Paper Search Console

Home Search Page About Contact

Journal Title

Title of Journal: Mater Sci

Search In Journal Title:

Abbravation: Materials Science

Search In Journal Abbravation:

Publisher

Springer US

Search In Publisher:

DOI

10.1002/chem.201303802

Search In DOI:

ISSN

1573-885X

Search In ISSN:
Search In Title Of Papers:

Anisotropy of the Mechanical Properties of Degrade

Authors: О Z Student H V Krechkovs’ka
Publish Date: 2012/05/17
Volume: 47, Issue: 5, Pages: 590-597
PDF Link

Abstract

We have investigated the mechanical properties of 15Kh1M1F heatresistant steel after longterm operation in steam pipelines of steam power plants The anisotropy of its strength and plasticity characteristics as a result of degradation has been determined We have established that the number of shutdowns of the process in operation of the steel orientation of specimens axial tangential and radial and their location in sections of pipe walls near their external surface internal surface and at the center of the section influence these parameters The obtained results enable us to justify the choice of the orientation of specimens and their location in sections of pipes to provide the highest sensitivity of characteristics to a change in the technical state of the steel in operation

Keywords:

References

.
Search In Abstract Of Papers:
Other Papers In This Journal:
  1. Effects of sintering aids on the densification of Mo–Si–B alloys
  2. Investigation of nanostructured silicon as a candidate for heat sensitive material
  3. Synthesis, microstructure, and luminescence properties of 3C-SiC powders
  4. Investigation of luminescent properties of red-emitting Ba(Gd,Eu)B 9 O 16 phosphors and the effect of Ca and Sr on its luminescent properties
  5. Effect of SiC particle dispersion on thermal properties of SiC particle-dispersed ZrB 2 matrix composites
  6. Infrared spectroscopic study of water in mesoporous silica under supercritical conditions
  7. Sizes effect of CeSn 3 on the whiskers growth of SnAgCuCe solder joints in electronic packaging
  8. Influence of coated SiC particulates on the mechanical and magnetic behaviour of Fe–Co alloy composites
  9. Crystal structure and optimized microwave dielectric properties of (1 −  x ) LiZn 0.5 Ti 1.5 O 4 – x TiO 2 ceramics for application in dielectric resonator
  10. Studies of structural and magnetic properties of sol–gel synthesized cobalt substituted Zn–Mn chromites
  11. Synthesis and characterization of niobium-doped potassium tetragonal tungsten bronzes, K x Nb y W 1− y O 3
  12. Influences of Ca nonstoichiometry on the superconducting properties of Bi-2212 superconducting bulks
  13. Effect of δ-ferrite co-existence on hot deformation and recrystallization of austenite
  14. A novel AgI/AgIO 3 heterojunction with enhanced photocatalytic activity for organic dye removal
  15. Electrodeposition of Gold Nanoparticles in Dimethylformamide Solutions of H[AuCl 4 ]
  16. Surface energy controlled α–γ–α transformation texture and microstructure character study in ULC steels alloyed with Mn and Al
  17. Impurity effect of Mg on the generalized planar fault energy of Al
  18. Hemocompatibility of styrenic block copolymers for use in prosthetic heart valves
  19. Mechanical stability of retained austenite during plastic deformation of super high strength carbide free bainitic steels
  20. Sequential HAADF-STEM observation of structural changes in Au nanoparticles supported on CeO 2
  21. Sequential HAADF-STEM observation of structural changes in Au nanoparticles supported on CeO 2
  22. Synthesis and characterization of Sn-doped CdZnS nanoparticles
  23. Enhanced frequency upconversion and non-colour tunability in Er 3+ –Yb 3+ codoped TeO 2 –WO 3 –Pb 3 O 4 glasses
  24. Geopolymerisation of low calcium ferronickel slags
  25. Sensitization and radiation hardening of the photostimulable X-ray storage phosphor CsBr:Eu 2+
  26. Synthesis of ZnSnO 3 nanocubes and thin film fabrication of (ZnSnO 3 /PMMA) composite through electrospray deposition
  27. Synthesis of ZnSnO 3 nanocubes and thin film fabrication of (ZnSnO 3 /PMMA) composite through electrospray deposition
  28. Electrochemical reactivity of polyimide and feasibility as a conductive binder for silicon negative electrodes
  29. (111)-Oriented Pb(Zr 0.52 Ti 0.48 )O 3 thin film on Pt(111)/Si substrate using CoFe 2 O 4 nano-seed layer by pulsed laser deposition
  30. Influence of Corrosion on the Effective Resistance of Amperometric Sensor
  31. Structures of a Σ = 9, [110]/{221} symmetrical tilt grain boundary in SrTiO 3
  32. Catalyst Ni-assisted synthesis of interweaved SiO/G/CNTs&CNFs composite as anode material for lithium-ion batteries
  33. Mechanical strength of ceramic scaffolds reinforced with biopolymers is comparable to that of human bone
  34. Synthesis and systematic investigations of Al and Cu-doped ZnO nanoparticles and its structural, optical and photo-catalytic properties
  35. The effects of substrate self-biasing on the growth of Sn-catalysed silicon nanowires grown at low pressure
  36. Sol-gel nanocomposites as metamaterials: preparation and optical measurements
  37. A simple wet chemical route to synthesize ferromagnetic nickel ferrite nanoparticles in the presence of oleic acid as a surfactant
  38. Mechanically alloyed magnesium–boron–iodine composite powders
  39. Magnetic studies of Mn 0.2 Cr 1.8− x Fe x O 3 nano oxides prepared via hydrothermal route
  40. Fifty years of Harper–Dorn creep: a viable creep mechanism or a Californian artifact?
  41. Effect of mixture ratios and nitrogen carrier gas flow rates on the morphology of carbon nanotube structures grown by CVD
  42. Injectability of brushite-forming Mg-substituted and Sr-substituted α-TCP bone cements
  43. Room temperature magneto-optics of nanostructured ZnO:Mn thin film grown by spray pyrolysis
  44. Freeze extrusion fabrication of 13–93 bioactive glass scaffolds for bone repair
  45. Modification of biomaterials surface by mimetic cell membrane to improve biocompatibility
  46. Temperature-dependent complex impedance, electrical conductivity and dielectric studies of M Fe 2 O 4 ( M = Mn, Ni, Zn) ferrites prepared by sintering of mechanochemical synthesized nanopowders
  47. Thermo-optic properties of hybrid sol–gel thin films doped with Rhodamine 6G at high vacuum conditions
  48. Electrical properties of NiFe 2 O 4 epitaxial ultra-thin films
  49. Thermomechanical behavior of a plate composed of layers with different transparencies under the action of thermal radiation
  50. Indentation strength method to determine the fracture toughness of La 0.58 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ and Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ
  51. Spectroscopic properties of Nd 3+ , Yb 3+ -doped and Nd 3+ –Yb 3+ -codoped high silica glass
  52. Response to comments on “Enhancing the Photovoltaic Effect in the Infrared Region by Germanium Quantum Dots Inserted in the Intrinsic Region of a Silicon p-i-n Diode with Nanostructure”
  53. XPS study of palladium sensitized nano porous silicon thin film
  54. Electronic structures of ZnO(0001)-Zn and (000−1)-O polar surfaces
  55. Fabrication and comparative study of top-gate and bottom-gate ZnO–TFTs with various insulator layers
  56. Fabrication and gas-sensing performance of nanorod-assembled SnO 2 nanostructures
  57. Use of tissue transglutaminase and fibronectin to influence osteoblast responses to tricalcium phosphate scaffolds
  58. The effects of dopant impurities on Cu 2 ZnSnS 4 system Raman properties
  59. The impact of the RGD peptide on osteoblast adhesion and spreading on zinc-substituted hydroxyapatite surface
  60. Nano-hydroxyapatite/poly( l -lactic acid) composite synthesized by a modified in situ precipitation: preparation and properties
  61. Decoration of surface-carboxylated graphene oxide with luminescent Sm 3+ -complexes
  62. Hydrogen Permeability and Erosion of W-Pd Bimetallic Systems
  63. Effects of dispersants on dispersion of carbon nanotubes and properties of fluorocarbon resin nanocomposites
  64. A non-destructive method for thickness measurement of thin electrospun membranes using white light profilometry
  65. Interface science of thermal barrier coatings
  66. Pitting resistance of 06KhN28MDT alloy in chloride-containing media
  67. Study of hot deformation behaviour of 2205 duplex stainless steel through hot tension tests
  68. Influence of heat treatment process on photocatalytic activity of photocatalyst TiO 2 /TiC x O y coatings during heat treatment in carbon powder
  69. Collapse of towers as applied to September 11 events
  70. Silicon photonic waveguides for mid- and long-wave infrared region
  71. Incorporation of epoxy resin and carbon nanotube into silica/siloxane network for improving thermal properties
  72. Influence of carbon fibre treatment and filler addition on porosity and structure change of carbon fibres reinforced phenolic matrix composites during carbonization
  73. Electrochemical synthesis and characterization of zinc selenide thin films
  74. Vacuum arc deposition of Al 2 O 3 –ZrO 2 coatings: arc behavior and coating characteristics
  75. Electrochemical characteristics of electric-arc aluminum coatings on AZ31 magnesium alloy
  76. Characterization of superconducting Fe y (Se 1− x Te x ) thin films deposited on MgO substrates by sputtering
  77. Poly ( d , l -lactide)/nano-hydroxyapatite composite scaffolds for bone tissue engineering and biocompatibility evaluation
  78. Fabrication of silicon carbide composites with carbon nanofiber addition and their fracture toughness
  79. Micro void growth in NiSnP layer between (Cu,Ni) 6 Sn 5 intermetallic compound and Ni 3 P by higher reflow temperature and multiple reflow
  80. Synthesis and characterization of Ag/AgCl/Bi 2 Zr 2 O 7 photocatalyst with enhanced visible-light-driven photocatalytic performance
  81. Effects of ZnO nanoneedles addition on the mechanical and piezoelectric properties of hard PZT-based composites
  82. The effect of Si and microstructure evolution on the thermal expansion properties of Fe–42Ni–Si alloy strips
  83. The oxidation process of NiSi x film at high temperature in air and the antioxidant effect of SiO x N y /NiSi x film
  84. Stretch formability of Mn-free AZ31 Mg alloy rolled at high temperature (723 K)
  85. Layered zinc hydroxide–ibuprofen nanohybrids: synthesis and characterization
  86. Effect of substitution of sand stone dust for quartz and clay in triaxial porcelain composition
  87. Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part I—Low Si/Al ratio systems
  88. Structural, optical and microscopic properties of chemically deposited Mo 0.5 W 0.5 Se 2 thin films
  89. Infrared and microwave shielding of transparent Al-doped ZnO superlattice grown via atomic layer deposition
  90. Bone-like apatite coating on Mg-PSZ/Al 2 O 3 composites using bioactive systems
  91. Ferroelectric transitions in valence compensated Ba 1− x La x Ti 1− x Cr x O 3 ceramics
  92. Characterization of clay composite ballistic witness materials
  93. Preparation and structural investigation of nanostructured oxide dispersed strengthened steels
  94. Design and characterization of bioceramic coating materials for Ti6Al4V
  95. Synthesis of water soluble chromophore with A–π–D–π–A structures
  96. Effect of Co doping on the structural and optical properties of ZnO nanospindles synthesized by co-precipitation method
  97. Preparation of porous spherical ZrO 2 –SiO 2 composite particles using templating and its solid acidity by H 2 SO 4 treatment
  98. Thermoluminescence and induced absorption in X-ray-irradiated CdS-doped glasses
  99. Vapor–solid synthesis and enhanced thermoelectric properties of non-planar bismuth selenide nanoplates on graphene substrate
  100. Effect of sintering temperature on dielectric properties, vibrational modes and crystal structures of Ba[(Ni 0.7 Zn 0.3 ) 1/3 Nb 2/3 ]O 3 ceramics
  101. Mesostructure optimization in multi-material additive manufacturing: a theoretical perspective
  102. Hardness and density profile of surface densified and thermally modified Scots pine in relation to degree of densification
  103. Depth profile XPS analysis of polymeric materials by C 60 + ion sputtering
  104. Development of Plastic Strips in the Process of Shear Deformation of a Body with Narrow Rectangular Slot
  105. Relaxor behavior of (1 − x )BaTiO 3 – x (Bi 3/4 Na 1/4 )(Mg 1/4 Ti 3/4 )O 3 (0.2 ≤ x ≤ 0.9) ferroelectric ceramic
  106. Thermal and structural study of nanocrystalline Fe(Co)NiZrB alloys prepared by mechanical alloying
  107. Using chondroitin sulfate to improve the viability and biosynthesis of chondrocytes encapsulated in interpenetrating network (IPN) hydrogels of agarose and poly(ethylene glycol) diacrylate
  108. Nitrogen doping of SiC thin films deposited by RF magnetron sputtering
  109. Adhesive B-doped DLC films on biomedical alloys used for bone fixation
  110. Effective manipulation of the microstructure of zeolite film by hydrothermal pretreatment
  111. Uniformity of filament strength within a flax fiber batch
  112. Optimization of the Parameters of Friction Stir Welding for AZ91D Magnesium Alloy Using the Taguchi Design
  113. Influence of electrode position in the electrolytic cell configuration for the electrodeposition of Cu(In,Ga)Se 2 thin films
  114. Novel composites of Zn 1−x Cd x O (x = 0, 0.05, 0.1) thick films for optoelectronic device application
  115. Synthesis and enhanced photocatalytic activity of Zr-doped N-TiO 2 nanostructures
  116. Microstructural evolution of a TC11 titanium alloy during linear friction welding
  117. First-principles study of Si and Mg segregation in grain boundaries in Al and Cu: application of local-energy decomposition
  118. Hierarchical description of deformation in block copolymer TPEs
  119. Preparation and characterization of CeO 2 decorated TiO 2 nanotube arrays photoelectrode and its enhanced photoelectrocatalytic efficiency for degradation of methyl orange
  120. Adhesion characteristics of Cu/Ni–Cr/polyimide flexible copper clad laminates according to Ni:Cr ratio and Cu electroplating layer thickness
  121. FCC to HCP transformation kinetics in a Co–27Cr–5Mo–0.23C alloy
  122. Synthesis of PbSe nanostructures with different size and morphology and their electrochemical properties
  123. Direct synthesis and hydrogen storage behaviors of nanocrystalline Na 2 LiAlH 6
  124. Effect of friction stir processing on mechanical and microstructural properties of AM60B Magnesium alloy
  125. A facile route to synthesis of AgInS 2 nanostructures
  126. Microstructures and properties of Sn58Bi, Sn35Bi0.3Ag, Sn35Bi1.0Ag solder and solder joints
  127. Influence of Ti doping on the superconducting properties of YBa 2 (Cu 3−x Ti x )O 7−δ materials
  128. Ferroelectric properties and the origin of the magnetism in the Bi 6 Fe 2 Ti 3 O 18 thin films
  129. Structure and charge density of Ce doped gadolinium gallium garnet (GGG)
  130. A novel poling technique to obtain excellent piezoelectric properties of Pb(Mg 1/3 Nb 2/3 )O 3 –0.32PbTiO 3 single crystals
  131. Defect-assisted tuning of electroluminescence from p-GaN/n-ZnO nanorod heterojunction
  132. The preparation, cytocompatibility, and in vitro biodegradation study of pure β-TCP on magnesium
  133. Properties of pulse electrodeposited copper gallium sulphide films
  134. Effects of Al 2 O 3 particle reinforcement on the lubricated sliding wear behavior of ZA-27 alloy composites
  135. PEG-assisted hydrothermal synthesis and luminescent properties of ZnWO 4 :Sm 3+ white light-emitting phosphors
  136. Structural characterization of electrodeposited boron
  137. Toxicity assessment of engineered Mn–ZnS quantum dots in vitro
  138. Cobalt substituted ZnO thin films: a potential candidate for spintronics
  139. Indium rich InGaN solar cells grown by MOCVD
  140. Novel thieno[3,4-c]pyrrole-4,6-dione-based conjugated copolymers with donor–acceptor structures
  141. Raman scattering characterization of Ge-composition in bulk Si 1− x Ge x with compositional variation
  142. Influence of the annealing temperature on violet emission of ZnO films obtained by oxidation of Zn film on quartz glass
  143. SiC nanofibers by pyrolysis of electrospun preceramic polymers
  144. Flammability and tensile properties of polylactide nanocomposites with short carbon fibers
  145. Control of porous structure in flexible silicone aerogels produced from methyltrimethoxysilane (MTMS): the effect of precursor concentration in sol–gel solutions
  146. Pharmaceutical microparticle engineering with electrospraying: the role of mixed solvent systems in particle formation and characteristics
  147. Preparation and characterization of biphasic calcium phosphate ceramics of desired composition
  148. Electronic and optical properties of (Al x Ga 1− x ) 1− y Mn y As single crystal: a new candidate for integrated optical isolators and spintronics
  149. Surface and bulk exciton recombination dynamics in GaN freestanding films via one- and two-photon excitations
  150. Single source precursor for vacuum evaporation of MoBi 2 Se 5 photoactive thin films
  151. Dielectric and thermal properties of CCTO/epoxy composites for embedded capacitor applications: mixing and fabrication methods
  152. Preparation and characterization of Fe-V/TiO 2 -SiO 2 nanocatalyst modified by zinc
  153. Safety and efficacy of a novel abluminal groove-filled biodegradable polymer sirolimus-eluting stent
  154. A controlled solvethermal approach to synthesize nanocrystalline iron oxide for congo red adsorptive removal from aqueous solutions
  155. Study of effect of chromium on titanium dioxide phase transformation
  156. Influence of Tm 2 O 3 doping on structural and electrical properties of ZnO
  157. Oxidation resistance of hafnium diboride—silicon carbide from 1400 to 2000 °C
  158. Magneto-structural properties of Ni–Zn nanoferrites synthesized by the low-temperature auto-combustion method
  159. Preparation of barium titanate nanocube particles by solvothermal method and their characterization
  160. High magnetic field controlled interdiffusion behavior at Bi-Bi 0.4 Sb 0.6 liquid/solid interface
  161. Highly efficient dye sensitized solar cells based on a novel ruthenium sensitizer
  162. Artifact level produced by different femoral head prostheses in CT imaging: diamond coated silicon nitride as total hip replacement material
  163. Photoluminescence and electrical properties of Eu 3+ -doped Na 0.5 Bi 4.5 Ti 4 O 15 -based ferroelectrics under blue light excitation
  164. Viscoelastic properties of filled polyethylene glycol in the megahertz frequency band
  165. Influence of mineral phase in mineralization of a biocomposite containing chitosan, demineralized bone matrix and bone ash— in vitro study
  166. Lamellar orientation in the blends of linear low density polyethylene and isotactic polypropylene induced by dynamic packing injection molding
  167. Antimicrobial coatings — obtaining and characterization
  168. Profile of the wafer level ECD gold bumps under variable parameters
  169. Densification of (Na,K)NbO 3 piezoelectric ceramics by two-step mixing process
  170. Theoretical ELNES spectra of Si-K, Si-L, N-K, and O-K edges of an intergranular glassy film model in β-Si 3 N 4
  171. Micromechanical modelling of poly(ethylene terephthalate) using a layered two-phase approach
  172. Functional Properties of Fe−Mo and Fe−Mo−W Galvanic Alloys
  173. Role of annealing temperature on microstructural and electro-optical properties of ITO films produced by sputtering
  174. Microstructural evolution of bulk nanocrystalline Ni during creep
  175. Electrical, electrochemical and photo-electrochemical studies on the electrodeposited n-type semiconductor hexagonal crystalline CdS thin film on nickel substrate
  176. The enhanced interface effect induced by thermal pressure in Nd 0.7 Sr 0.3 MnO y ceramics
  177. Fabrication of mesoporous silica/carbon black nanospheres and load-sensitive conducting rubber nanocomposites
  178. A study on the synthesis of nanostructured WC–10 wt% Co particles from WO 3 , Co 3 O 4 , and graphite
  179. Electrical properties and stability of Dy 2 O 3 -doped ZnO–Pr 6 O 11 -based varistors
  180. Reduction–adsorption behavior of platinum ions on activated carbon fibers
  181. Statistical quantification of the microstructural homogeneity of size and orientation distributions
  182. Evolution of the electronic structure and properties of neutral and charged arsenic clusters
  183. Synthesis of monodisperse poly(styrene- co -divinylbenzene) microspheres with binary porous structures and application in high-performance liquid chromatography
  184. Nonstoichiometry in line compounds
  185. Copper diffusion in germanium: connecting point defect parameters with bulk properties
  186. Production of single and multi-walled carbon nanotubes using natural gas as a precursor compound
  187. Preparation and properties of BaTiO 3 filled butyl rubber composites for flexible electronic circuit applications
  188. Electrical conductivity enhancement of a polymer using butyl glycidyl ether (BGE)–lithium hexafluorophosphate (LiPF 6 ) complex
  189. Mechanical properties and microstructure of Al 2 O 3 /mullite composite
  190. Ca 4 La 2 Ti 5 O 17 : a novel low loss dielectric ceramics in the CaO–La 2 O 3 –TiO 2 system
  191. Carbon nanotube-based coatings on titanium
  192. Comment on “preparation and electrorheology of new mesoporous polypyrrole/MCM-41 suspensions”
  193. Electrical properties of Y-modified Pb(SnTi)O 3 ferroelectric ceramics
  194. Temperature effects on the fatigue of highly filled PMMA
  195. Synthesis and characterization of Ba 0.7 Sr 0.3 TiO 3 , BaZr 0.3 Ti 0.7 O 3 thin film heterostructures
  196. Effects of reduction time on the structural, electrical and thermal properties of synthesized reduced graphene oxide nanosheets
  197. Solid-state method for incorporation of lead sulfide nanoplates in poly(3,4-ethylenedioxythiophene) matrix as NIR materials
  198. Plasma-based processes and thin film equipment for nano-scale device fabrication
  199. Peptide immobilization on polyethylene terephthalate surfaces to study specific endothelial cell adhesion, spreading and migration
  200. A rapid method for investigating the absorption of formaldehyde from air by wool
  201. Effects of reduction time on the structural, electrical and thermal properties of synthesized reduced graphene oxide nanosheets
  202. Solid-state method for incorporation of lead sulfide nanoplates in poly(3,4-ethylenedioxythiophene) matrix as NIR materials
  203. Soft lithography meets self-organization: Some new developments in meso-patterning
  204. Oxidation behavior of the TiNi shape memory alloy with a laser surface melted layer
  205. Emitter passivation of silicon solar cell via organic coating at room temperature
  206. Insights into the power law relationships that describe mass deposition rates during electrospinning
  207. Synthesis, characterization and growth mechanism of ZnO nanowires on NiCl 2 -coated Si substrates
  208. Annealing behavior of TiO 2 -sheathed Ga 2 O 3 nanowires
  209. Failure behaviors of BGA solder joints under various loading conditions of high-speed shear test
  210. In vitro and in vivo evaluation of the effects of demineralized bone matrix or calcium sulfate addition to polycaprolactone–bioglass composites
  211. Nucleation and growth mechanism of apatite on a bioactive and degradable ceramic/polymer composite with a thick polymer layer
  212. Thermal stability and oxidation behavior of Al-containing nanocrystalline powders produced by cryomilling
  213. Mechanical properties and water uptake of epoxy–clay nanocomposites containing different clay loadings
  214. Effect of the interface bonding on the mechanical response of aluminium foam reinforced steel tubes
  215. Photocatalytic decomposition of methylene blue via Fenton mechanisms by silicon wafer doped with Au and Cu: a theoretical and experimental study
  216. Effects of glass additions on the dielectric properties and energy storage performance of Pb 0.97 La 0.02 (Zr 0.56 Sn 0.35 Ti 0.09 )O 3 antiferroelectric ceramics
  217. Structure and temperature-stability of piezoelectric properties of K 0.5 Na 0.5 NbO 3 –LiSbO 3 –Al(Fe 0.9 Mn 0.1 )O 3 lead-free ceramics
  218. High speed and low power consumption of superlattice-like Ge/Sb 70 Se 30 thin films for phase change memory application
  219. UPRM-5 titanium silicates prepared using tetrapropylammonium and tetrabutylammonium cations: framework stability, textural properties, and carbon dioxide adsorption
  220. Giant dielectric and electrical properties of sodium yttrium copper titanate: Na 1/2 Y 1/2 Cu 3 Ti 4 O 12
  221. Osteoblast attachment to hydroxyapatite micro-tube scaffolds
  222. Microstructure, optical and photoelectron-chemical properties of TiO 2 microspheres prepared by hydrothermal method
  223. Morphological and optical properties of n-type porous silicon: effect of etching current density
  224. In situ synthesis of high-density contact-free Ag-nanoparticles for plasmon resonance polystyrene nanocomposites
  225. Comparing photocatalytic activities of commercially available iron-doped and iron-undoped aeroxide TiO 2 P25 powders
  226. Gold-functionalized graphene as conductive filler in UV-curable epoxy resin
  227. Optical and magnetic investigation of Co-doped-TiO 2 : various morphologies of titanium dioxide nanostructures
  228. Microstructure and thermal expansion behavior of spray-formed Al–27Si alloy used for electronic packaging
  229. A thermodynamic approach towards glass-forming ability of amorphous metallic alloys
  230. The synthesis of large area graphene/carbon nanotubes as additive material and their enhanced specific capacitance
  231. Hydrolysis of monetite/chitosan composites in α-MEM and SBF solutions
  232. Effect of deposition temperature on structural, microstructural and magnetic properties of CoFe 2 O 4 thin films deposited by pulsed laser deposition
  233. Effect of humidity treatment on the structure and photocatalytic properties of titania mesoporous powder
  234. Complete photocatalytic mineralization of Nile blue on hetero-structured CoTiO 3 nano-composite coated on glass in a sol–gel process using diethylene glycol as stabilizer: effect of charge separation and calcination temperature on activity
  235. Nanocrystalline copper selenide thin films by chemical spray pyrolysis
  236. Synthesis and characterization of NiMoO 4 via ultrasonic route by a novel precursor
  237. Role of iron oxide impurities in electrocatalysis by multiwall carbon nanotubes: An investigation using a novel magnetically modified ITO electrodes
  238. Correlation between changes in Curie temperature and electrical resistivity during structural relaxation in Fe 27 Ni 53 P 14 B 6 metallic glass
  239. Effects of AlN buffer on the physical properties of GaN films grown on 6H-SiC substrates
  240. Glass structure of the CaO–B 2 O 3 –SiO 2 –Al 2 O 3 –ZnO glasses system with different Si content
  241. Apatite-forming PEEK with TiO 2 surface layer coating
  242. Effects of substrate temperatures on the thermal stability of Al-doped ZnO thin films grown by DC magnetron sputtering
  243. Synthesis, characterization, and microwave dielectric properties of monoclinal structure ZnZrNb 2 O 8 ceramics through the aqueous sol–gel process
  244. Thermal stability and mechanical properties of nanocrystalline Fe–Ni–Zr alloys prepared by mechanical alloying
  245. Preparation and properties of coke powder activated carbon/α-Co(OH) 2 composite electrode materials
  246. Experimental and numerical analysis of hot tearing susceptibility for Mg–Y alloys
  247. Improved the electrochemical property of multiwall carbon nanotubes by mesophase pitch fluoride coating
  248. Structural, optical and magnetic properties of Cr doped In 2 O 3 powders and thin films
  249. Surface silver-doping of biocompatible glass to induce antibacterial properties. Part I: massive glass
  250. Optical properties of nanocrystalline silicon deposited by PECVD
  251. Effect of sepiolite on nonisothermal crystallization kinetics of polypropylene
  252. Phase orientation, interface structure, and properties of aged Cu-6 wt.% Ag
  253. Subcritical crack growth in SiAlON ceramics from a modified static lifetime test including multiple use of survivals
  254. Luminescent properties of sol–gel processed red-emitting phosphor Eu 3+ , Bi 3+ co-doped (Ca,Sr)(Mo,W)O 4
  255. Methodical specific features of tribocorrosion investigations
  256. Large-scale electrochemical synthesis of SnO 2 nanoparticles
  257. AC impedance and dielectric spectroscopic studies of Mg 2 +  ion conducting PVA–PEG blended polymer electrolytes
  258. Temperature dependence of electromechanical properties of PLZT x /57/43 ceramics
  259. Stress measurement using area detectors: a theoretical and experimental comparison of different methods in ferritic steel using a portable X-ray apparatus
  260. Effects of B 2 O 3 additive on sintering behavior and microwave dielectric properties of LaAlO 3 -doped MgTiO 3 –CaTiO 3 ceramics
  261. Concentration-driven structural stability and dielectric dispersion in lead free (Ba 1−x Sc 2x/3 )Zr 0.3 Ti 0.7 O 3 ceramics
  262. Design of Cu–Ce co-doped TiO 2 for improved photocatalysis
  263. Reverse transformation of deformation-induced martensite in austenitic stainless steel studied by positron annihilation
  264. Tunable electronic structures and magnetism in arsenene nanosheets via transition metal doping
  265. Stabilization of horseradish peroxidase in silk materials
  266. Synthesis and characterization of sol–gel derived (Ba,Ca)(Ti,Zr)O 3 nanoparticles
  267. Investigations of doping induced structural, optical and magnetic properties of Ni doped ZnS diluted magnetic semiconductors
  268. N -chloramide modified Nomex ® as a regenerable self-decontaminating material for protection against chemical warfare agents
  269. Strain induced structural phase transition in NaNbO 3 doped BiFeO 3
  270. Microstructure and mechanical properties of brazed titanium/steel joints
  271. Microstructure of 08KH18N10T Austenitic Steel Mechanically Alloyed with Nanooxides of the Y 2 O 3 – ZrO 2 System
  272. Strain induced structural phase transition in NaNbO 3 doped BiFeO 3
  273. Switching in structural, optical, and magnetic properties of self-assembled Co-doped ZnO: effect of Co-concentration
  274. Effect of shot peening on surface mechanical properties of TiB 2 /Al composite
  275. Optical properties of Ag doped ZnO nanocrystals prepared by hydrothermal and photodeposition method
  276. New type of low-dielectric composites based on o -cresol novolac epoxy resin and mesoporous silicas: fabrication and performances
  277. Isothermal crystallization kinetics and morphology of biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate)
  278. Enhanced photocatalytic activity of BiFeO 3 particles by surface decoration with Ag nanoparticles
  279. Long-term in vivo experimental investigations on magnesium doped hydroxyapatite bone substitutes
  280. An estimation of the reflectivity of gold- and platinum-group metals alloyed with copper
  281. The influence of deformation by equal-channel angular pressing on the ageing response and precipitate fracturing: case of the Al–Ag alloy
  282. Comparison study of silicon carbide coatings produced at different deposition conditions with use of high temperature nanoindentation
  283. Core–shell-structured cross-linked poly(glycidyl methacrylate)-coated carbonyl iron microspheres and their magnetorheology
  284. Influence of filament-to-substrate distance on the spectroscopic, structural and optical properties of silicon carbide thin films deposited by HWCVD technique
  285. Structural, optical and ferroelectric behavior of pure BiFeO 3 thin films synthesized by the sol–gel method
  286. Effect of coordination on bond properties: A first principles study
  287. Improved mechanical properties of carbon nanotubes-coated flax fiber reinforced composites
  288. A TEM study of the combined effect of severe plastic deformation and (Zr), (Sc+Zr)-containing dispersoids on an Al–Mg–Si alloy
  289. Comparison of two polymeric carrier formulations for controlled release of hydrophilic and hydrophobic drugs
  290. Sorption and diffusion of arenes through poly (ethylene-co-vinyl acetate) membranes
  291. Influence of nitrogen gas flow rate on the structural, morphological and electrical properties of sputtered TiN films
  292. Investigation of ammonium diuranate calcination with high-temperature X-ray diffraction
  293. Synthesis and characterization of iron and iron nitride microtubes obtained from biogenic iron oxide
  294. Chemical modification and wetting of medium density fibreboard produced from heat-treated fibres
  295. Contribution to quantification of highly inhomogeneous microstructures
  296. h -MoO 3 microrods grown on wood substrates through a low-temperature hydrothermal route and their optical properties
  297. Nano-tribological characteristics of TiO 2 films on 3-mercaptopropyl trimethoxysilane sulfonated self-assembled monolayer
  298. Influence of ultrasonic melt treatment on the formation of primary intermetallics and related grain refinement in aluminum alloys
  299. Electrospun antimicrobial microfibrous scaffold for annulus fibrosus tissue engineering
  300. Diagnostic Parameter of Wear of a Piston–Bush–Cylinder System
  301. Discrepancy of room temperature ferromagnetism in Mo-doped In 2 O 3
  302. Apparently complete grain boundary wetting in Cu–In alloys
  303. Effect of Ho 3+ substitution on magnetic and microwave absorption properties of Sr(ZnZr) 0.5 Fe 12 O 19 hexagonal ferrite nanoparticles
  304. Effect of nanoclay addition on the displacement-controlled flexural fatigue behavior of a polymer
  305. The electromagnetic properties of dilute magnetic GeSi:Mn quantum rings
  306. Improving the performance of ternary bulk heterojunction polymer cell by regioregular poly (3-hexylthiophene)-grafted oxide graphene on in situ doping of CdS
  307. Topographically induced self-deformation of the nuclei of cells: dependence on cell type and proposed mechanisms
  308. Monitoring cellular behaviour using Raman spectroscopy for tissue engineering and regenerative medicine applications
  309. Bacterial cellulose whisker as a reinforcing filler for carboxylated acrylonitrile-butadiene rubber
  310. Investigating the influence of ZnO nanowires on the interfacial micro-mechanical behavior of carbon fiber/epoxy microdroplet structures using micro-Raman spectroscopy
  311. Application of Ni and Cu nanoparticles in transient liquid phase (TLP) bonding of Ti-6Al-4V and Mg-AZ31 alloys
  312. Enhanced energy storage density performance in (Pb 0.97 La 0.02 )(Zr 0.5 Sn 0.44 Ti 0.06 )–BiYO 3 anti-ferroelectric composite ceramics
  313. Preparation and conductive mechanism of copper nanoparticles ink
  314. Directional solidification and characterization of InBi 1−x Sb x crystals
  315. Si 3 N 4 /Mg composites with an interpenetrating network
  316. High-boiling-point solvent synthesis of mesoporous NiCo 2 S 4 with high specific surface area as supercapacitor electrode material
  317. Influence of ion-beam sputtering deposition parameters on highly photosensitive and transparent CdZnO thin films
  318. Varistor and giant permittivity properties of SnO 2 –Zn 2 SnO 4 ceramic matrix composites
  319. Defect based violet–blue emission of Mg doped ZnO annealed at different temperatures
  320. The influence of copper addition on microstructure and mechanical properties of thermomechanically processed microalloyed steels
  321. Wettability and transient liquid phase bonding of hafnium diboride composite with Ni–Nb alloys
  322. Prolonging the combustion duration of wood by TiO 2 coating synthesized using cosolvent-controlled hydrothermal method
  323. Effects of microstructure on optimum heat treatment conditions in metal-matrix composites
  324. Different electric-field dependences of geminate and nongeminate recombination in photoluminescence of a-Si:H
  325. Micron-scale indentation of amorphous and drawn PET surfaces
  326. Upconversion luminescent materials of Y–Gd oxysulfide binary system codoped with Yb and Er
  327. Role of boron addition on the consolidation and properties of steel composites prepared by SPS
  328. Influence of Hydrogen and Carbon on the Atomic Ordering and Ultimate Strength of N36 Alloy
  329. Dielectric behaviour of glycidyl methacrylatebutyl methacrylate copolymers
  330. Room-temperature multiferroic properties and magnetoelectric coupling in Bi 4− x Sm x Ti 3− x Co x O 12− δ ceramics
  331. Gel–sol synthesis and aging effect on highly crystalline anatase nanopowder
  332. Structural investigations of V 2 O 5 –P 2 O 5 –CaO glass system by FT-IR and EPR spectroscopies
  333. Effect of graphene dispersion on the equilibrium structure and deformation of graphene/eicosane composites as surrogates for graphene/polyethylene composites: a molecular dynamics simulation
  334. Glycolic acid-functionalized chitosan–Co 3 O 4 –Fe 3 O 4 hybrid magnetic nanoparticles-based nanohybrid scaffolds for drug-delivery and tissue engineering
  335. Cellulose film regenerated from Styela clava tunics have biodegradability, toxicity and biocompatibility in the skin of SD rats
  336. Plastic deformation mechanism of crystalline polymer materials during the rolling process
  337. Microwave dielectric properties of low-fired CoNb 2 O 6 ceramics with B 2 O 3 addition
  338. Comparison of in vivo biocompatibilities between parylene-C and polydimethylsiloxane for implantable microelectronic devices
  339. Facile synthesis of ordered mesoporous silica with high γ-Fe 2 O 3 loading via sol-gel process
  340. Newly developed biodegradable polymer nanocomposites of cellulose acetate and Al 2 O 3 nanoparticles with enhanced dielectric performance for embedded passive applications
  341. Specific heat of the Ba 0.7 Sr 0.3 Ti 1− y Zr y O ( y = 0, 0.03, 0.05, 0.1) ferroelectric ceramics obtained by the temperature relaxation method
  342. Facile synthesis of high performance non-noble-metal electrocatalyst Fe–N–S/C for oxygen reduction reaction in acidic solutions
  343. Preparation and characterization of water soluble and conducting poly(sodium 4-styrenesulfonate) doped poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotubes core–shell nanocomposites by in situ polymerization
  344. A strategy for improving mechanical properties of composite nanofibers through surface functionalization of fillers with hyperbranched polyglycerol
  345. Evaluation of heat release in the process of pulsed mechanical hardening of titanium alloys
  346. Internal melting and coarsening of liquid droplets in an Al–Cu alloy: a 4-D experimental study
  347. Effect of water on the fatigue behaviour of a pa66/glass fibers composite material
  348. Improved magnetism in Cr doped ZnS nanoparticles with nitrogen co-doping synthesized using chemical co-precipitation technique
  349. Cobalt oxide nanoparticle-modified carbon nanotubes as an electrocatalysts for electrocatalytic evolution of oxygen gas
  350. Adsorption kinetics, isotherm, and thermodynamics of Hg 2+ to polyaniline/hexagonal mesoporous silica nanocomposite in water/wastewater
  351. Wood—a 45th anniversary review of JMS papers. Part 1: The wood cell wall and mechanical properties
  352. Preparation, in vitro and in vivo evaluation of mPEG-PLGA nanoparticles co-loaded with syringopicroside and hydroxytyrosol
  353. Phase selection of titanium boride in copper matrix composites during solidification
  354. Impact factors, citation distributions and journal stratification
  355. Effects of crosslinking ratio, model drugs, and electric field strength on electrically controlled release for alginate-based hydrogel
  356. Synthesis and lithium storage properties of interconnected fullerene-like carbon nanofibers encapsulated with tin nanoparticles
  357. Structure and crystallization behavior of borate-based bioactive glass
  358. Study of the Mechanism of Action of the Isopropanol Extract of Rapeseed Oil Cake on the Atmospheric Corrosion of Copper
  359. Influence of organic salt concentration on the performance of bulk heterojunction organic solar cell
  360. Synthesis of superparamagnetic cobalt nanoparticles through solvothermal process
  361. Formation mechanism of NaNbO 3 powders during hydrothermal synthesis
  362. Development of n-type microcrystalline SiO x :H films and its application by innovative way to improve the performance of single junction µc-Si:H solar cell
  363. Development of a Sn–Ag–Cu solder reinforced with Ni-coated carbon nanotubes
  364. Oxygen incorporation in Ti 2 AlC thin films studied by electron energy loss spectroscopy and ab initio calculations
  365. Mechanical and tribological behavior of clay–polypropylene nanocomposites
  366. Development of multiferroic polymer nanocomposite from PVDF and (Bi 0.5 Ba 0.25 Sr 0.25 )(Fe 0.5 Ti 0.5 )O 3
  367. Effect of nickel content on the anodic dissolution and passivation of zinc–nickel alloys in alkaline solutions by potentiodynamic and potentiostatic techniques
  368. Low-temperature thermoelectric characteristics of Ca 3−x Yb x Co 3.95 Ga 0.05 O 9+δ (0 ≤ x ≤ 0.10)
  369. Ibuprofen loaded porous calcium phosphate nanospheres for skeletal drug delivery system
  370. Rolling and recrystallisation textures in Cu–Al, Cu–Mn and Cu–Ni alloys
  371. Dissolutive wetting of Si by molten Cu
  372. Room temperature elastic moduli and Vickers hardness of hot-pressed LLZO cubic garnet
  373. Effect of the substrate temperature on the structural, optical and electrical properties of spray-deposited CdS:B films
  374. New insights into the crystallization of cordierite from a stoichiometric glass by in situ high-temperature SEM
  375. Micro-porous silicon structure with low optical reflection
  376. Photocatalytic degradation of methylene blue by C 3 N 4 /ZnO: the effect of the melamine/ZnO ratios
  377. Fast response time alcohol gas sensor using nanocrystalline F-doped SnO 2 films derived via sol–gel method
  378. PEDOT:PSS/graphene/PEDOT ternary film for high performance electrochemical electrode
  379. Microstructure, electrical and magnetic properties of polycrystalline La 0.85 K 0.15 MnO 3 manganites prepared by different synthesis routes
  380. BiB 3 O 6 :Pr 3+ partially crystallized glasses for second harmonic generation
  381. Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs)
  382. An effective three-dimensional surface-enhanced Raman scattering substrate based on oblique Si nanowire arrays decorated with Ag nanoparticles
  383. High-frequency response in Sr 1−x Ca x TiO 3 powders studied by terahertz time-domain spectroscopy
  384. Structural and composition analysis of Apex™ and Foturan™ photodefinable glasses
  385. Influencing biophysical properties of fibrin with buffer solutions
  386. A new method of depositing high figure-of-merit porous PZT pyroelectric thick film using [001]-oriented PZT nanorod by electrophoresis deposition
  387. Mechanisms of stress-corrosion cracking and liquid-metal embrittlement in Al-Zn-Mg bicrystals
  388. Self-dissolving micropile array tips for percutaneous administration of insulin
  389. Investigation of Er-doped Sc 2 O 3 transparent ceramics by positron annihilation spectroscopy
  390. Electrochemical investigation of silicon/carbon composite as anode material for lithium ion batteries
  391. Low temperature sintering and properties of lead-free (Ba 0.85 Ca 0.15 )(Zr 0.1 Ti 0.9 )O 3 ceramics with Ba(Cu 0.5 W 0.5 )O 3 addition
  392. Theoretical and experimental determination of residual stresses in plane joints
  393. Electrical characteristics of Au/n-Si (MS) Schottky Diodes (SDs) with and without different rates (graphene + Ca 1.9 Pr 0.1 Co 4 O x -doped poly(vinyl alcohol)) interfacial layer
  394. Composition control of co-electroplating Au–Sn deposits using experimental strategies
  395. On the triggering mechanism for the metal–insulator transition in thin film VO 2 devices: electric field versus thermal effects
  396. Influence of thermal treatment on the nonlinear current–voltage behavior and restoration hysteresis effect of CaCu 3 Ti 4 O 12 thin films
  397. Dental casting alloys behaviour during power toothbrushing with toothpastes with various abrasivities. Part I: wear behavior
  398. Atomic layer deposition of hafnium oxide dielectrics on silicon and germanium substrates
  399. Size dependence of the contact angle of liquid clusters of Bi and Sn supported on SiO 2 , Al 2 O 3 , graphite, diamond and AlN
  400. Controlled fabrication of noble metal nanoparticles loaded on the surfaces of cyclotriphosphazene-containing polymer nanotubes
  401. Fabrication, chemical composition change and phase evolution of biomorphic hydroxyapatite
  402. Preparation and performance of organic–inorganic halide perovskites
  403. Fabrication of an aluminum–carbon nanotube metal matrix composite by accumulative roll-bonding
  404. Mechanical properties of chromium–chromium sulfide cermets fabricated by self-propagating high-temperature synthesis
  405. Application of power loss calculation to estimate the specific contact resistance of the screen-printed silver ohmic contacts of the large area silicon solar cells
  406. Chain flexibility versus molecular entanglement response to rubbing deformation in designing poly(oxadiazole-naphthylimide)s as liquid crystal orientation layers
  407. Improvement of photopolymer materials for holographic data storage
  408. Fabrication and characterization of Li 0.5 Fe 2.5 O 4 octahedrons via a TEA-assisted route
  409. Monoclinic effects and orthotropic estimation for the behaviour of rolled sheet
  410. Prediction of no-recrystallization temperature by simulation of multi-pass flow stress curves from single-pass curves
  411. Microstructural and electrical properties of PbTIO 3 screen-printed thick films
  412. Enhanced photocatalytic activity of Mg 0.05 Zn 0.95 O thin films prepared by sol–gel method through a cycle
  413. Comparison of galvanic displacement and electroless methods for deposition of gold nanoparticles on synthetic calcite
  414. Using deformation mechanism maps to depict flow processes in superplastic ultrafine-grained materials
  415. Investigation of the Deformation and Fracture of Composites with the Help of Electronic Speckle Interferometry
  416. Principles of grain refinement in magnesium alloys processed by equal-channel angular pressing
  417. A review of carbon dots in biological applications
  418. Methotrexate-grafted-oligochitosan micelles as drug carriers: synthesis and biological evaluations
  419. Synthesis and temperature dependent photoluminescence of Zn 1− x Mg x O films grown by ultrasonic spray pyrolysis
  420. Influence of dopants on the thermal properties and critical behavior of the ferroelectric transition in uniaxial ferroelectric Sn 2 P 2 S 6
  421. Influence of light polymerization modes on degree of conversion and crosslink density of dental composites
  422. Biphasic calcium phosphate–casein bone graft fortified with Cassia occidentalis for bone tissue engineering and regeneration
  423. Estimation of the serviceability of oil and gas pipelines after long-term operation according to the parameters of their defectiveness
  424. Effect of CaF 2 on the sintering and thermal expansion of La 0.85 Sr 0.15 Cr 0.95 O 3
  425. Effect of modified MWCNT on the properties of PPO/LCP blend
  426. Effect of stacking type in precursors on composition, morphology and electrical properties of the CIGS films
  427. Equilibrium and non-equilibrium charge-dependent quantification of endothelial cell hydrogel scaffolds
  428. New insight into PEO modified inner surface of HNTs and its nano-confinement within nanotube
  429. Microstructure and wear properties of LENS ® deposited medical grade CoCrMo
  430. Reaction synthesis of in situ vanadium carbide particulates-reinforced iron matrix composites by spark plasma sintering
  431. Effects of Cr 2 O 3 doping on the microstructural and electrical properties of ZnO–Bi 2 O 3 based varistor films
  432. Diffraction-line shifts and broadenings in continuously and discontinuously coarsening precipitate-matrix systems: coarsening of initially coherent nitride precipitates in a ferrite matrix
  433. Conversion of waste animal bones into porous hydroxyapatite by alkaline treatment: effect of the impregnation ratio and investigation of the activation mechanism
  434. Nanomechanical properties of the stigma of dragonfly Anax parthenope julius Brauer
  435. Three-dimensional NiCo 2 S 4 nanosheets as high-performance electrodes materials for supercapacitors
  436. Optical characterisation of silicon nitride thin films grown by novel remote plasma sputter deposition
  437. Structural and frequency dependencies of a.c. and dielectric characterizations of epitaxial InSb-based heterojunctions
  438. In situ synthesis of CuS nanoparticle with a distinguishable SPR peak in NIR region
  439. First-principle calculations of the structural, electronic, thermodynamic and thermal properties of ZnS x Se 1− x ternary alloys
  440. First principles investigation of the structure and stability of LiNiO 2 doped with Co and Mn
  441. Preparation and characteristic of magnetic LDPE/Fe 3 O 4 nano-composite films
  442. BaTiO 3 (BTO)–CaCu 3 Ti 4 O 12 (CCTO) substrates for microwave devices and antennas
  443. Comparative study of electrical and mechanical properties of fire-refined and electrolytically refined cold-drawn copper wires
  444. Sol-gel synthesis and characterization of the photocatalyst BaCo 1/3 Nb 2/3 O 3
  445. On the use of non-MPB lead zirconium titanate (PZT) granules for piezoelectric ceramic–polymer sensorial composites
  446. The effect of photo-oxidation on thermal and fire retardancy of polypropylene nanocomposites
  447. Comparison of tensile and knot security properties of surgical sutures
  448. Precipitation behavior of Heusler phase (Ni 2 AlHf) in multiphase NiAl alloy
  449. Enhanced wear and fatigue properties of Ti–6Al–4V alloy modified by plasma carburizing/CrN coating
  450. Effect of particle surface treatment and blending method on flexural properties of injection-molded cenosphere/HDPE syntactic foams
  451. Al x (Sn 2 Se 3 ) 1−x phase change films for high-temperature data retention and fast transition speed application
  452. AFM analysis of the surface of nanoporous membranes: application to the nanofiltration of potassium clavulanate
  453. Comparison of structural, optical, photocatalytic behavior and hydrophilic properties of pure and Sn/La co-doped TiO 2 thin films
  454. Fabrication and finite element modeling of ellipsoidal macro-shells
  455. PMMA nanocomposites and gradient materials prepared by means of polysilsesquioxane (POSS) self-assembly
  456. Dielectric properties of organosilicons from first principles
  457. Effect of replacement of MgO by CaO on sintering, crystallization and properties of MgO–Al 2 O 3 –SiO 2 system glass-ceramics
  458. Supercritical CO 2 processing of polymers for the production of materials with applications in tissue engineering and drug delivery
  459. Mesoporous silica nanoparticle-functionalized poly(methyl methacrylate)-based bone cement for effective antibiotics delivery
  460. Synthesis and characterization of thin films of palladium (II) phthalocyanine and its derivatives using the thermal evaporation technique
  461. Growth and characterization of well-aligned rutile TiO 2 nanocrystals on sapphire substrates via metal organic vapour deposition
  462. Quantitative proteomics reveals altered expression of extracellular matrix related proteins of human primary dermal fibroblasts in response to sulfated hyaluronan and collagen applied as artificial extracellular matrix
  463. On stability of NiTi wire during thermo-mechanical cycling
  464. Anatase TiO 2 nanoparticles/carbon nanotubes nanofibers: preparation, characterization and photocatalytic properties
  465. Influence of interstitial impurities on the valence electron structures and phase transformation behavior in intermediate Ti–Al alloys
  466. Investigation of the lithium-rich boundary of the Li 1+ x Mn 2− x O 4 cubic spinel phase in air
  467. Strength of functionally designed cellular cemented carbides produced by coextrusion
  468. Fabrication of bioactive hydroxyapatite/bis-GMA based composite via three dimensional printing
  469. Fabrication of Y 2 O 2 S:Eu 3+ hollow nanofibers by sulfurization of Y 2 O 3 :Eu 3+ hollow nanofibers
  470. Organic solvent based TiO 2 dispersion paste for dye-sensitized solar cells prepared by industrial production level procedure
  471. Rietveld analysis, magnetic, vibrational and impedance properties of (Bi 1−x Pr x )(Fe 1−x Zr x )O 3 ceramics
  472. Microstructure and microwave dielectric properties of Ba 4.2 Nd 9.2 Ti 18−x Sn x O 54 (x = 0, 0.25, 0.5, 1, 1.5, 2) ceramics
  473. Influence of cross-linking density on swelling and estradiol permeation of chitosan membranes
  474. Biomechanical characterisation of a degradable magnesium-based (MgCa0.8) screw
  475. The effect of substrate temperature on the microstructure and tunnelling magnetoresistance of FeCo–Al 2 O 3 nanogranular films
  476. Temperature-induced control over phase selection among hydroxides of nickel
  477. Facility, procedure, and results of investigations of the hydrogen elastic deformation of a palladium plate
  478. Low-temperature solid-state synthesis and phase-controlling studies of CdS nanoparticles
  479. Effect of buffer thickness on the properties of Al-doped ZnO thin films prepared by DC magnetron sputtering
  480. Cr(VI) removal from aqueous solution using chemically reduced and functionalized graphene oxide
  481. Yttrium deposition on mesoporous TiO 2 : textural design and UV decolourization of organic dyes
  482. Investigation of the lithium-rich boundary of the Li 1+ x Mn 2− x O 4 cubic spinel phase in air
  483. Coprecipitation synthesis and optical absorption property of Zn 2 Ti x Sn 1– x O 4 (0 ≤  x ≤ 1) solid solutions
  484. Use of chitosan and β-tricalcium phosphate, alone and in combination, for bone healing in rabbits
  485. Effect of high thermal expansion glass infiltration on mechanical properties of alumina-zirconia composite
  486. Supported and unsupported platinum catalysts prepared by a one-step dry deposition method and their oxygen reduction reactivity in acidic media
  487. Surface characterization and biological properties of regular dentin, demineralized dentin, and deproteinized dentin
  488. Structural, optical and electrical properties of gamma-rays exposed selenium nanowires
  489. Fabrication and mechanical testing of porous calcium phosphate bioceramic granules
  490. Tensile properties and fracture behaviour of carbon fibre filament materials
  491. Novel carboxymethyl chitosan-graphene oxide hybrid particles for drug delivery
  492. Influence of interfacial modification on the thermal conductivity of polymer composites
  493. l -cysteine-reduced graphene oxide/poly(vinyl alcohol) ultralight aerogel as a broad-spectrum adsorbent for anionic and cationic dyes
  494. Influence of polymer additive molecular weight on surface and microstructural characteristics of electrodeposited copper
  495. Effects of electromigration on resistance changes in eutectic SnBi solder joints
  496. TiO 2 /porous silicon nanocomposite passivation coating for mc-Si wafers
  497. Three-dimensional nonwoven scaffolds from a novel biodegradable poly(ester amide) for tissue engineering applications
  498. Regulatory biocompatibility requirements for biomaterials used in regenerative medicine
  499. Enhancing mechanical and fracture properties of sandwich composites using nanoparticle reinforcement
  500. Interfacial microstructure and hardness of nickel (Ni) nanoparticle-doped tin–silver–copper (Sn–Ag–Cu) solders on immersion silver (Ag)-plated copper (Cu) substrates
  501. Fabrication and characterization of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF)-Ce 0.9 Gd 0.1 O 1.95 (GDC) composite thick film for anode supported solid oxide fuel cells
  502. Synthesis of doubly functional nanowhiskers from a colloid solution including a V–Ti complex precursor
  503. Synthesis and properties of ellipsoidal hematite/silicone core-shell particles
  504. Impedance spectroscopy study of TiO 2 addition on the ceramic matrix Na 2 Nb 4 O 11
Search Result: