromechanical modelling of poly(ethylene terephthalate) using a layered two-phase approach
  146. Role of annealing temperature on microstructural and electro-optical properties of ITO films produced by sputtering
  147. Microstructural evolution of bulk nanocrystalline Ni during creep
  148. Electrical, electrochemical and photo-electrochemical studies on the electrodeposited n-type semiconductor hexagonal crystalline CdS thin film on nickel substrate
  149. A study on the synthesis of nanostructured WC–10 wt% Co particles from WO 3 , Co 3 O 4 , and graphite
  150. Electrical properties and stability of Dy 2 O 3 -doped ZnO–Pr 6 O 11 -based varistors
  151. Reduction–adsorption behavior of platinum ions on activated carbon fibers
  152. Statistical quantification of the microstructural homogeneity of size and orientation distributions
  153. Evolution of the electronic structure and properties of neutral and charged arsenic clusters
  154. Synthesis of monodisperse poly(styrene- co -divinylbenzene) microspheres with binary porous structures and application in high-performance liquid chromatography
  155. Nonstoichiometry in line compounds
  156. Copper diffusion in germanium: connecting point defect parameters with bulk properties
  157. Production of single and multi-walled carbon nanotubes using natural gas as a precursor compound
  158. Preparation and properties of BaTiO 3 filled butyl rubber composites for flexible electronic circuit applications
  159. Electrical conductivity enhancement of a polymer using butyl glycidyl ether (BGE)–lithium hexafluorophosphate (LiPF 6 ) complex
  160. Mechanical properties and microstructure of Al 2 O 3 /mullite composite
  161. Ca 4 La 2 Ti 5 O 17 : a novel low loss dielectric ceramics in the CaO–La 2 O 3 –TiO 2 system
  162. Comment on “preparation and electrorheology of new mesoporous polypyrrole/MCM-41 suspensions”
  163. Electrical properties of Y-modified Pb(SnTi)O 3 ferroelectric ceramics
  164. Temperature effects on the fatigue of highly filled PMMA
  165. Synthesis and characterization of Ba 0.7 Sr 0.3 TiO 3 , BaZr 0.3 Ti 0.7 O 3 thin film heterostructures
  166. Solid-state method for incorporation of lead sulfide nanoplates in poly(3,4-ethylenedioxythiophene) matrix as NIR materials
  167. Plasma-based processes and thin film equipment for nano-scale device fabrication
  168. Peptide immobilization on polyethylene terephthalate surfaces to study specific endothelial cell adhesion, spreading and migration
  169. A rapid method for investigating the absorption of formaldehyde from air by wool
  170. Solid-state method for incorporation of lead sulfide nanoplates in poly(3,4-ethylenedioxythiophene) matrix as NIR materials
  171. Oxidation behavior of the TiNi shape memory alloy with a laser surface melted layer
  172. Emitter passivation of silicon solar cell via organic coating at room temperature
  173. Insights into the power law relationships that describe mass deposition rates during electrospinning
  174. Synthesis, characterization and growth mechanism of ZnO nanowires on NiCl 2 -coated Si substrates
  175. Annealing behavior of TiO 2 -sheathed Ga 2 O 3 nanowires
  176. Failure behaviors of BGA solder joints under various loading conditions of high-speed shear test
  177. In vitro and in vivo evaluation of the effects of demineralized bone matrix or calcium sulfate addition to polycaprolactone–bioglass composites
  178. Nucleation and growth mechanism of apatite on a bioactive and degradable ceramic/polymer composite with a thick polymer layer
  179. Thermal stability and oxidation behavior of Al-containing nanocrystalline powders produced by cryomilling
  180. Mechanical properties and water uptake of epoxy–clay nanocomposites containing different clay loadings
  181. Effect of the interface bonding on the mechanical response of aluminium foam reinforced steel tubes
  182. Photocatalytic decomposition of methylene blue via Fenton mechanisms by silicon wafer doped with Au and Cu: a theoretical and experimental study
  183. Effects of glass additions on the dielectric properties and energy storage performance of Pb 0.97 La 0.02 (Zr 0.56 Sn 0.35 Ti 0.09 )O 3 antiferroelectric ceramics
  184. Structure and temperature-stability of piezoelectric properties of K 0.5 Na 0.5 NbO 3 –LiSbO 3 –Al(Fe 0.9 Mn 0.1 )O 3 lead-free ceramics
  185. High speed and low power consumption of superlattice-like Ge/Sb 70 Se 30 thin films for phase change memory application
  186. UPRM-5 titanium silicates prepared using tetrapropylammonium and tetrabutylammonium cations: framework stability, textural properties, and carbon dioxide adsorption
  187. Giant dielectric and electrical properties of sodium yttrium copper titanate: Na 1/2 Y 1/2 Cu 3 Ti 4 O 12
  188. Osteoblast attachment to hydroxyapatite micro-tube scaffolds
  189. Microstructure, optical and photoelectron-chemical properties of TiO 2 microspheres prepared by hydrothermal method
  190. In situ synthesis of high-density contact-free Ag-nanoparticles for plasmon resonance polystyrene nanocomposites
  191. Comparing photocatalytic activities of commercially available iron-doped and iron-undoped aeroxide TiO 2 P25 powders
  192. Gold-functionalized graphene as conductive filler in UV-curable epoxy resin
  193. Optical and magnetic investigation of Co-doped-TiO 2 : various morphologies of titanium dioxide nanostructures
  194. Microstructure and thermal expansion behavior of spray-formed Al–27Si alloy used for electronic packaging
  195. The synthesis of large area graphene/carbon nanotubes as additive material and their enhanced specific capacitance
  196. Hydrolysis of monetite/chitosan composites in α-MEM and SBF solutions
  197. Effect of deposition temperature on structural, microstructural and magnetic properties of CoFe 2 O 4 thin films deposited by pulsed laser deposition
  198. Effect of humidity treatment on the structure and photocatalytic properties of titania mesoporous powder
  199. Complete photocatalytic mineralization of Nile blue on hetero-structured CoTiO 3 nano-composite coated on glass in a sol–gel process using diethylene glycol as stabilizer: effect of charge separation and calcination temperature on activity
  200. Nanocrystalline copper selenide thin films by chemical spray pyrolysis
  201. Synthesis and characterization of NiMoO 4 via ultrasonic route by a novel precursor
  202. Correlation between changes in Curie temperature and electrical resistivity during structural relaxation in Fe 27 Ni 53 P 14 B 6 metallic glass
  203. Effects of AlN buffer on the physical properties of GaN films grown on 6H-SiC substrates
  204. Glass structure of the CaO–B 2 O 3 –SiO 2 –Al 2 O 3 –ZnO glasses system with different Si content
  205. Apatite-forming PEEK with TiO 2 surface layer coating
  206. Effects of substrate temperatures on the thermal stability of Al-doped ZnO thin films grown by DC magnetron sputtering
  207. Synthesis, characterization, and microwave dielectric properties of monoclinal structure ZnZrNb 2 O 8 ceramics through the aqueous sol–gel process
  208. Thermal stability and mechanical properties of nanocrystalline Fe–Ni–Zr alloys prepared by mechanical alloying
  209. Preparation and properties of coke powder activated carbon/α-Co(OH) 2 composite electrode materials
  210. Experimental and numerical analysis of hot tearing susceptibility for Mg–Y alloys
  211. Improved the electrochemical property of multiwall carbon nanotubes by mesophase pitch fluoride coating
  212. Structural, optical and magnetic properties of Cr doped In 2 O 3 powders and thin films
  213. Surface silver-doping of biocompatible glass to induce antibacterial properties. Part I: massive glass
  214. Optical properties of nanocrystalline silicon deposited by PECVD
  215. Effect of sepiolite on nonisothermal crystallization kinetics of polypropylene
  216. Phase orientation, interface structure, and properties of aged Cu-6 wt.% Ag
  217. Subcritical crack growth in SiAlON ceramics from a modified static lifetime test including multiple use of survivals
  218. Luminescent properties of sol–gel processed red-emitting phosphor Eu 3+ , Bi 3+ co-doped (Ca,Sr)(Mo,W)O 4
  219. Large-scale electrochemical synthesis of SnO 2 nanoparticles
  220. Stress measurement using area detectors: a theoretical and experimental comparison of different methods in ferritic steel using a portable X-ray apparatus
  221. Effects of B 2 O 3 additive on sintering behavior and microwave dielectric properties of LaAlO 3 -doped MgTiO 3 –CaTiO 3 ceramics
  222. Concentration-driven structural stability and dielectric dispersion in lead free (Ba 1−x Sc 2x/3 )Zr 0.3 Ti 0.7 O 3 ceramics
  223. Design of Cu–Ce co-doped TiO 2 for improved photocatalysis
  224. Reverse transformation of deformation-induced martensite in austenitic stainless steel studied by positron annihilation
  225. Tunable electronic structures and magnetism in arsenene nanosheets via transition metal doping
  226. Synthesis and characterization of sol–gel derived (Ba,Ca)(Ti,Zr)O 3 nanoparticles
  227. Investigations of doping induced structural, optical and magnetic properties of Ni doped ZnS diluted magnetic semiconductors
  228. N -chloramide modified Nomex ® as a regenerable self-decontaminating material for protection against chemical warfare agents
  229. Strain induced structural phase transition in NaNbO 3 doped BiFeO 3
  230. Microstructure and mechanical properties of brazed titanium/steel joints
  231. Strain induced structural phase transition in NaNbO 3 doped BiFeO 3
  232. Switching in structural, optical, and magnetic properties of self-assembled Co-doped ZnO: effect of Co-concentration
  233. Optical properties of Ag doped ZnO nanocrystals prepared by hydrothermal and photodeposition method
  234. New type of low-dielectric composites based on o -cresol novolac epoxy resin and mesoporous silicas: fabrication and performances
  235. Isothermal crystallization kinetics and morphology of biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate)
  236. Enhanced photocatalytic activity of BiFeO 3 particles by surface decoration with Ag nanoparticles
  237. Long-term in vivo experimental investigations on magnesium doped hydroxyapatite bone substitutes
  238. An estimation of the reflectivity of gold- and platinum-group metals alloyed with copper
  239. The influence of deformation by equal-channel angular pressing on the ageing response and precipitate fracturing: case of the Al–Ag alloy
  240. Comparison study of silicon carbide coatings produced at different deposition conditions with use of high temperature nanoindentation
  241. Core–shell-structured cross-linked poly(glycidyl methacrylate)-coated carbonyl iron microspheres and their magnetorheology
  242. Influence of filament-to-substrate distance on the spectroscopic, structural and optical properties of silicon carbide thin films deposited by HWCVD technique
  243. Structural, optical and ferroelectric behavior of pure BiFeO 3 thin films synthesized by the sol–gel method
  244. Improved mechanical properties of carbon nanotubes-coated flax fiber reinforced composites
  245. A TEM study of the combined effect of severe plastic deformation and (Zr), (Sc+Zr)-containing dispersoids on an Al–Mg–Si alloy
  246. Comparison of two polymeric carrier formulations for controlled release of hydrophilic and hydrophobic drugs
  247. Sorption and diffusion of arenes through poly (ethylene-co-vinyl acetate) membranes
  248. Influence of nitrogen gas flow rate on the structural, morphological and electrical properties of sputtered TiN films
  249. Investigation of ammonium diuranate calcination with high-temperature X-ray diffraction
  250. Synthesis and characterization of iron and iron nitride microtubes obtained from biogenic iron oxide
  251. Chemical modification and wetting of medium density fibreboard produced from heat-treated fibres
  252. Contribution to quantification of highly inhomogeneous microstructures
  253. h -MoO 3 microrods grown on wood substrates through a low-temperature hydrothermal route and their optical properties
  254. Influence of ultrasonic melt treatment on the formation of primary intermetallics and related grain refinement in aluminum alloys
  255. Electrospun antimicrobial microfibrous scaffold for annulus fibrosus tissue engineering
  256. Apparently complete grain boundary wetting in Cu–In alloys
  257. Effect of Ho 3+ substitution on magnetic and microwave absorption properties of Sr(ZnZr) 0.5 Fe 12 O 19 hexagonal ferrite nanoparticles
  258. Effect of nanoclay addition on the displacement-controlled flexural fatigue behavior of a polymer
  259. The electromagnetic properties of dilute magnetic GeSi:Mn quantum rings
  260. Improving the performance of ternary bulk heterojunction polymer cell by regioregular poly (3-hexylthiophene)-grafted oxide graphene on in situ doping of CdS
  261. Topographically induced self-deformation of the nuclei of cells: dependence on cell type and proposed mechanisms
  262. Monitoring cellular behaviour using Raman spectroscopy for tissue engineering and regenerative medicine applications
  263. Bacterial cellulose whisker as a reinforcing filler for carboxylated acrylonitrile-butadiene rubber
  264. Investigating the influence of ZnO nanowires on the interfacial micro-mechanical behavior of carbon fiber/epoxy microdroplet structures using micro-Raman spectroscopy
  265. Application of Ni and Cu nanoparticles in transient liquid phase (TLP) bonding of Ti-6Al-4V and Mg-AZ31 alloys
  266. Enhanced energy storage density performance in (Pb 0.97 La 0.02 )(Zr 0.5 Sn 0.44 Ti 0.06 )–BiYO 3 anti-ferroelectric composite ceramics
  267. Preparation and conductive mechanism of copper nanoparticles ink
  268. Directional solidification and characterization of InBi 1−x Sb x crystals
  269. Si 3 N 4 /Mg composites with an interpenetrating network
  270. High-boiling-point solvent synthesis of mesoporous NiCo 2 S 4 with high specific surface area as supercapacitor electrode material
  271. Influence of ion-beam sputtering deposition parameters on highly photosensitive and transparent CdZnO thin films
  272. Varistor and giant permittivity properties of SnO 2 –Zn 2 SnO 4 ceramic matrix composites
  273. Defect based violet–blue emission of Mg doped ZnO annealed at different temperatures
  274. The influence of copper addition on microstructure and mechanical properties of thermomechanically processed microalloyed steels
  275. Wettability and transient liquid phase bonding of hafnium diboride composite with Ni–Nb alloys
  276. Prolonging the combustion duration of wood by TiO 2 coating synthesized using cosolvent-controlled hydrothermal method
  277. Effects of microstructure on optimum heat treatment conditions in metal-matrix composites
  278. Different electric-field dependences of geminate and nongeminate recombination in photoluminescence of a-Si:H
  279. Micron-scale indentation of amorphous and drawn PET surfaces
  280. Upconversion luminescent materials of Y–Gd oxysulfide binary system codoped with Yb and Er
  281. Dielectric behaviour of glycidyl methacrylatebutyl methacrylate copolymers
  282. Room-temperature multiferroic properties and magnetoelectric coupling in Bi 4− x Sm x Ti 3− x Co x O 12− δ ceramics
  283. Structural investigations of V 2 O 5 –P 2 O 5 –CaO glass system by FT-IR and EPR spectroscopies
  284. Effect of graphene dispersion on the equilibrium structure and deformation of graphene/eicosane composites as surrogates for graphene/polyethylene composites: a molecular dynamics simulation
  285. Glycolic acid-functionalized chitosan–Co 3 O 4 –Fe 3 O 4 hybrid magnetic nanoparticles-based nanohybrid scaffolds for drug-delivery and tissue engineering
  286. Cellulose film regenerated from Styela clava tunics have biodegradability, toxicity and biocompatibility in the skin of SD rats
  287. Plastic deformation mechanism of crystalline polymer materials during the rolling process
  288. Microwave dielectric properties of low-fired CoNb 2 O 6 ceramics with B 2 O 3 addition
  289. Facile synthesis of ordered mesoporous silica with high γ-Fe 2 O 3 loading via sol-gel process
  290. Newly developed biodegradable polymer nanocomposites of cellulose acetate and Al 2 O 3 nanoparticles with enhanced dielectric performance for embedded passive applications
  291. Specific heat of the Ba 0.7 Sr 0.3 Ti 1− y Zr y O ( y = 0, 0.03, 0.05, 0.1) ferroelectric ceramics obtained by the temperature relaxation method
  292. Facile synthesis of high performance non-noble-metal electrocatalyst Fe–N–S/C for oxygen reduction reaction in acidic solutions
  293. Preparation and characterization of water soluble and conducting poly(sodium 4-styrenesulfonate) doped poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotubes core–shell nanocomposites by in situ polymerization
  294. A strategy for improving mechanical properties of composite nanofibers through surface functionalization of fillers with hyperbranched polyglycerol
  295. Internal melting and coarsening of liquid droplets in an Al–Cu alloy: a 4-D experimental study
  296. Effect of water on the fatigue behaviour of a pa66/glass fibers composite material
  297. Improved magnetism in Cr doped ZnS nanoparticles with nitrogen co-doping synthesized using chemical co-precipitation technique
  298. Adsorption kinetics, isotherm, and thermodynamics of Hg 2+ to polyaniline/hexagonal mesoporous silica nanocomposite in water/wastewater
  299. Wood—a 45th anniversary review of JMS papers. Part 1: The wood cell wall and mechanical properties
  300. Preparation, in vitro and in vivo evaluation of mPEG-PLGA nanoparticles co-loaded with syringopicroside and hydroxytyrosol
  301. Phase selection of titanium boride in copper matrix composites during solidification
  302. Impact factors, citation distributions and journal stratification
  303. Effects of crosslinking ratio, model drugs, and electric field strength on electrically controlled release for alginate-based hydrogel
  304. Synthesis and lithium storage properties of interconnected fullerene-like carbon nanofibers encapsulated with tin nanoparticles
  305. Structure and crystallization behavior of borate-based bioactive glass
  306. Influence of organic salt concentration on the performance of bulk heterojunction organic solar cell
  307. Synthesis of superparamagnetic cobalt nanoparticles through solvothermal process
  308. Formation mechanism of NaNbO 3 powders during hydrothermal synthesis
  309. Development of n-type microcrystalline SiO x :H films and its application by innovative way to improve the performance of single junction µc-Si:H solar cell
  310. Development of a Sn–Ag–Cu solder reinforced with Ni-coated carbon nanotubes
  311. Oxygen incorporation in Ti 2 AlC thin films studied by electron energy loss spectroscopy and ab initio calculations
  312. Mechanical and tribological behavior of clay–polypropylene nanocomposites
  313. Development of multiferroic polymer nanocomposite from PVDF and (Bi 0.5 Ba 0.25 Sr 0.25 )(Fe 0.5 Ti 0.5 )O 3
  314. Low-temperature thermoelectric characteristics of Ca 3−x Yb x Co 3.95 Ga 0.05 O 9+δ (0 ≤ x ≤ 0.10)
  315. Ibuprofen loaded porous calcium phosphate nanospheres for skeletal drug delivery system
  316. Rolling and recrystallisation textures in Cu–Al, Cu–Mn and Cu–Ni alloys
  317. Dissolutive wetting of Si by molten Cu
  318. Room temperature elastic moduli and Vickers hardness of hot-pressed LLZO cubic garnet
  319. Effect of the substrate temperature on the structural, optical and electrical properties of spray-deposited CdS:B films
  320. New insights into the crystallization of cordierite from a stoichiometric glass by in situ high-temperature SEM
  321. Micro-porous silicon structure with low optical reflection
  322. PEDOT:PSS/graphene/PEDOT ternary film for high performance electrochemical electrode
  323. Microstructure, electrical and magnetic properties of polycrystalline La 0.85 K 0.15 MnO 3 manganites prepared by different synthesis routes
  324. BiB 3 O 6 :Pr 3+ partially crystallized glasses for second harmonic generation
  325. Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs)
  326. An effective three-dimensional surface-enhanced Raman scattering substrate based on oblique Si nanowire arrays decorated with Ag nanoparticles
  327. High-frequency response in Sr 1−x Ca x TiO 3 powders studied by terahertz time-domain spectroscopy
  328. Structural and composition analysis of Apex™ and Foturan™ photodefinable glasses
  329. Influencing biophysical properties of fibrin with buffer solutions
  330. A new method of depositing high figure-of-merit porous PZT pyroelectric thick film using [001]-oriented PZT nanorod by electrophoresis deposition
  331. Mechanisms of stress-corrosion cracking and liquid-metal embrittlement in Al-Zn-Mg bicrystals
  332. Self-dissolving micropile array tips for percutaneous administration of insulin
  333. Investigation of Er-doped Sc 2 O 3 transparent ceramics by positron annihilation spectroscopy
  334. Electrochemical investigation of silicon/carbon composite as anode material for lithium ion batteries
  335. Low temperature sintering and properties of lead-free (Ba 0.85 Ca 0.15 )(Zr 0.1 Ti 0.9 )O 3 ceramics with Ba(Cu 0.5 W 0.5 )O 3 addition
  336. Electrical characteristics of Au/n-Si (MS) Schottky Diodes (SDs) with and without different rates (graphene + Ca 1.9 Pr 0.1 Co 4 O x -doped poly(vinyl alcohol)) interfacial layer
  337. Composition control of co-electroplating Au–Sn deposits using experimental strategies
  338. On the triggering mechanism for the metal–insulator transition in thin film VO 2 devices: electric field versus thermal effects
  339. Influence of thermal treatment on the nonlinear current–voltage behavior and restoration hysteresis effect of CaCu 3 Ti 4 O 12 thin films
  340. Dental casting alloys behaviour during power toothbrushing with toothpastes with various abrasivities. Part I: wear behavior
  341. Atomic layer deposition of hafnium oxide dielectrics on silicon and germanium substrates
  342. Size dependence of the contact angle of liquid clusters of Bi and Sn supported on SiO 2 , Al 2 O 3 , graphite, diamond and AlN
  343. Controlled fabrication of noble metal nanoparticles loaded on the surfaces of cyclotriphosphazene-containing polymer nanotubes
  344. Fabrication, chemical composition change and phase evolution of biomorphic hydroxyapatite
  345. Preparation and performance of organic–inorganic halide perovskites
  346. Fabrication of an aluminum–carbon nanotube metal matrix composite by accumulative roll-bonding
  347. Mechanical properties of chromium–chromium sulfide cermets fabricated by self-propagating high-temperature synthesis
  348. Application of power loss calculation to estimate the specific contact resistance of the screen-printed silver ohmic contacts of the large area silicon solar cells
  349. Chain flexibility versus molecular entanglement response to rubbing deformation in designing poly(oxadiazole-naphthylimide)s as liquid crystal orientation layers
  350. Improvement of photopolymer materials for holographic data storage
  351. Fabrication and characterization of Li 0.5 Fe 2.5 O 4 octahedrons via a TEA-assisted route
  352. Monoclinic effects and orthotropic estimation for the behaviour of rolled sheet
  353. Prediction of no-recrystallization temperature by simulation of multi-pass flow stress curves from single-pass curves
  354. Microstructural and electrical properties of PbTIO 3 screen-printed thick films
  355. Enhanced photocatalytic activity of Mg 0.05 Zn 0.95 O thin films prepared by sol–gel method through a cycle
  356. Using deformation mechanism maps to depict flow processes in superplastic ultrafine-grained materials
  357. Principles of grain refinement in magnesium alloys processed by equal-channel angular pressing
  358. A review of carbon dots in biological applications
  359. Methotrexate-grafted-oligochitosan micelles as drug carriers: synthesis and biological evaluations
  360. Synthesis and temperature dependent photoluminescence of Zn 1− x Mg x O films grown by ultrasonic spray pyrolysis
  361. Influence of dopants on the thermal properties and critical behavior of the ferroelectric transition in uniaxial ferroelectric Sn 2 P 2 S 6
  362. Influence of light polymerization modes on degree of conversion and crosslink density of dental composites
  363. Effect of CaF 2 on the sintering and thermal expansion of La 0.85 Sr 0.15 Cr 0.95 O 3
  364. Effect of modified MWCNT on the properties of PPO/LCP blend
  365. Effect of stacking type in precursors on composition, morphology and electrical properties of the CIGS films
  366. Equilibrium and non-equilibrium charge-dependent quantification of endothelial cell hydrogel scaffolds
  367. New insight into PEO modified inner surface of HNTs and its nano-confinement within nanotube
  368. Microstructure and wear properties of LENS ® deposited medical grade CoCrMo
  369. Reaction synthesis of in situ vanadium carbide particulates-reinforced iron matrix composites by spark plasma sintering
  370. Effects of Cr 2 O 3 doping on the microstructural and electrical properties of ZnO–Bi 2 O 3 based varistor films
  371. Diffraction-line shifts and broadenings in continuously and discontinuously coarsening precipitate-matrix systems: coarsening of initially coherent nitride precipitates in a ferrite matrix
  372. Conversion of waste animal bones into porous hydroxyapatite by alkaline treatment: effect of the impregnation ratio and investigation of the activation mechanism
  373. Nanomechanical properties of the stigma of dragonfly Anax parthenope julius Brauer
  374. Three-dimensional NiCo 2 S 4 nanosheets as high-performance electrodes materials for supercapacitors
  375. Optical characterisation of silicon nitride thin films grown by novel remote plasma sputter deposition
  376. In situ synthesis of CuS nanoparticle with a distinguishable SPR peak in NIR region
  377. First principles investigation of the structure and stability of LiNiO 2 doped with Co and Mn
  378. Preparation and characteristic of magnetic LDPE/Fe 3 O 4 nano-composite films
  379. BaTiO 3 (BTO)–CaCu 3 Ti 4 O 12 (CCTO) substrates for microwave devices and antennas
  380. Comparative study of electrical and mechanical properties of fire-refined and electrolytically refined cold-drawn copper wires
  381. Sol-gel synthesis and characterization of the photocatalyst BaCo 1/3 Nb 2/3 O 3
  382. On the use of non-MPB lead zirconium titanate (PZT) granules for piezoelectric ceramic–polymer sensorial composites
  383. The effect of photo-oxidation on thermal and fire retardancy of polypropylene nanocomposites
  384. Comparison of tensile and knot security properties of surgical sutures
  385. Precipitation behavior of Heusler phase (Ni 2 AlHf) in multiphase NiAl alloy
  386. Enhanced wear and fatigue properties of Ti–6Al–4V alloy modified by plasma carburizing/CrN coating
  387. Effect of particle surface treatment and blending method on flexural properties of injection-molded cenosphere/HDPE syntactic foams
  388. Al x (Sn 2 Se 3 ) 1−x phase change films for high-temperature data retention and fast transition speed application
  389. AFM analysis of the surface of nanoporous membranes: application to the nanofiltration of potassium clavulanate
  390. Comparison of structural, optical, photocatalytic behavior and hydrophilic properties of pure and Sn/La co-doped TiO 2 thin films
  391. Fabrication and finite element modeling of ellipsoidal macro-shells
  392. PMMA nanocomposites and gradient materials prepared by means of polysilsesquioxane (POSS) self-assembly
  393. Dielectric properties of organosilicons from first principles
  394. Effect of replacement of MgO by CaO on sintering, crystallization and properties of MgO–Al 2 O 3 –SiO 2 system glass-ceramics
  395. Supercritical CO 2 processing of polymers for the production of materials with applications in tissue engineering and drug delivery
  396. Mesoporous silica nanoparticle-functionalized poly(methyl methacrylate)-based bone cement for effective antibiotics delivery
  397. Synthesis and characterization of thin films of palladium (II) phthalocyanine and its derivatives using the thermal evaporation technique
  398. Growth and characterization of well-aligned rutile TiO 2 nanocrystals on sapphire substrates via metal organic vapour deposition
  399. Quantitative proteomics reveals altered expression of extracellular matrix related proteins of human primary dermal fibroblasts in response to sulfated hyaluronan and collagen applied as artificial extracellular matrix
  400. Anatase TiO 2 nanoparticles/carbon nanotubes nanofibers: preparation, characterization and photocatalytic properties
  401. Influence of interstitial impurities on the valence electron structures and phase transformation behavior in intermediate Ti–Al alloys
  402. Investigation of the lithium-rich boundary of the Li 1+ x Mn 2− x O 4 cubic spinel phase in air
  403. Strength of functionally designed cellular cemented carbides produced by coextrusion
  404. Fabrication of bioactive hydroxyapatite/bis-GMA based composite via three dimensional printing
  405. Fabrication of Y 2 O 2 S:Eu 3+ hollow nanofibers by sulfurization of Y 2 O 3 :Eu 3+ hollow nanofibers
  406. Organic solvent based TiO 2 dispersion paste for dye-sensitized solar cells prepared by industrial production level procedure
  407. Rietveld analysis, magnetic, vibrational and impedance properties of (Bi 1−x Pr x )(Fe 1−x Zr x )O 3 ceramics
  408. Microstructure and microwave dielectric properties of Ba 4.2 Nd 9.2 Ti 18−x Sn x O 54 (x = 0, 0.25, 0.5, 1, 1.5, 2) ceramics
  409. Influence of cross-linking density on swelling and estradiol permeation of chitosan membranes
  410. Biomechanical characterisation of a degradable magnesium-based (MgCa0.8) screw
  411. The effect of substrate temperature on the microstructure and tunnelling magnetoresistance of FeCo–Al 2 O 3 nanogranular films
  412. Low-temperature solid-state synthesis and phase-controlling studies of CdS nanoparticles
  413. Effect of buffer thickness on the properties of Al-doped ZnO thin films prepared by DC magnetron sputtering
  414. Cr(VI) removal from aqueous solution using chemically reduced and functionalized graphene oxide
  415. Investigation of the lithium-rich boundary of the Li 1+ x Mn 2− x O 4 cubic spinel phase in air
  416. Coprecipitation synthesis and optical absorption property of Zn 2 Ti x Sn 1– x O 4 (0 ≤  x ≤ 1) solid solutions
  417. Use of chitosan and β-tricalcium phosphate, alone and in combination, for bone healing in rabbits
  418. Supported and unsupported platinum catalysts prepared by a one-step dry deposition method and their oxygen reduction reactivity in acidic media
  419. Surface characterization and biological properties of regular dentin, demineralized dentin, and deproteinized dentin
  420. Structural, optical and electrical properties of gamma-rays exposed selenium nanowires
  421. Fabrication and mechanical testing of porous calcium phosphate bioceramic granules
  422. Tensile properties and fracture behaviour of carbon fibre filament materials
  423. Novel carboxymethyl chitosan-graphene oxide hybrid particles for drug delivery
  424. Influence of interfacial modification on the thermal conductivity of polymer composites
  425. l -cysteine-reduced graphene oxide/poly(vinyl alcohol) ultralight aerogel as a broad-spectrum adsorbent for anionic and cationic dyes
  426. Effects of electromigration on resistance changes in eutectic SnBi solder joints
  427. TiO 2 /porous silicon nanocomposite passivation coating for mc-Si wafers
  428. Three-dimensional nonwoven scaffolds from a novel biodegradable poly(ester amide) for tissue engineering applications
  429. Regulatory biocompatibility requirements for biomaterials used in regenerative medicine
  430. Enhancing mechanical and fracture properties of sandwich composites using nanoparticle reinforcement
  431. Interfacial microstructure and hardness of nickel (Ni) nanoparticle-doped tin–silver–copper (Sn–Ag–Cu) solders on immersion silver (Ag)-plated copper (Cu) substrates
  432. Fabrication and characterization of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF)-Ce 0.9 Gd 0.1 O 1.95 (GDC) composite thick film for anode supported solid oxide fuel cells
  433. Synthesis of doubly functional nanowhiskers from a colloid solution including a V–Ti complex precursor
  434. Synthesis and properties of ellipsoidal hematite/silicone core-shell particles
  435. Impedance spectroscopy study of TiO 2 addition on the ceramic matrix Na 2 Nb 4 O 11
Search Result: