Paper Search Console

Home Search Page About Contact

Journal Title

Title of Journal: HNO

Search In Journal Title:

Abbravation: HNO

Search In Journal Abbravation:

Publisher

Springer Berlin Heidelberg

Search In Publisher:

DOI

10.1007/s10838-010-9126-9

Search In DOI:

ISSN

1433-0458

Search In ISSN:
Search In Title Of Papers:

Eine ungewöhnliche Raumforderung im Halsbereich

Authors: C Baum J Lautermann EJ Schock
Publish Date: 2014/07/25
Volume: 62, Issue: 7, Pages: 538-540
PDF Link

Abstract

Ein 67jähriger Patient stellte sich mit einer seit etwa 5 Monaten schnell wachsenden indolenten Raumforderung in der linken Supraklavikulargrube vor Abb 1 Eine Dysphagie eine Dyspnoe sowie eine BSymptomatik seien nicht vorhanden Anamnestisch bestanden keine relevanten Vorerkrankungen im KopfHalsBereich jedoch ein Zustand nach Radiatio eines Prostatakarzinoms

Keywords:

References

.
Search In Abstract Of Papers:
Other Papers In This Journal:
  1. Shifts in alkane-degrading bacteria genotypes during bioremediation of a vegetated coastal soil
  2. Electron bandstructure of kaolinite and its mechanism of flotation using dodecylamine as collector
  3. An integrated sustainability performance assessment and benchmarking of breweries
  4. Botulinumtoxin A gegen Hypersalivation
  5. Double aluminum recovery and its reuse in wastewater treatment
  6. Fusion of a family 9 cellulose-binding module improves catalytic potential of Clostridium thermocellum cellodextrin phosphorylase on insoluble cellulose
  7. A Critical Evaluation of Acupuncture Research
  8. Review of the finite element models for a structural integrity evaluation of the sodium-cooled fast reactor high temperature piping
  9. Hydrodynamic Characterization of a Column-type Prototype Bioreactor
  10. Heterologous expression of metabotropic glutamate receptor subtype 1 in Saccharomyces cerevisiae
  11. Degradation of aflatoxin B 1 in aqueous medium through UV irradiation
  12. Structure–property tuning in hydrothermally stable sol–gel-processed hybrid organosilica molecular sieving membranes
  13. Solid-state Fermentation for Enhanced Production of Laccase using Indigenously Isolated Ganoderma sp.
  14. Position error reduction in magnetic disk drives using a head gimbal assembly with radial head motion capability
  15. Experimental and numerical assessment of the improvement of the load-carrying capacities of butterfly-shaped coupling components in composite structures
  16. Physical–chemical explanation of fire-fighting efficiency of FHF (fast-hardening foam) based on structured silica particles
  17. Research on a new type of squirt gun for cleaning
  18. Dynamics of biomass composition and growth during recovery of nitrogen-starved Chromochloris zofingiensis
  19. Effect of crystallographic orientation on single crystal copper nanogrooving behaviors by MD method
  20. Analysis of mechanism based on two types of pulse generators in micro-EDM using single pulse discharge
  21. Vision-based system for chatter identification and process optimization in high-speed milling
  22. Numerical study on the dynamics of an electrical discharge generated vapor bubble in EDM with different shapes of the tool and the workpiece
  23. Production of Thermostable Lipase by Thermomyces lanuginosus on Solid-State Fermentation: Selective Hydrolysis of Sardine Oil
  24. Closed loop control of the planar flexible manipulator via Youla-Kucera parameterization
  25. Effect of strain on human dermal fibroblasts in a three-dimensional collagen sponge
  26. Change of ginsenoside composition in red ginseng processed with citric acid
  27. Fourier transform infrared analyses of bog and modern oak wood ( Quercus petraea ) extractives
  28. Stimmstörungen im Kindesalter
  29. Preparation and characterization of epoxy–silica networks chemically bonded through aminophenyl-trimethoxysilane
  30. Volatile organic compounds (VOC) at some sewage treatment plants in Poland
  31. Modeling the effect of γ-irradiation on reducing total bacterial populations in gochujang intended for consumption by astronauts in space programs
  32. Direct detection, cloning and characterization of a glucoside hydrolase from forest soil
  33. The Effect of Geonet Reinforcement on Bearing Capacity of Low-Compacted Soft Clay
  34. Expression, Purification, and Characterization of Endo-β- N -Acetylglucosaminidase H Using Baculovirus-Mediated Silkworm Protein Expression System
  35. A Framework for Risk-Informed Performance-Based Fire Protection Design for the Built Environment
  36. Conventional and on-line arithmetic designs for high-speed recursive digital filters
  37. Estimating the effect of process parameters on MRR, TWR and radial overcut of EDMed AISI D2 tool steel by RSM and GRA coupled with PCA
  38. Investigation on the Performance of Fire Detection Systems for Tunnel Applications––Part 1: Full-Scale Experiments at a Laboratory Tunnel
  39. Application of Fourier transform infrared (FTIR) spectroscopy for the identification of wheat varieties
  40. Biodegradation of sulfamethoxazole by individual and mixed bacteria
  41. Promiscuous activity of ( S , S )-butanediol dehydrogenase is responsible for glycerol production from 1,3-dihydroxyacetone in Corynebacterium glutamicum under oxygen-deprived conditions
  42. Production of a novel extracellular acidic lipase from Pseudomonas gessardii using slaughterhouse waste as a substrate
  43. Detection of F+ bacteriophage in large volumes of water by a membrane filter method (MFM)
  44. Reynolds number dependence of flow past a shallow open cavity
  45. Glutathione accumulation in ethanol-stat fed-batch culture of Saccharomyces cerevisiae with a switch to cysteine feeding
  46. Optimization of Rabadi -like fermented milk beverage using pearl millet
  47. Alginate beads provide a beneficial physical barrier against native microorganisms in wastewater treated with immobilized bacteria and microalgae
  48. Use of bitter gourd ( Momordica charantia ) peroxidase together with redox mediators to decolorize disperse dyes
  49. Duration-of-load and creep effects in strand-based wood composite: experimental research
  50. Effects of channel angles on extrusion-shear for AZ31 magnesium alloy: modeling and experiments
  51. Sliding-mode observer for urea-selective catalytic reduction (SCR) mid-catalyst ammonia concentration estimation
  52. Rapid determination of nitrosamines in sausage and salami using microwave-assisted extraction and dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry
  53. Lipase-catalysed kinetic resolution of secondary alcohols with improved enantioselectivity in propylene carbonate
  54. Wood pulp as an immobilization matrix for the continuous production of isopropanol and butanol
  55. Large-scale process optimization for focused ion beam 3-D nanofabrication
  56. Efficiency of Plasmocin™ on various mammalian cell lines infected by mollicutes in comparison with commonly used antibiotics in cell culture: a local experience
  57. Enhanced vanillin production from ferulic acid using adsorbent resin
  58. Persistence of Methanosaeta populations in anaerobic digestion during process instability
  59. Anaerobic degradation of monoaromatic hydrocarbons
  60. Maintenance of metabolic homeostasis and induction of cytoprotectants and secondary metabolites in alachlor-treated GmGSTU4-overexpressing tobacco plants, as resolved by metabolomics
  61. Shifts in microbial communities in bioaugmented grease interceptors removing fat, oil, and grease (FOG)
  62. A systematic review of the potential hurdles of interoperability to the emergency services in major incidents: recommendations for solutions and alternatives
  63. Isolation of sensitive nisin-sensing GFP uv bioassay Lactococcus lactis strains using FACS
  64. The dependency of diamond lapping surface morphology on crystal orientation
  65. Silk screen based dual spin-filter module for perfusion culture of adherent and non-adherent mammalian cells
  66. Production of β-carotene by expressing a heterologous multifunctional carotene synthase in Yarrowia lipolytica
  67. Effect of the Nutritional Status of Semi-continuous Microalgal Cultures on the Productivity and Biochemical Composition of Brachionus plicatilis
  68. Biosynthesis of silver nanoparticles using Lantana camara flower extract and its application
  69. A geometric constraint solver for 3-D assembly modeling
  70. Design and manufacturing of protective barriers on Fe 430 B substrates by phenyl methyl polysiloxane coatings: micromechanical response, chemical inertness, and corrosion resistance
  71. Micro liquid rotor operated by surface-acoustic-wave
  72. Optimal combination of design parameters for improving the kinematics characteristics of a midsize truck through design of experiment
  73. Robust embedding of longitudinal position into tape servo signals
  74. Bioactivities and action mechanisms of Acanthopanax species
  75. Measurement of wire electrode temperature in WEDM
  76. Application of cuckoo search algorithm to constrained control problem of a parallel robot platform
  77. Efficiency of chelating agents in retaining sludge-borne heavy metals in intensively applied agricultural soils
  78. Isolation and the interaction between a mineral-weathering Rhizobium tropici Q34 and silicate minerals
  79. Biohydrogen production by Enterobacter cloacae and Citrobacter freundii in carrier induced granules
  80. The Effect of Axial Concentration Gradient on Electrophoretic Motion of a Charged Spherical Particle in a Nanopore
  81. Selection of optimal cutting conditions for pocket milling using genetic algorithm
  82. Evaluating an Inquiry-based Bioinformatics Course Using Q Methodology
  83. Fabrication and evaluation of micromill-grinding tools by electroplating CBN
  84. Cloning and expression analysis of three secreted protein genes from wheat stripe rust fungus Puccinia striiformis f. sp. tritici
  85. Praktische Anwendung von Botulinumtoxin im Kopf-Hals-Bereich
  86. Praktische Anwendung von Botulinumtoxin im Kopf-Hals-Bereich
  87. Characterization of Microplasma Sprayed Hydroxyapatite Coating
  88. Effect of punch angle on energy absorbing characteristics of tube-type crash elements
  89. Theoretical study of electric energy consumption for self-powered chaos signal generator
  90. Does visualization enhance complex problem solving? The effect of causal mapping on performance in the computer-based microworld Tailorshop
  91. Stoichiometry of microbial continuous-flow purification of toluene-contaminated air
  92. Applying bidirectional kinematics to assembly error analysis for five-axis machine tools with general orthogonal configuration
  93. Type of bacterial starter culture, aging and fermentation effects on some characteristics of inoculated beef sausages
  94. Antioxidant activity of rosemary and thyme by-products and synergism with added antioxidant in a liposome system
  95. Webwatch
  96. Rethinking Women and Their Bodies in the Age of Biotechnology: Feminist Commentaries on the Hwang Affair
  97. The synthesis technique of polyacrylic acid superplasticizer
  98. Germination and growth of six plant species on contaminated soil with spent oil
  99. Analysis of PDT noise originating from driving method of a HDD spindle motor
  100. Community structure and transcript responses of anammox bacteria, AOA, and AOB in mangrove sediment microcosms amended with ammonium and nitrite
  101. Selection of optimal reference genes for expression analysis in the entomopathogenic fungus Beauveria bassiana during development, under changing nutrient conditions, and after exposure to abiotic stresses
  102. Novel MoS 2 microspheres formed by solid-state assembly of ultrathin nanosheets
  103. Simulation modeling for comparative evaluation of supply chain management strategies
  104. Auditive Verarbeitungs- und Wahrnehmungsstörungen (AVWS): Zusammenfassung und aktualisierter Überblick
  105. Hot deformation behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy with acicular microstructure
  106. Structural and optical properties of Ce 3+ , Yb 3+ Co-doped YAG films by pulsed laser deposition
  107. The Effects of Bacterial Leaching on Metal Partitioning in Sewage Sludge
  108. Stress development and film formation in multiphase composite latexes
  109. The impact of solvent characteristics on performance and process stability of printed carbon resistive materials
  110. The solid lubricating material experiment device for Shenzhou-7 Spaceship
  111. Exhausted Jackknife Validation Exemplified by Prediction of Temperature Optimum in Enzymatic Reaction of Cellulases
  112. Three-dimensional finite element analysis of a newly designed onplant miniplate anchorage system
  113. Assessment of Safe Service Life of Materials Based on Corrosion Conditions
  114. High-yield production of short chain length poly(ε- l -lysine) consisting of 5–20 residues by Streptomyces aureofaciens , and its antimicrobial activity
  115. Selection of process parameters for producing high quality defatted sesame flour at pilot scale
  116. Is there comparable morbidity in pylorus-preserving and pylorus-resecting pancreaticoduodenectomy? A meta-analysis
  117. Self-organizing fuzzy control of constant cutting force in turning
  118. Optimization of nano-emulsions production by microfluidization
  119. Quantitative dissection of antioxidative bioactive components in cultivated and wild sesame germplasm reveals potentially exploitable wide genetic variability
  120. Cloning and Characterization of Microsatellite Loci in a Gorgonian Coral, Junceella juncea (Anthozoa; Octocorallia; Ellisellidae) and Its Application in Clonal Genotyping
  121. Silver-decorated orthorhombic nanotubes of lithium vanadium oxide: an impeder of bacterial growth and biofilm
  122. Compositionally Graded Thermal Barrier Coating by Hybrid Thermal Spraying Route and its Non-isothermal Oxidation Behavior
  123. Structure and bio-properties of extracellular polysaccharide from Bacillus sp. strain LBP32 Isolated from LUOBOPO desert
  124. A thermostable feruloyl-esterase from the hemicellulolytic bacterium Thermobacillus xylanilyticus releases phenolic acids from non-pretreated plant cell walls
  125. Oxidative stability, chemical composition and organoleptic properties of seinat ( Cucumis melo var. tibish ) seed oil blends with peanut oil from China
  126. Auto-focusing actuator and camera module including flexible diaphragm for mobile phone camera and wireless capsule endoscope
  127. A numerical prediction on the reduction of microorganisms with UV disinfection
  128. Contamination of commercially available L- tryptophan by related substances
  129. Who are the Science Teachers that Seek Professional Development in Research Experience for Teachers (RET’s)? Implications for Teacher Professional Development
  130. True Collective Intelligence? A Sketch of a Possible New Field
  131. Selection of optimum tool geometry and cutting conditions using a surface roughness prediction model for end milling
  132. Contributions of Scientists of the State Scientific Research Institute of Chemmotology (GosNII Khimmotologii) to the Theory and Practice of Chemmotology of Lubricating Oils
  133. Distortion behavior of hydro turbine blade castings during heat treatment processes under variation of seasonal temperature
  134. Novel heat dissipation design for light emitting diode applications
  135. Structure, photoluminescence and electrical properties of Eu–Nd codoped CaBi 4 Ti 4 O 15 synthesized by sol–gel method
  136. Production of protocatechuic acid by Corynebacterium glutamicum expressing chorismate-pyruvate lyase from Escherichia coli
  137. Hot embossing of thermoplastic multilayered stacks
  138. Effects of microstructure on material properties of modified 9Cr-1Mo steel subject to creep-fatigue
  139. Identification of Desirable Precursor Properties for Solution Precursor Plasma Spray
  140. Production and characterisation of recombinant α- l -arabinofuranosidase for production of xylan hydrogels
  141. Estimation of the fate of microbial water quality contaminants in a South African river
  142. In-pipe micromachine locomotion via the inertial stepping principle
  143. Automation of main pipe-rotating welding scheme for intersecting pipes
  144. Intrinsic spatial resolution evaluation of the X’tal cube PET detector based on a 3D crystal block segmented by laser processing
  145. Connecting the STEM dots: measuring the effect of an integrated engineering design intervention
  146. Optimal disc cutters plane layout design of the full-face rock tunnel boring machine (tbm) based on a multi-objective genetic algorithm
  147. Strain rate-sensitive analysis for grinding damage of brittle materials
  148. Secretory production of single-chain antibody (scFv) in Brevibacillus choshinensis using novel fusion partner
  149. Coexistence of quorum-quenching and quorum-sensing in tropical marine Pseudomonas aeruginosa strain MW3A
  150. Facilitating a student-educator conceptual model of dispositions towards critical thinking through interactive management
  151. Effect of Infusion Method and Parameters on Solid Gain in Blueberries
  152. Sorption isotherms and kinetics of chromium uptake from wastewater using natural sorbent material
  153. Isolation and characterization of a novel ε-caprolactam-degrading microbe, Acinetobacter calcoaceticus , from industrial wastewater by chemostat-enrichment
  154. Identification of novel genes responsible for ethanol and/or thermotolerance by transposon mutagenesis in Saccharomyces cerevisiae
  155. Control of endwall secondary flow in a compressor cascade with dielectric barrier discharge plasma actuation
  156. Model reduction of a multibody system including a very flexible beam element
  157. Lanthanum biosorption by a Pseudomonas sp.: equilibrium studies and chemical characterization
  158. Review Authorship Attribution in a Similarity Space
  159. Combustion development of a Bi-Fuel engine
  160. An efficient callus proliferation protocol and rhaponticin accumulation of Rheum franzenbachii Munt., a medicinal plant
  161. Methyl jasmonate in conjunction with ethanol treatment increases antioxidant capacity, volatile compounds and postharvest life of strawberry fruit
  162. Tool for environmental performance assessment of city bus transit operations: case studies
  163. Isolation and characterization of BTEX tolerant and degrading Pseudomonas putida BCNU 106
  164. Physical properties of ebony seed ( Pithecellobium flexicaule ) and functional properties of whole and defatted ebony seed meal
  165. Effect of roasting on the radical scavenging activity of cocoa beans
  166. Stereo-based real-time 6-DoF work tool tracking for robot programing by demonstration
  167. Assessment of noise exposure and associated health risk in school environment
  168. Empirical Technoscience Studies in a Comtean World: Too Much Concreteness?
  169. Super-resolution reconstruction of synthetic-aperture radar image using adaptive-threshold singular value decomposition technique
  170. Some characteristics of acetylated, cross-linked and dual modified Indian rice starches
  171. Influences of rotation speed on microstructures and mechanical properties of 6061-T6 aluminum alloy joints fabricated by self-reacting friction stir welding tool
  172. Intrinsic Characteristics of Cr 6+ -Resistant Bacteria Isolated from an Electroplating Industry Polluted Soils for Plant Growth-Promoting Activities
  173. Current status of transcriptional regulation systems
  174. Consistent Web site updating based on bidirectional transformation
  175. Characterization and selection of Lactobacillus strains for their effect on bile tolerance, taurocholate deconjugation and cholesterol removal
  176. Influences of preferred orientation growth on electrical properties of ZnO:Al films by sol–gel method
  177. Evaluation of the operationally defined soluble, insoluble, and complexing copper consumed through drinking water in human saliva
  178. Choosing a suitable sample size in descriptive sampling
  179. On Linsu Kim’s Imitation to Innovation: The Dynamics of Korea’s Technological Learning
  180. Mikrochirurgische Mittelohroperationen
  181. Combined Superfine Grinding and Heat-Shearing Treatment for the Microparticulation of Whey Proteins
  182. Constitutive models in stability analysis of rock slope
  183. Improvement of the quality of gluten-free rice pound cake using extruded rice flour
  184. A hybrid approach of ordinal optimization and iterated local search for manufacturing cell formation
  185. Cases of Science Professors’ Use of Nature of Science
  186. Examination and modification of equivalent delamination factor for assessment of high speed drilling
  187. Chronic HBV Carrier’s acceptance of regular surveilling program in China
  188. Exploiting the intrinsic hydrocarbon-degrading microbial capacities in oil tank bottom sludge and waste soil for sludge bioremediation
  189. Removal of PCR inhibiting substances in sewage sludge amended soil
  190. Asymmetric Stetter reactions catalyzed by thiamine diphosphate-dependent enzymes
  191. Chemical composition of Nigella sativa L. seed extracts obtained by supercritical carbon dioxide
  192. Nicotine degradation by two novel bacterial isolates of Acinetobacter sp. TW and Sphingomonas sp. TY and their responses in the presence of neonicotinoid insecticides
  193. Molecular identification of the microbial diversity in two sequencing batch reactors with activated sludge
  194. Phospholipids and protein adaptation of Pseudomonas sp. to the xenoestrogen tributyltin chloride (TBT)
  195. A time-domain higher-order boundary element method for 3D forward-speed radiation and diffraction problems
  196. Lytic enzyme discovery through multigenomic sequence analysis in Clostridium perfringens
  197. Perstraction of intracellular pigments by submerged cultivation of Monascus in nonionic surfactant micelle aqueous solution
  198. Piezoelectric in-plane microplate resonators based on contour and flexure-actuated modes
  199. The transcriptional regulator c2h2 accelerates mushroom formation in Agaricus bisporus
  200. Synergistic effect and mechanisms of compound bioflocculant and AlCl 3 salts on enhancing Chlorella regularis harvesting
  201. A review of fabrication processes for vertical comb drives
  202. TB trifusion antigen adsorbed on calcium phosphate nanoparticles stimulates strong cellular immunity in mice
  203. The effect of the cspA 5′-untranslated region on recombinant protein production at low temperature
  204. Understanding the antimicrobial activity behind thin- and thick-rolled copper plates
  205. Phytase Production and Development of an Ideal Dephytinization Process for Amelioration of Food Nutrition Using Microbial Phytases
  206. Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2014
  207. Preparation and characterization of polylactide/montmorillonite nanocomposites
  208. Phenomenological modelling of micro-cutting based on experimental results
  209. Quality and nutritional property changes in stored dried apricots fumigated by sulfur dioxide
  210. Introduction of a new visbreaking unit at Salavatnefteorgsintez Co.
  211. Plant Hsp90 and Its Partner Proteins
  212. Research on the feature extraction of DC space charge behavior of oil-paper insulation
  213. Inhibitory Effects of Mediterranean Sponge Extracts and Metabolites on Larval Settlement of the Barnacle Balanus amphitrite
  214. Controlled release of allyl isothiocyanate from brown algae Laminaria japonica and mesoporous silica MCM-41 for inhibiting food-borne bacteria
  215. Optimization of enzymatic hydrolysis of guar gum using response surface methodology
  216. Die fatigue life design and assessment via CAE simulation
  217. Rheological and physical properties of camel and cow milk gels enriched with phosphate and calcium during acid-induced gelation
  218. Safeguarding bacterial resources promotes biotechnological innovation
  219. Characterization of a novel xylanase from Armillaria gemina and its immobilization onto SiO 2 nanoparticles
  220. Study on process parameters and its analytic application for nonaxisymmetric rectangular cup of multistage deep drawing process using low carbon thin steel sheet
  221. Prediction of cutting force, tool wear and surface roughness of Al6061/SiC composite for end milling operations using RSM
  222. Safeguarding bacterial resources promotes biotechnological innovation
  223. Evaluation of somaclonal variation for genetic improvement of patchouli ( Pogostemon patchouli ), an exclusively vegetatively propagated aromatic plant
  224. Comparative life cycle assessment of solid waste management strategies
  225. Effects of hydrocolloids as texture improver in coriander bread
  226. Prediction of fatigue life of welding tool in friction stir welding of AA6061-T6
  227. Characterization of a dUTPase from the Hyperthermophilic Archaeon Thermococcus onnurineus NA1 and Its Application in Polymerase Chain Reaction Amplification
  228. Foam-Filled Grooved Tubes with Circular Cross-Section Under Axial Compression: A Theoretical Analysis
  229. Xylitol production from DEO hydrolysate of corn stover by Pichia stipitis YS-30
  230. Binary Mixtures of Modified Starch, Maltodextrin and Chitosan as Efficient Encapsulating Agents of Fennel Oleoresin
  231. Biorefining of wood: combined production of ethanol and xylanase from waste fiber sludge
  232. Specificity of a DNA-based (DNAzyme) peroxidative biocatalyst
  233. Investigation of emulsion for die sinking EDM
  234. Overall optimization of Rankine cycle system for waste heat recovery of heavy-duty vehicle diesel engines considering the cooling power consumption
  235. Synthesis of nanosized carbonated apatite by a modified Pechini method: hydroxyapatite nucleation from a polymeric matrix
  236. Prediction of cutting force, tool wear and surface roughness of Al6061/SiC composite for end milling operations using RSM
  237. Fuel economy comparison of conventional drive trains series and parallel hybrid electric step vans
  238. A topological-free method for three-axis tool path planning for generalized radiused end milled cutting of a triangular mesh surface
  239. Heat Fluxes and Flame Lengths from Fires Under Ceilings
  240. An exceptionally cold-adapted alpha-amylase from a metagenomic library of a cold and alkaline environment
  241. A newly isolated fungus participates in the corrosion of concrete sewer pipes
  242. Enzymatic transformation of nitro-aromatic compounds by a flavin-free NADH azoreductase from Lysinibacillus sphaericus
  243. Nonlocal beam models for buckling of nanobeams using state-space method regarding different boundary conditions
  244. Do we need new antibiotics? The search for new targets and new compounds
  245. Production and Characterization of a Single-Chain Fv Antibody–Alkaline Phosphatase Fusion Protein Specific for Clenbuterol
  246. Determination of the mechanical properties of Castanea sativa Mill. using ultrasonic wave propagation and comparison with static compression and bending methods
  247. Effect of leading edge boundary layer thickness on dimple flow structure and separation control
  248. Induction of different activated phenotypes of mouse peritoneal macrophages grown in different tissue culture media
  249. Lehre der HNO-Heilkunde in Deutschland
  250. On deadlock-free control of automated manufacturing systems with flexible routes and assembly operations using Petri nets
  251. Dietary l -cysteine inhibits d -galactosamine-induced acute liver injury in rats
  252. Kinetic study of enzymatic hydrolysis of starch isolated from sorghum grain cultivars by various methods
  253. Effect of excess methanol addition on the morphology of sonogel-derived silica
  254. Changes of chemical and nutrient composition of porcine blood during fermentation by Aspergillus oryzae
  255. Real-time PH-based interpolation algorithm for high speed CNC machining
  256. Assessment of seawater mixing in a coastal aquifer by high resolution electrical resistivity tomography
  257. Detection of histamine-producing bacteria using polymerase chain reaction techniques and DNA probes
  258. Flow instability due to cryogenic cavitation in the downstream of orifice
  259. Influence of mechanical behavior between the grains on stress fluctuation of aluminum alloy thick plate
  260. Molecular cloning and heterologous expression of an acid stable xylanase gene from Alternaria sp. HB186
  261. Study of kinetic parameters for the production of recombinant rabies virus glycoprotein
  262. Expression of truncated tobacco osmotin in Escherichia coli : purification and antifungal activity
  263. Influence of mechanical behavior between the grains on stress fluctuation of aluminum alloy thick plate
  264. Chemical perception and behavioral response of freshwater fish to 2-methylisoborneol
  265. Removal of Pb(II) ions from aqueous systems using thiol-functionalized cobalt-ferrite magnetic nanoparticles
  266. Prognoseabschätzung der peripheren Fazialisparese
  267. Evaluation of micromechanical manufacturing processes for microfluidic devices
  268. Reliability of Pt ohmic contact on an undoped 3C-SiC micro-electrothermal device
  269. A two-dimensional simulation model for the molded underfill process in flip chip packaging
  270. Optimization of sterilization conditions for retorted meatballs based on prediction of heat penetration
  271. A study on the microstructural property and thermal property of Ti-alloys without Al as biomaterials
  272. Real-time monitoring of hypertrophy in HL-1 cardiomyocytes by impedance measurements reveals different modes of growth
  273. Impacts of variations in elemental nutrient concentration of Chardonnay musts on Saccharomyces cerevisiae fermentation kinetics and wine composition
  274. Occurrence of Clostridium spp. in ewe’s milk: enumeration and identification of isolates
  275. Effect of acid value on the esterification mechanism of maleinized soybean oil with cotton
  276. Comparison of ultra-high-pressure water jet and conventional rotating blade cutting for the production of fresh-cut iceberg ( Lactuca sativa L.) and endive ( Cichorium endivia L.)
  277. Isolation and functional characterization of polyunsaturated fatty acid elongase (AsELOVL5) gene from black seabream ( Acanthopagrus schlegelii )
  278. Modulation of intestinal microbiota in mice by kefir administration
  279. Removal of lead (II) and nickel (II) ions from aqueous solution using activated carbon prepared from rapeseed oil cake by Na 2 CO 3 activation
  280. NIR and PLS discriminant analysis for predicting the processability of malt during lautering
  281. NIR and PLS discriminant analysis for predicting the processability of malt during lautering
  282. Isolation and characterization of cancer stem cells from cervical cancer HeLa cells
  283. STL file generation from digitised data points based on triangulation of 3D parametric surfaces
  284. Effects of lactoferrin derived peptides on simulants of biological warfare agents
  285. Pulsed Electric Field Induced Aggregation of Food Proteins: Ovalbumin and Bovine Serum Albumin
  286. Design and fabrication of a square shape bulk mode MEMS resonators
  287. Ammonium removal performance of anaerobic ammonium-oxidizing bacteria immobilized in polyethylene glycol gel carrier
  288. Fermentation of quinoa and wheat slurries by Lactobacillus plantarum CRL 778: proteolytic activity
  289. Superoxide dismutase from hen’s egg yolk can protect fatty acids from peroxidative damage
  290. Determination of radon exhalation from granite, dolerite and marbles decorative stones of the Azad Kashmir area, Pakistan
  291. Biosynthesis of ethylene glycol in Escherichia coli
  292. Glyceryl trinitrate and caprylic acid for the mitigation of the Desulfovibrio vulgaris biofilm on C1018 carbon steel
  293. e-Business systems integration: a systems perspective
  294. In Situ Monitoring of Particle Consolidation During Low Pressure Cold Spray by Ultrasonic Techniques
  295. Plastic fats from sal, mango and palm oil by lipase catalyzed interesterification
  296. Simple synthesis of Co 3 O 4 nanoflakes using a low temperature sol–gel method suitable for photodegradation of dyes
  297. Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite
  298. Cunninghamella as a Microbiological Model for Metabolism of Histamine H 3 Receptor Antagonist 1-[3-(4- tert -Butylphenoxy)propyl]piperidine
  299. Bioactive titanium metal surfaces with antimicrobial properties prepared by anodic oxidation treatment
  300. Comparative DFT study of [Mg(CHZ) 3 ](ClO 4 ) 2 and [Mg(CHZ) 3 ](NO 3 ) 2 (CHZ=Carbohydrazide)
  301. Enzymatic and non-enzymatic antioxidant potentials of Chlorella vulgaris grown in effluent of a confectionery industry
  302. Chemical and anticorrosion characterization of polysilsesquioxane coatings catalyzed by different acids
  303. Analytical research on intellectual control of yarning characteristics for cotton collocation and rotor spinning
  304. The effect of PO 2,5 and AlO 1,5 additions on structural changes and crystallization behavior of SiO 2 -TiO 2 sol-gel derived glasses and thin films
  305. Fuzzy analytic hierarchy process (FAHP) for multi-criteria selection of microalgae harvesting and drying processes
  306. Biodegradation of toluene by the new fungal isolates Paecilomyces variotii and Exophiala oligosperma
  307. Improvement of Cephalosporin C Production by Recombinant DNA Integration in Acremonium chrysogenum
  308. High-Temperature Exposure Studies of HVOF-Sprayed Cr 3 C 2 -25(NiCr)/(WC-Co) Coating
  309. Investigating the Effects of Table Grape Package Components and Stacking on Airflow, Heat and Mass Transfer Using 3-D CFD Modelling
  310. Use of wastewater for crop production under arid and saline conditions: yield and hygienic quality of the crop and soil contaminations
  311. Optimization of mineral salts in medium for enhanced production of pullulan by Aureobasidium pullulans HP-2001 using an orthogonal array method
  312. Simulation and experiment for crack arrest in remanufacturing
  313. The Efficiency of Temperature-Shift Strategy to Improve the Production of α-Amylase by Bacillus sp. in a Solid-State Fermentation System
  314. In vitro generation of type-II pneumocytes can be initiated in human CD34 + stem cells
  315. The development of a quality prediction system for aluminum laser welding to measure plasma intensity using photodiodes
  316. Review of Thermal Spray Coating Applications in the Steel Industry: Part 1—Hardware in Steel Making to the Continuous Annealing Process
  317. The sensory quality of dry fermented sausages as affected by fermentation stage and curing agents
  318. Modification of imitation cheese structure and rheology using pre-gelatinised starches
  319. Antiwetting silica–gelatin nanohybrid and transparent nano coatings synthesised through an aqueous sol–gel process
  320. Modelling and simulation of fixtures during grinding
  321. Validation of 4 type-STR analysis for identification of 50 Korean
  322. Computational fluid dynamics for effects of coolants on on-chip cooling capability with carbon nanotube micro-fin architectures
  323. Management of gas gangrene in Wenchuan earthquake victims
  324. Sealing HVOF Thermally Sprayed WC-CoCr Coatings by Sol-Gel Methods
  325. Analysis method of noise power spectrum for medical monochrome liquid crystal displays
  326. Assessment of Genetic Diversity and Identification of Informative Molecular Markers for Germplasm Characterization in Caribbean Stylo ( Stylosanthes hamata )
  327. Laser cladding Al-Si/Al 2 O 3 -TiO 2 composite coatings on AZ31B magnesium alloy
  328. Chromatic characteristics and anthocyanin compositions of cabernet sauvignon wines: Influence of indigenous Saccharomyces cerevisiae strains in Ningxia, China
  329. Explicit formulation for natural frequencies of double-beam system with arbitrary boundary conditions
  330. Decolorization of a dye industry effluent by Aspergillus fumigatus XC6
  331. Sugarcane bagasse as support for immobilization of Bacillus pumilus HZ-2 and its use in bioremediation of mesotrione-contaminated soils
  332. Wettability and surfactivity of sodium phosphate surfactants in strong alkali solutions
  333. Synthesis, Characterization, and Oil Recovery Application of Biosurfactant Produced by Indigenous Pseudomonas aeruginosa WJ-1 Using Waste Vegetable Oils
  334. A rare sugar xylitol. Part II: biotechnological production and future applications of xylitol
  335. Electrochemical battery model and its parameter estimator for use in a battery management system of plug-in hybrid electric vehicles
  336. Environmental impact of castor oil catalytic transfer hydrogenation
  337. Recovery of metals and other beneficial products from coal fly ash: a sustainable approach for fly ash management
  338. Electrospun silk fibroin mat enhances tendon-bone healing in a rabbit extra-articular model
  339. Cells adhered and cultured on microcantilevers
  340. Metabolomic and chemometric study of Achras sapota L. fruit extracts for identification of metabolites contributing to the inhibition of α-amylase and α-glucosidase
  341. Isolation of phenanthrene-degrading bacteria and characterization of phenanthrene metabolites
  342. Regeneration-Based Quantification of Coumarins (Scopoletin and Scoparone) in Abutilon indicum In Vitro Cultures
  343. Elicitation of a reference process model for tool-based micro technologies for planning and controlling purposes and user support
  344. Induced nonlocal electric wave propagation of boron nitride nanotubes
  345. Papers, Please and the systemic approach to engaging ethical expertise in videogames
  346. Codon Optimization of the “Bos Taurus Chymosin” Gene for the Production of Recombinant Chymosin in Pichia pastoris
  347. Establishment of a quadruplex real-time PCR for screening of genetically modified tomatoes
  348. Integration of hup Genes into the Genome of Chickpea- Rhizobium Through Site-Specific Recombination
  349. Optimization of microwave assisted extraction (MAE) and soxhlet extraction of phenolic compound from licorice root
  350. LTO cartridge reel deflection under tape packing stresses
  351. In-situ fabrication of an out-of-plane microlens with pre-definable focal length
  352. Comparison of structure and phase change characteristic of microencapsulated core/shell Al–Si alloy microparticles synthesized by two methods
  353. Preparation, characterization, bioavailability in vitro and in vivo of tea polysaccharides–iron complex
  354. Kinematic and dynamic modeling of viscoelastic robotic manipulators using Timoshenko beam theory: theory and experiment
  355. A Dynamic Low-Frequency Vibration Damper for Bearings of Turbine-Generator Sets
  356. Study of Genetic Diversity of Orange-Spotted Grouper, Epinephelus coioides , from Thailand and Indonesia Using Microsatellite Markers
  357. A Distributed Mechanism for Handling of Adaptive/Intelligent Selfish Misbehaviour at MAC Layer in Mobile Ad Hoc Networks
  358. Analysis and predictive modeling of performance parameters in electrochemical drilling process
  359. Dynamic calibration method of inertial measurement units
  360. Comparison of fluorescence in situ hybridization and immunohistochemistry for assessment of HER-2 status in breast cancer patients
  361. Identification of New Dominant-Negative Mutants of Anthrax Protective Antigen Using Directed Evolution
  362. RETRACTED ARTICLE: Surgical selection for late pancreatic head carcinoma without gastric outlet obstruction
  363. Effects of extended punching on wear of the WC/Co micropunch and the punched microholes
  364. PPM1D silencing by lentiviral-mediated RNA interference inhibits proliferation and invasion of human glioma cells
  365. Bioencapsulation of living yeast ( Pichia pastoris ) with silica after transformation with lysozyme gene
  366. Development of real-time PCR assays for the detection of lupin residues in food products
  367. Astilbin inhibits proliferation of rat aortic smooth muscle cells induced by angiotensin II and down-regulates expression of protooncogene
  368. Chatter reliability of milling system based on first-order second-moment method
  369. Al 2 O 3 coating for improving thermal stability performance of manganese spinel battery
  370. Physiological characterization of recombinant Saccharomyces cerevisiae expressing the Aspergillus nidulans phosphoketolase pathway: validation of activity through 13 C-based metabolic flux analysis
  371. Emission constrained power system planning: a pinch analysis based study of Indian electricity sector
  372. Bacterial quorum sensing and cell surface electrokinetic properties
  373. Determination of the Induced Voltages When Nonparallel Power Transmission Lines are Adjacent to One Another
  374. FEA-based prediction of machined surface errors for dynamic fixture-workpiece system during milling process
  375. Aerosinusitis
  376. Inspection of reinforced concrete interface delamination using ultrasonic guided wave non-destructive test technique
  377. Galanthamine and Related Alkaloids Production by Leucojum aestivum L. Shoot Culture using a Temporary Immersion Technology
  378. Optical properties of yellow-light-emitting LiZnVO 4 :Eu 3+ phosphor prepared by sol–gel method
  379. Decolorization of Fast red by metabolizing cells of Oenococcus oeni ML34
  380. DAF treatment of a reservoir water supply: comparison with in-line direct filtration and control of organic matter
  381. Calibration and adjustment of center of mass (COM) based on EKF during in-flight phase
  382. Croatian barberry ( Berberis croatica Horvat): a new source of berberine—analysis and antimicrobial activity
  383. Neutralization theory and online software piracy: An empirical analysis
  384. Effect of microbial transglutaminase crosslinking on the functional properties of yak caseins: a comparison with cow caseins
  385. Gentherapie und Stammzellen für das Innenohr
  386. Evaluation of dough rheological properties and bread texture of pearl millet-wheat flour mix
  387. Identification of four scallop species using PCP and restriction analysis of the ribosomal DNA internal transcribed spacer region
  388. Tool wear behaviors and its effect on machinability in dry high-speed milling of magnesium alloy
  389. A Study on the Stability and Enzymatic Activity of Yeast Alcohol Dehydrogenase in Presence of the Self-Assembling Block Copolymer Poloxamer 407
  390. Two temperature theory of initially stressed electro-microstretch medium without energy dissipation
  391. Investigations on the effects of tool wear on chip formation mechanism and chip morphology using acoustic emission signal in the microendmilling of aluminum alloy
  392. WS-5995 B, an antifungal agent inducing differential gene expression in the conifer pathogen Heterobasidion annosum but not in Heterobasidion abietinum
  393. Lebensbedrohliche Differenzialdiagnosen des Drehschwindels und des Hörsturzes
  394. Decreased Cyr61 under hypoxia induces extravillous trophoblasts apoptosis and preeclampsia
  395. CuAl 2 O 4 powder synthesis by sol-gel method and its photodegradation property under visible light irradiation
  396. Characterization of microbial compositions in a thermophilic chemostat of mixed culture fermentation
  397. Design of compact and wide bandwidth SPDT with anti-stiction torsional RF MEMS series capacitive switch
  398. Experimental research on KDP crystal slicing with resin bonded diamond abrasive wire saw
  399. Vibrational energy scavenging with Si technology electromagnetic inertial microgenerators
  400. Drying kinetics and physico-chemical characteristics of Osmo- dehydrated Mango, Guava and Aonla under different drying conditions
  401. Numerical analysis of cement calciner fuel efficiency and pollutant emissions
  402. Lignin Peroxidase from Streptomyces viridosporus T7A: Enzyme Concentration Using Ultrafiltration
  403. Elastic coefficient analysis on planar S-shaped micro spring under high impact load
  404. Purification and properties of mannanase from Bacillus subtilis
  405. Vascular Dysfunction in Hypertension Revealed by Fourier Analysis of Aortic Blood Flow
  406. Effect of heat and autoclave on allergenicity of porcine serum albumin
  407. Dry rotary swaging–approaches for lubricant free process design
  408. Loose architecture of multi-level massive geospatial data based on virtual quadtree
  409. Sporicidal efficacy of pH-adjusted bleach for control of bioburden on production facility surfaces
  410. Protease and γ-glutamyltranspeptidase activities of bacillus spp. isolated from rice straw
  411. Co-occurrence of nitrite-dependent anaerobic ammonium and methane oxidation processes in subtropical acidic forest soils
  412. Atmospheric Plasma Spraying of High Melting Temperature Complex Perovskites for TBC Application
  413. The complete stress-strain curve of recycled aggregate concrete under uniaxial compression loading
  414. Modal analysis of spindles while accounting for system decay and its application to machine tool chatter prevention
  415. Preliminary geoherbalism study of Dendrobium officinale food by DNA molecular markers
  416. Fumaric acid production by fermentation
  417. Porous flame-retarded asphalt pavement for highway tunnel
  418. View-Aware Image Object Compositing and Synthesis from Multiple Sources
  419. Laser capture microdissection and metagenomic analysis of intact mucosa-associated microbial communities of human colon
  420. GPS patch antenna performance by modification of Zn (1−x) Ca x Al 2 O 4 -based microwave dielectric ceramics
  421. Kinetics Characteristics and Efficiency of Carbon Dioxide Absorption from Biogas by Dolomite Suspensions
  422. Failure analysis of SUS304 sheet during hydro-bulging based on GTN ductile damage model
  423. Structure, Regulation and Biosynthesis of Phosphoenolpyruvate Carboxylase from C 4 Plants
  424. Anti-inflammatory activity of ethanolic extract of Sargassum sagamianum in RAW 264.7 cells
  425. Investigation on contact parameters in cold rotary forging using a 3D FE method
  426. Analysis tools in the study of distributed decision-making: a meta-study of command and control research
  427. A novel methodology independent of fermentation rate for assessment of the fructophilic character of wine yeast strains
  428. Monoethanolamine extraction of copper-preservative-treated wood and reuse of the extract for wood preservation
  429. Double Rare-Earth Oxides Co-doped Strontium Zirconate as a New Thermal Barrier Coating Material
  430. The formation and effect of interlayer gap in dry drilling of stacked metal materials
  431. Identification and Expression of an APETALA2 -Like Gene from Nelumbo nucifera
  432. The formation and effect of interlayer gap in dry drilling of stacked metal materials
  433. Identification and Expression of an APETALA2 -Like Gene from Nelumbo nucifera
  434. Rheological properties of ultrasound treated apple, cranberry and blueberry juice and nectar
  435. Study on process and mechanism of laser drilling in water and air
  436. Analysis of suspension stability for nanofluid applied in minimum quantity lubricant grinding
  437. The rhizospheres of traditional medicinal plants in Panxi, China, host a diverse selection of actinobacteria with antimicrobial properties
  438. A job-classifying and data-mining approach for estimating job cycle time in a wafer fabrication factory
  439. Loops Adjacent to Catalytic Region and Molecular Stability of Man1312
  440. Optimisation of Batch Culture Conditions for Cell-Envelope-Associated Proteinase Production from Lactobacillus delbrueckii subsp. lactis ATCC® 7830™
  441. Application of corporate social responsibility approach in Bulgaria to support sustainable tourism development
  442. A new reference point for patient dose estimation in neurovascular interventional radiology
  443. Effect of electro-acupuncture stimulation of Ximen (PC4) and Neiguan (PC6) on remifentanil-induced breakthrough pain following thoracal esophagectomy
  444. Continuous Outlier Monitoring on Uncertain Data Streams
  445. Prokaryotic Expression, Purification and Characterization of Aspergillus sulphureus β-Mannanase and Site-Directed Mutagenesis of the Catalytic Residues
  446. The Bioconversion of Pretreated Cashew Apple Bagasse into Ethanol by SHF and SSF Processes
  447. Comparison of the milk fatty acid composition from dairy cows fed high-sugar ryegrass, low-sugar ryegrass, or maize
  448. Distribution of impurities in pyrolysis feedstock and their transformation products in process flows of pyrogas preparation unit for compression and generation of dilution steam
  449. Overview on economics and technology development of rubber seed utilisation in Southeast Asia
  450. Experimental study on performance of contra-rotating axial flow fan
  451. Preparation of Ni60-Cr 3 C 2 coating by plasma spraying, plasma re-melting and plasma spray welding on W6Mo5Cr4V2
  452. Anti-adipogenic effects of Corni fructus in 3T3-L1 preadipocytes
  453. Remediation of the effect of adding cyanides on an algal/bacterial treatment of a mixture of organic pollutants in a continuous photobioreactor
  454. Artefacts as designed, artefacts as used: resources for uncovering activity dynamics
  455. Plant regeneration from zygotic embryo-derived embryogenic cell suspension cultures of Ranunculus kazusensis
  456. A study on microinjection moulding using moulding blocks by additive micromanufacturing
  457. Concave microwell plate facilitates chondrogenesis from mesenchymal stem cells
  458. Stress-Strain State and Reinforcement of Compensating Sections of Steel/Reinforced-Concrete Pressure Conduits
  459. Sprachentwicklungsstörung bei Mosaik-Trisomie 8
  460. Characteristic analysis of unsteady viscous flow around a cavitating propeller
  461. Effect of supplementation of drumstick ( Moringa oleifera ) and amaranth ( Amaranthus tricolor ) leaves powder on antioxidant profile and oxidative status among postmenopausal women
  462. Incorporated probability that a fleet meets a given permissible value for the hull girder section modulus loss
  463. Parallel machine scheduling with earliness-tardiness penalties and space limits
  464. Biosorption of Heavy Metal Ions (Cu 2+ , Mn 2+ , Zn 2+ , and Fe 3+ ) from Aqueous Solutions Using Activated Sludge: Comparison of Aerobic Activated Sludge with Anaerobic Activated Sludge
  465. Dose reduction in general radiography for adult patients by use of a dual-side-reading photostimulable phosphor plate in a computed radiography system
  466. Neue Aspekte HPV-positiver Kopf-Hals-Karzinome
  467. Basic study on pulse generator for micro-EDM
  468. Stochastic analysis of a collection process of submicron particles on a single fiber accounting for the changes in flow field due to particle collection
  469. Electrochemical micromachining of small tapered microstructures with sub-micro spherical tool
  470. Primary tracheobronchial amyloidosis in China: Analysis of 64 cases and a review of literature
  471. Methane absorption and application of mixed organic aggregate prepared from Span80 and alkaline salt
  472. A knowledge-based approach to assembly sequence planning
  473. A novel six-state cutting force model for drilling-countersinking machining process of CFRP-Al stacks
  474. Pilot-scale verification of maximum tolerable hydrodynamic stress for mammalian cell culture
  475. ROPAS: Cross-Layer Cognitive Architecture for Mobile UWB Networks
  476. Improvement of Regio-Specific Production of Myricetin-3- O -α- l -Rhamnoside in Engineered Escherichia coli
  477. Composition design and properties of CoNbZr amorphous films deposited by unbalanced magnetron sputtering
  478. Production of xylanase by an alkaline-tolerant marine-derived Streptomyces viridochromogenes strain and improvement by ribosome engineering
  479. Expression, characterization of a novel nitrilase PpL19 from Pseudomonas psychrotolerans with S -selectivity toward mandelonitrile present in active inclusion bodies
  480. Challenges in technology transfer: an actor perspective in a quadruple helix environment
  481. Flavonoids from Heliotropium subulatum exudate and their evaluation for antioxidant, antineoplastic and cytotoxic activities II
  482. Characteristics of VIV in multi-degree-of-freedom tensioned beams using a numerical method
  483. Characterization of microbial communities in a granular activated carbon–sand dual media filter for drinking water treatment
  484. Improved serum stability and biophysical properties of siRNAs following chemical modifications
  485. A new approach to solve multi-response statistical optimization problems using neural network, genetic algorithm, and goal attainment methods
  486. Engineered glucose isomerase from Streptomyces sp. SK is resistant to Ca 2+ inhibition and Co 2+ independent
  487. Managing the constraints of boundary spanning in emergency management
  488. Vorbereitung zur Facharztprüfung HNO
  489. Field dependence–independence as visuospatial and executive functioning in working memory: implications for instructional systems design and research
  490. Alginate Microencapsulation for Oral Immunisation of Finfish: Release Characteristics, Ex Vivo Intestinal Uptake and In Vivo Administration in Atlantic Salmon, Salmo salar L.
  491. Cloning and expression of a tyrosinase from Aspergillus oryzae in Yarrowia lipolytica : application in l -DOPA biotransformation
  492. Comparison of different power generators in PV-battery-power generator hybrid system
  493. Auslagenersatz bei KH-Konsilen — kein Grund zur Kürzung
  494. Synthesis of flavor and fragrance esters using Candida antarctica lipase
  495. Methane production potential and methanogenic archaea community dynamics along the Spartina alterniflora invasion chronosequence in a coastal salt marsh
  496. Magnetic Monitoring of Iron Impurities in Petroleum Products: Determination of Limiting Rate in an Analyzer
  497. Cloning and Characterization of a Pyruvate Carboxylase Gene from Penicillium rubens and Overexpression of the Genein the Yeast Yarrowia lipolytica for Enhanced Citric Acid Production
  498. Thirty-criteria-based agility assessment: a case study in an Indian pump manufacturing organisation
  499. Modelling the mortality of Hylotrupes bajulus (L.) larvae exposed to anoxic treatment for disinfestation of wooden art objects
  500. Microstructure and Properties of Porous Abradable Alumina Coatings Flame-Sprayed with Semi-molten Particles
  501. New concept for micro-manipulation systems: a practical experience
  502. Immunological Biosensor for Detection of Vibrio cholerae O1in Environmental Water Samples
  503. A computational approach to VLSI analog design
  504. Welding residual stress analysis of 347H austenitic stainless steel boiler tubes using experimental and numerical approaches
  505. Purification of Alcohol Dehydrogenase from Saccharomyces cerevisiae Using Magnetic Dye-Ligand Affinity Nanostructures
  506. Xylose isomerase from polycentric fungus Orpinomyces : gene sequencing, cloning, and expression in Saccharomyces cerevisiae for bioconversion of xylose to ethanol
  507. Self-learning navigation algorithm for vision-based mobile robots using machine learning algorithms
  508. Numerical and experimental analysis of quenching process for cam manufacturing
  509. Aerobic biodegradation of methyl tert -butyl ether (MTBE) by pure bacterial cultures isolated from contaminated soil
  510. Influence of the Spray Angle on the Properties of HVOF Sprayed WC–Co Coatings Using (−10 + 2 μm) Fine Powders
  511. Effect of thermal annealing on Nd 2 O 3 -doped silica powder prepared by the solgel process
  512. A smart anticorrosion coating based on hollow silica nanocapsules with inorganic salt in shells
  513. Universal species concept: pipe dream or a step toward unifying biology?
  514. In vitro evaluation of the effect of the nematophagous fungi Duddingtonia flagrans , Monacrosporium sinense and Pochonia chlamydosporia on Schistosoma mansoni eggs
  515. Nitrogen cycling and relationships between ammonia oxidizers and denitrifiers in a clay-loam soil
  516. Quality of rusks prepared by incorporation of concentrated whey
  517. Surface functional properties of blood plasma protein fractions
  518. Anti-oxidant and anti-inflammatory properties of methanol extracts from various crops
  519. A new approach to analysing machined surfaces by ball-end milling, part I:
  520. A strategy to prevent the occurrence of Lactobacillus strains using lactate-tolerant yeast Candida glabrata in bioethanol production
  521. Mechanical vibration and critical speeds of rotating composite laminate disks
  522. A faster, more reliable solver of regular-grid TSPs: single value threshold accepting
  523. Enhanced electromigration reliability via Ag nanoparticles modified eutectic Sn–58Bi solder joint
  524. Precise measurement of angular position and speed of spindle motor during spin-up by computing differences in winding current rise time
  525. Functional properties of water kefiran and its use as a hydrocolloid in baking
  526. Optimization of medium and cultivation conditions for capsular polysaccharide production by Streptococcus pneumoniae serotype 23F
  527. Selective leaching of chromium-containing slag by HCl
  528. A Novel Hatching Enzyme from Starfish Asterias amurensis : Purification, Characterization, and Cleavage Specificity
  529. Motor noise generation and prediction for high spinning speed hard disk drive
  530. Biological control of microbial attachment: a promising alternative for mitigating membrane biofouling
  531. Knowing and Learning with Technology (and on Wheels!): An Introduction to the Special Issue
  532. Value, violence, and the ethics of gaming
  533. An energy-based surface flattening method for flat pattern development of sheet metal components
  534. The essential role of nitrogen limitation in expression of xplA and degradation of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in Gordonia sp. strain KTR9
  535. Lentiviral vector-derived shRNAs confer enhanced suppression of Semliki forest virus replication in BHK-21 cells compared to shRNAs expressed from plasmids
  536. Speciation of bioaccessible (heme, ferrous and ferric) iron from school menus
  537. Effects of ozone on the cytomembrane and ultrastructure of Pseudomonas aeruginosa
  538. Some comments on “Optimization of production scheduling with time-dependent and machine-dependent electricity cost for industrial energy efficiency”
  539. Sequential Data Fusion via Vector Spaces: Fusion of Heterogeneous Data in the Complex Domain
  540. Computational Diversions: Slamming Door Comedy
  541. Total saponins from dioscorea septemloba thunb reduce serum uric acid levels in rats with hyperuricemia through OATP1A1 up-regulation
  542. Poly(hydroxyalkanoate) synthase genotype and PHA production of Pseudomonas corrugata and P. mediterranea
  543. Felsenbeinchirurgie
  544. An integrated study of surface roughness for modelling and optimization of cutting parameters during end milling operation
  545. Purification, Sequencing, and Biochemical Characterization of a Novel Calcium-Independent α-Amylase AmyTVE from Thermoactinomyces vulgaris
  546. Purification, Sequencing, and Biochemical Characterization of a Novel Calcium-Independent α-Amylase AmyTVE from Thermoactinomyces vulgaris
  547. Comparison of bacterial community structures of terrestrial cyanobacterium Nostoc flagelliforme in three different regions of China using PCR-DGGE analysis
  548. Stroke Style Analysis for Painterly Rendering
  549. Optimal design of spaced plates under hypervelocity impact
  550. Study on the effect of heating plate thickness on the micro induction heater for thermal bubbles generation
  551. Oral vaccine of Lactococcus lactis harbouring pandemic H1N1 2009 haemagglutinin1 and nisP anchor fusion protein elevates anti-HA1 sIgA levels in mice
  552. Multiple interactions in riverine biofilms - surfactant adsorption, bacterial attachment and biodegradation
  553. Invading time of Colletotrichum gloeosporioides affects fruit drop and infection rate in ‘Irwin’ mango ( Mangifera indica L.)
  554. Perceived organisational support, job involvement and turnover intention in lean production in Sri Lanka
  555. Comparison of 16S rRNA sequencing with biochemical testing for species-level identification of clinical isolates of Neisseria spp.
  556. Mapping the journey: visualising collaborative experiences for sustainable design education
  557. Mapping the journey: visualising collaborative experiences for sustainable design education
  558. Characterization of human skin-derived mesenchymal stem cell proliferation rate in different growth conditions
  559. Thermal stress developed during the laser cutting process: consideration of different materials
  560. Volatile compound production in Agave duranguensis juice fermentations using four native yeasts and NH 4 Cl supplementation
  561. Effect of adding surfactant for transforming lignocellulose into fermentable sugars during biocatalysing
  562. Academic policy and entrepreneurship: a European perspective
  563. Heterologous Overexpression, Purification and Characterisation of an Alcohol Dehydrogenase (ADH2) from Halobacterium sp. NRC-1
  564. Fabrication and characterization of amorphous ITO/p-Si heterojunction solar cell
  565. High-speed digital filtering: Structures and finite wordlength effects
  566. Two-phase anaerobic co-digestion of used vegetable oils’ wastes and pig manure
  567. Engineering of LadA for enhanced hexadecane oxidation using random- and site-directed mutagenesis
  568. Neue Wege im Prozessrecht bei Behandlungsfehlern gefordert
  569. Directed evolution of poly[( R )-3-hydroxybutyrate] depolymerase using cell surface display system: functional importance of asparagine at position 285
  570. Effects of IL-6 and cortisol fluctuations in post-stroke depression
  571. Electroforming of revolving parts with near-polished surface and uniform thickness
  572. Iterative estimation of coherent-scattering profiles from given positions by use of a single-direction beam
  573. Bioremediation of Textile Azo Dyes by Trichophyton rubrum LSK-27
  574. Microsatellite marker-based diversity and population genetic analysis of selected lowland and mid-altitude maize landrace accessions of India
  575. Multi-performance modeling and optimization control strategies for electro-chemical honing: a critical evaluation
  576. Experimental and computational study on recompression reaction of pilot-injected fuel during negative valve overlap in a gasoline-fueled homogeneous charge compression ignition engine
  577. Aerobic microbial manufacture of nanoscale selenium: exploiting nature’s bio-nanomineralization potential
  578. Development of a metal removal model using spherical ceramic media in a centrifugal disk mass finishing machine
  579. Analytical and experimental investigations on the novel hydro ironing process
  580. Improvement in the Purification Process of the Capsular Polysaccharide from Haemophilus influenzae Type b by Using Tangential Ultrafiltration and Diafiltration
  581. Seam tracking control for mobile welding robot based on vision sensor
  582. The impact of farming on river banks on water quality of the rivers
  583. Identification of fungal metabolites of anticonvulsant drug carbamazepine
  584. Biosynthesis of Poly(3-hydroxybutyrate- co -3-hydroxyvalerate- co -4-hydroxybutyrate) terpolymer by Cupriavidus sp. USMAA2-4 through two-step cultivation process
  585. Studying the effectiveness of conceptual design in secondary design and technology in England
  586. Effect of sulphate groups on catalytic properties of chromium supported by zirconia in the n -hexane aromatization
  587. A Thermostable Alkaline Lipase from a Local Isolate Bacillus subtilis EH 37: Characterization, Partial Purification, and Application in Organic Synthesis
  588. Transformed soybean ( Glycine max ) roots as a tool for the study of the arbuscular mycorrhizal symbiosis
  589. Water content of roasted coffee: impact on grinding behaviour, extraction, and aroma retention
  590. Interessenkonflikte: Wie unabhängig sind Studienautoren und Kommentatoren?
  591. Technology transfer: opportunities and outlook in a challenging economy
  592. Innovation and internationalization: the case of Italy
  593. Sorption of Cd 2+ ions onto zeolite synthesized from perlite waste
  594. Estimation of unknown speaker’s height from speech
  595. Experimental study on ECM with a grid cathode composed of circular cells
  596. From bio-mineralisation to fuel cells: biomanufacture of Pt and Pd nanocrystals for fuel cell electrode catalyst
  597. Original models for the prediction of angular error in wire-EDM taper-cutting
  598. Surface treatment optimization of pigmentary TiO 2 from an industrial aspect
  599. Wertigkeit der BAHA-Testung für das postoperative Hörergebnis
  600. Antidiabetic andantioxidant properties, and α-amylase and α-glucosidase inhibition effects of triterpene saponins from Piper auritum
  601. Recent biotechnological progress in enzymatic synthesis of glycosides
  602. Controlling chitosan’s molecular weight via multistage deacetylation
  603. Book Symposium on Robert P. Crease’s World in the Balance: the Historic Quest for an Absolute System of Measurement
  604. MCM-41 prepared with ionic liquid and cethytrimethylammonium bromide as co-templates
  605. Computer aided inspection: design of customer-oriented benchmark for noncontact 3D scanner evaluation
  606. Detection of ground-glass opacities by use of hybrid iterative reconstruction (iDose) and low-dose 256-section computed tomography: a phantom study
  607. Over-production of a glycoside hydrolase family 50 β-agarase from Agarivorans sp. JA-1 in Bacillus subtilis and the whitening effect of its product
  608. Occurrence of Cellulose-Producing Gluconacetobacter spp. in Fruit Samples and Kombucha Tea, and Production of the Biopolymer
  609. Effect of deep-frying on 3-MCPD esters and glycidyl esters contents and quality control of refined olive pomace oil blended with refined palm oil
  610. Horse gram- an underutilized nutraceutical pulse crop: a review
  611. Immortalization of pig fibroblast cells by transposon-mediated ectopic expression of porcine telomerase reverse transcriptase
  612. Formaldehyde induces the bone marrow toxicity in mice by regulating the expression of Prx3 protein
  613. Dominant Skyline Query Processing over Multiple Time Series
  614. Biological activities of fructooligosaccharide (FOS)-containing Coix lachryma-jobi Linn. extract
  615. Characterization of an exo-acting intracellular α-amylase from the hyperthermophilic bacterium Thermotoga neapolitana
  616. Finishing operation selection of coupling teeth depending on shaft misalignment
  617. Application of grey model for machine degradation prognostics
  618. Enhanced production of poly(3-hydroxybutyrate- co -4-hydroxybutyrate) copolymer with manipulated variables and its properties
  619. The Application of the Biolog EcoPlate Approach in Ecotoxicological Evaluation of Dairy Sewage Sludge
  620. Nonequilibrium Atmospheric Plasma Deposition
  621. A novel fluorescence probe 9-(4-(1,2-diamine)benzene-N 1 -phenyl)acridine for nitric oxide determination
  622. Isotherms for the sorption of zinc and copper onto kaolinite: comparison of various error functions
  623. The prediction of profile deviations when Creep Feed grinding complex geometrical features by use of neural networks and genetic programming with real-time simulation
  624. Beneficial effects of enhanced aeration using perfluorodecalin in Yarrowia lipolytica cultures for lipase production
  625. Saccharomyces cerevisiae and metabolic activators: HXT3 gene expression and fructose/glucose discrepancy in sluggish fermentation conditions
  626. Evaluation of a protective effect of in ovo delivered Campylobacter jejuni OMVs
  627. A simple procedure of lupin seed protein fractionation for selective food applications
  628. Grain size effect of thickness/average grain size on mechanical behaviour, fracture mechanism and constitutive model for phosphor bronze foil
  629. Efficiency improvement for an unthrottled SI engine at part load
  630. Tocotrienol levels in sieving fraction extracts of brewer’s spent grain
  631. Synthesis of LiCoO 2 by l -apple acid assisted sol–gel method and its electrochemical behavior in aqueous lithium-ion battery
  632. Study of the Antibacterial Behavior of Wire Arc Sprayed Copper Coatings
  633. Methodology for corrosion evaluation in HAZ of 11%-Cr ferritic stainless steel
  634. Bacterial-killing effect of atmospheric pressure non-equilibrium plasma jet and oral mucosa response
  635. Understanding The Impact of an Apprenticeship-Based Scientific Research Program on High School Students’ Understanding of Scientific Inquiry
  636. Construction of a reference plasmid molecule containing eight targets for the detection of genetically modified crops
  637. GenUTest: a unit test and mock aspect generation tool
  638. Durum wheat cultivar traceability in PDO Altamura bread by analysis of DNA microsatellites
  639. Analysis of electromagnetic interference of a capacitive RF MEMS switch during switching
  640. Biogas desulfurization using autotrophic denitrification process
  641. Isotopic labeling of the heme cofactor in cytochrome p450 and other heme proteins
  642. A new rapid manufacturing process for multi-face high-speed machining
  643. Application of a novel biopolymer to enhance oil recovery
  644. Design and evaluation of sideslip angle observer for vehicle stability control
  645. Novel roles of Bacillus thuringiensis to control plant diseases
  646. pEGFP-T, a novel T-vector for the direct, unidirectional cloning and analysis of PCR-amplified promoters
  647. Antifungal efficacy of plant essential oils against stored grain fungi of Fusarium spp.
  648. The use of speed-up techniques for a speech recognizer system
  649. Ultra fine pitch flat panel display packaging using 3 μm conductive particles
  650. Expression of the endogenous and heterologous clavulanic acid cluster in Streptomyces flavogriseus : why a silent cluster is sleeping
  651. Characteristic fragment ions from lignin and polysaccharides in ToF–SIMS
  652. Multi-items ordering model considering transportation constraint on the inventory management
  653. Rapid and Continuous Deposition of Porous Nanocrystalline SnO 2 Coating with Interpenetrating Pores for Gas Sensor Applications
  654. Condition Assessment of the “Dam – Bed” System at the Sayano-Shushenskaya HPP on Completion of the 2012 Reservoir Filling
  655. Enhanced Lipid Production by Co-cultivation and Co-encapsulation of Oleaginous Yeast Trichosporonoides spathulata with Microalgae in Alginate Gel Beads
  656. Distribution of mycotoxins and risk assessment of maize consumers in five agro-ecological zones of Nigeria
  657. Bianchi Type-III String Cosmological Model with Bulk Viscous Fluid in Lyra Geometry
  658. Stress tolerance and physicochemical properties of encapsulation processes for Lactobacillus rhamnosus in pomegranate ( Punica granatum L.) fruit juice
  659. Coupling Between an Accumulator and a Loop in a Mechanically Pumped Carbon Dioxide Two-Phase Loop
  660. Impact of sodium nitroprusside on nitrate reductase, proline content, and antioxidant system in tomato under salinity stress
  661. The Use of Electric Force as a Replacement of Buoyancy in Two-phase Flow
  662. Comparison of three types of methods for the isolation of DNA from flours, biscuits and instant paps
  663. Thermodynamic second law analysis for a gravity-driven variable viscosity liquid film along an inclined heated plate with convective cooling
  664. Detection of β-casein variants in yak ( Bos grunniens ) by PCR-SSCP
  665. Water quality index of the ground water of bitumen deposit impacted farm settlements using entropy weighted method
  666. Specific monitoring of cardiomyogenic and endothelial differentiation by dual promoter-driven reporter systems in bone marrow mesenchymal stem cells
  667. Phytase activity in brown rice during steeping and sprouting
  668. Two-Stage Intermittent Microwave Coupled with Hot-Air Drying of Carrot Slices: Drying Kinetics and Physical Quality
  669. Imprinting and the progeny of university spin-offs
  670. Enhancing the biodiesel manufacturing process by use of glycerin to produce hyacinth fragrance
  671. Determination of the flow stress and thermal properties of ceramic powder feedstock in ceramic injection molding
  672. Solvability identification and feasibility restoring of divergent optimal power flow problems
  673. Pulsed electrohydrodynamic printing of conductive silver patterns on demand
  674. Surface durability of powder-forged roller treated by shot peening
  675. Metabolic engineering of gossypol in cotton
  676. Lactulose production by β-galactosidase in permeabilized cells of Kluyveromyces lactis
  677. Effects of gas and particle emissions on wall radiative heat flux in oxy-fuel combustion
  678. A Pilot Study on Hypoxic Air Performance in Fire Prevention
  679. Assimilable nitrogen utilisation and production of volatile and non-volatile compounds in chemically defined medium by Saccharomyces cerevisiae wine yeasts
  680. Molecular Cloning of Hemocyanin cDNA from Fenneropenaeus chinensis and Antimicrobial Analysis of Two C-terminal Fragments
  681. Construction of an S-layer protein exhibiting modified self-assembling properties and enhanced metal binding capacities
  682. Effect of Spray Particle Velocity on Cavitation Erosion Resistance Characteristics of HVOF and HVAF Processed 86WC-10Co4Cr Hydro Turbine Coatings
  683. Removal of uranium(VI) from aqueous solutions using Eucalyptus citriodora distillation sludge
  684. A three-dimensional wood material model to simulate the behavior of wood with any type of knot at the macro-scale
  685. Structural characteristics and properties of polyurethane modified TDE-85/MeTHPA epoxy resin with interpenetrating polymer networks
  686. Acoustic emission analysis of industrial plywood materials exposed to destructive tensile load
  687. Mizuko Ito, Daisuke Okabe and Misa Matsuda (eds.), Personal, Portable, Pedestrian: Mobile Phones in Japanese Life
  688. Quantitative descriptive analysis and principal component analysis for sensory characterization of Indian milk product cham-cham
  689. Evaluation of synthetic dye decolorization capacity in Ischnoderma resinosum
  690. Concurrent cell formation and layout design using scatter search
  691. Effects of removal of surface proteins on physicochemical and structural properties of A- and B-starch isolated from normal and waxy wheat
  692. A modified variable sample size and sampling interval controlchart
  693. Conserved and specific responses to hypoxia in Aspergillus oryzae and Aspergillus nidulans determined by comparative transcriptomics
  694. Isolation and characterization of soil Streptomyces species as potential biological control agents against fungal plant pathogens
  695. Vestibuläres Rehabilitationstraining: Physiotherapie stoppt den Schwindel
  696. Lipase-catalyzed simultaneous biosynthesis of biodiesel and glycerol carbonate from corn oil in dimethyl carbonate
  697. Das intramuskuläre Lipom
  698. Foam aptitude of Bobal variety in white sparkling wine elaboration and study of volatile compounds
  699. Towards β-globin gene-targeting with integrase-defective lentiviral vectors
  700. Investigation on dynamic responses of dual-axis positioning mechanism for satellite antenna considering joint clearance
  701. Enhanced bacterial expression of several mammalian cytochrome P450s by codon optimization and chaperone coexpression
  702. Optimal Feature Extraction Using Greedy Approach for Random Image Components and Subspace Approach in Face Recognition
  703. Coupling of enantioselective biooxidation of dl -1,2-propanediol and bioreduction of pinacolone via regeneration cycle of coenzyme
  704. A decision support system for the selection of a rapid prototyping process using the modified TOPSIS method
  705. Study of microstructural influences on machinability of case hardening steel
  706. Stabilization of Chromobacterium viscosum Lipase (CVL) Against Ultrasound Inactivation by the Pretreatment with Polyethylene Glycol (PEG)
  707. Impact of the educational use of Facebook group on the high school students’ proper usage of language
  708. Elimination of diaminopeptidase activity in Pichia pastoris for therapeutic protein production
  709. Characterization of Bacillus spp. strains for use as probiotic additives in pig feed
  710. Influence of keeping system on the fatty acid composition in the longissimus muscle of bulls and odorants formed after pressure-cooking
  711. The simulation and analysis of pedestrian crowd and behavior
  712. Screening, breeding and metabolic modulating of a strain producing succinic acid with corn straw hydrolyte
  713. The policy impact on clean technology diffusion
  714. Use of Swine Wastewater as Alternative Substrate for Mycelial Bioconversion of White Rot Fungi
  715. Approaches to stabilization of inter-domain recombination in polyketide synthase gene expression plasmids
  716. Willingness to pay for improved residential waste management in a developing country
  717. Ultraviolet-B radiation improves astaxanthin accumulation in green microalga Haematococcus pluvialis
  718. Lift Force Acting on Body in Liquid in the Vicinity of Boundary Executing Tangential Oscillations
  719. Impact of the educational use of Facebook group on the high school students’ proper usage of language
  720. Treatment of primary-settled urban sewage in pilot-scale vertical flow wetland filters: comparison of four emergent macrophyte species over a 12 month period
  721. Study on 3D topography of machined surface in high-speed hard cutting with PCBN tool
  722. Analisi di minimizzazione dei costi della terapia con immunoglobuline (Ig) per il trattamento di pazienti con immunodeficienza primaria: confronto tra terapia con Ig sottocute vs endovena
  723. A parametric study of the confined spraying distance, solution concentration, and spraying time for the spraying technique used to fabricate PS superhydrophobic surfaces
  724. DNA restriction-modification systems in the ethanologen, Zymomonas mobilis ZM4
  725. Phase Composition and Microstructural Responses of Graded Mullite/YSZ Coatings Under Water Vapor Environments
  726. Effect of Hormones on Tumor Formation in Tobacco Hybrids
  727. Defining, designing for, and measuring “social constructivist digital literacy” development in learners: a proposed framework
  728. Wastewater treatment by stabilization pond: Marrakesh experiment
  729. Optical and magnetic properties of Fe 2 O 3 /SiO 2 nano-composite films
  730. Comparison of the secondary metabolites in two scales of cephalosporin C (CPC) fermentation and two different post-treatment processes
  731. Design and use of an eddy current retarder in an automobile
  732. Structural characterization and temperature-dependent production of C 17 -fengycin B derived from Bacillus amyloliquefaciens subsp. plantarum BC32-1
  733. Evaluation of sub-microstructure in concrete with low water-binder ratio by SEM-BSE image analysis
  734. Selection of wastewater treatment process based on the analytical hierarchy process and fuzzy analytical hierarchy process methods
  735. JTST Editorial Team Expands; Vardelle Named Lead Editor
  736. Interaction Between Some Phenolic Compounds and Probiotic Bacterium in Functional Ice Cream Production
  737. Infrared Heating as a Disinfestation Method Against Sitophilus oryzae and Its Effect on Textural and Cooking Properties of Milled Rice
  738. Combining Two-Stage Testing and Interval Mapping Strategies to Detect QTL for Resistance to Bonamiosis in the European Flat Oyster Ostrea edulis
  739. Understanding modelling in technology and science: the potential of stories from the field
  740. Image-quality assessment method for digital phase-contrast imaging based on two-dimensional power spectral analysis
  741. Induction and carbon catabolite repression of phenol degradation genes in Rhodococcus erythropolis and Rhodococcus jostii
  742. Inhibition of anthrax lethal factor: lability of hydroxamate as a chelating group
  743. Modeling and optimal energy management of a power split hybrid electric vehicle
  744. Fabrication of polystyrene microfluidic devices using a pulsed CO 2 laser system
  745. Effects of wastewater stabilization pond effluent on agricultural crops
  746. Common rail injection system iterative learning control based parameter calibration for accurate fuel injection quantity control
  747. The transcriptomic profile of Pseudozyma aphidis during production of mannosylerythritol lipids
  748. The reality of STEM education, design and technology teachers’ perceptions: a phenomenographic study
  749. Collagen Hydrolysates of Skin Shavings Prepared by Enzymatic Hydrolysis as a Natural Flocculant and Their Flocculating Property
  750. Determinant factors of university spin-off: the case of Korea
  751. Methanogenic activity and performance of UASB, DSFF and USFF reactors
  752. Estimation of Dielectric Properties of Cakes Based on Porosity, Moisture Content, and Formulations Using Statistical Methods and Artificial Neural Networks
  753. Antimicrobial activity of the imipenem/rifampicin combination against clinical isolates of Acinetobacter baumannii grown in planktonic and biofilm cultures
  754. Decolorization of diazo dye Direct Red 81 by a novel bacterial consortium
  755. Sorption of copper and lead by citric acid modified wood
  756. Enhanced efficiency of sorting sperm motility utilizing a microfluidic chip
  757. Effect of type and percentage of reinforcement for optimization of the cutting force in turning of Aluminium matrix nanocomposites using response surface methodologies
  758. Situated learning and teachers’ digital competence
  759. Sprachverständnis bei Late Talkers
  760. Investigation of Br–N Co-doped TiO 2 photocatalysts: preparation and photocatalytic activities under visible light
  761. Carbon spheres prepared via solvent-thermal reaction method and their microstructures after high temperature treatment
  762. Modeling and experimental analysis of fiber laser offset welding of Al-Ti butt joints
  763. Drying Sage ( Salvia officinalis L.) Plants and Its Effects on Content, Chemical Composition, and Radical Scavenging Activity of the Essential Oil
  764. Influence of dielectric and machining parameters on the process performance for electric discharge milling of SiC ceramic
  765. Aerobic and anaerobic ammonium-oxidising bacterial enrichment from municipal solid waste
  766. Production of poly(3-hydroxybutyrate- co -3-hydroxyvalerate) P(3HB- co -3HV) with a broad range of 3HV content at high yields by Burkholderia sacchari IPT 189
  767. Bifurcation and chaos analysis of atomic force microscope system
  768. Comparison of dosiology between three dimensional conformal and intensity-modulated radiotherapies (5 and 7 fields) in gastric cancer post-surgery
  769. Finite element simulation and experiments on a new induction heating bearing replacer
  770. Advanced RFID application for a mixed-product assembly line
  771. Toxic effect of Pb, Cd, Ni and Zn on Azolla filiculoides in the International Anzali Wetland
  772. Fatty acid composition of Portuguese spreadable fats with emphasis on trans isomers
  773. Clostridium beijerinckii mutant with high inhibitor tolerance obtained by low-energy ion implantation
  774. A verification tool for ERLANG
  775. Lithium chloride promotes neuronal differentiation of rat neural stem cells and enhances neural regeneration in Parkinson’s disease model
  776. Challenges for the development of advanced constructed wetlands technology
  777. Saponin-rich fraction from Clematis chinensis Osbeck roots protects rabbit chondrocytes against nitric oxide-induced apoptosis via preventing mitochondria impairment and caspase-3 activation
  778. Research on the natural meshing mechanism and testing analysis of scroll profiles for refrigeration scroll compressor
  779. Microbial inhibition in mozzarella cheese using rosemary and thyme oils in combination with sodium diacetate
  780. Multi-pass laser welding of thick plate with filler wire by using a narrow gap joint configuration
  781. A new adaptive interpolation scheme of NURBS based on axis dynamics
  782. Experimental analyses to investigate the feasibility and effectiveness in using heat pipe-embedded drills
  783. Tapping the educational potential of Facebook: Guidelines for use in higher education
  784. Enhanced Extracellular Production of Heterologous Proteins in Bacillus subtilis by Deleting the C-terminal Region of the SecA Secretory Machinery
  785. Tolypothrix tenuis stress response to nickel
  786. Productivity Prediction Model for Complex Wells with Damage to the Producing Formation
  787. NahK/GlmU fusion enzyme: characterization and one-step enzymatic synthesis of UDP- N -acetylglucosamine
  788. Classification of Turkish olive oils with respect to cultivar, geographic origin and harvest year, using fatty acid profile and mid-IR spectroscopy
  789. Purification and Characterization of Pepsin-Solubilized Collagen from Skin of Sea Cucumber Holothuria parva
  790. Asymmetrical rolling analysis of bonded two-layer sheets and evaluation of outgoing curvature
  791. Sliding wear performance of reinforced A413 alloy at elevated temperatures
  792. Small interfering RNA targeting TNF-α gene significantly attenuates renal ischemia-reperfusion injury in mice
  793. Broadening Horizons and Teaching Basic Biology Through Cell-Free Synthesis of Green Fluorescent Protein in a High School Laboratory Course
  794. Analysis and testing of a contraction-and-expansion micromixer for micromilled microfluidics
  795. Di(2-ethylhexyl) adipate migration from PVC-cling film into packaged sea bream ( Sparus aurata ) and rainbow trout ( Oncorhynchus mykiss ) fillets: kinetic study and control of compliance with EU specifications
  796. Effect of red mold rice supplements on serum and meat cholesterol levels of broilers chicken
  797. Enhanced chemical and biological activities of a newly biosynthesized eugenol glycoconjugate, eugenol α - d -glucopyranoside
  798. A One-Dimensional Flow Model with Adiabatic Friction for Rapid Estimation of Cold Spray Flow Conditions
  799. The hydro-abrasive erosion wear behavior of duplex-treated surfaces of AISI H13 tool steel
  800. Optimization of process variables and corrosion properties of a multi layer silica sol gel coating on AZ91D using the Box–Behnken design
  801. Intensity-modulated radiotherapy for sinonasal teratocarcinosarcoma
  802. Stretch bending defects control of L-section aluminum components with variable curvatures
  803. Experimental analysis of properties of materials for rapid prototyping
  804. Rapid prediction of longitudinal curvature obtained by flexibly reconfigurable roll forming using response surface methodology
  805. Springback behavior of AA6061 with non-uniform thickness section using Taguchi Method
  806. Jet flow characteristics of sinusoidal wavy nozzles
  807. Isolation and characterization of protein fractions from deoiled rice bran
  808. Enhanced production of CoQ 10 by newly isolated Sphingomonas sp. ZUTEO3 with a coupled fermentation–extraction process
  809. Fast Modeling of Phase Changes in a Particle Injected Within a d.c Plasma Jet
  810. Inhibition of β-amyloid peptide-induced neurotoxicity by kaempferol 3- O -(6″-acetyl)-β-glucopyranoside from butterbur ( Petasites japonicus ) leaves in B103 cells
  811. Extract of Poncirus trifoliata fruit reduces elevated serum IgE concentrations in chemically induced allergic model mice
  812. Production of edible mushrooms in forests: trends in development of a mycosilviculture
  813. Electromagnetic shielding wood-based composite from electroless plating corrosion-resistant Ni–Cu–P coatings on Fraxinus mandshurica veneer
  814. Biocontrol of moth pests in apple orchards: Preliminary field study of application potential for mass trapping
  815. A particle swarm optimization algorithm with neighborhood-based mutation for sequence-dependent disassembly line balancing problem
  816. A stochastic optimization approach for paper recycling reverse logistics network design under uncertainty
  817. Enhanced production of CoQ 10 by newly isolated Sphingomonas sp. ZUTEO3 with a coupled fermentation–extraction process
  818. Microwave sintering of W-15Cu ultrafine composite powder prepared by spray drying & calcining-continuous reduction technology
  819. Biosorption of heavy metals by organic carbon from spent mushroom substrates and their raw materials
  820. An Extracellular S1-Type Nuclease of Marine Fungus Penicillium melinii
  821. A new salicylate synthase AmS is identified for siderophores biosynthesis in Amycolatopsis methanolica 239 T
  822. A one-pot system for production of l -2-aminobutyric acid from l -threonine by l -threonine deaminase and a NADH-regeneration system based on l -leucine dehydrogenase and formate dehydrogenase
  823. Fractionation of Sugarcane Bagasse Using a Combined Process of Dilute Acid and Ionic Liquid Treatments
  824. Effects of the mushroom-volatile 1-octen-3-ol on dry bubble disease
  825. Bulk Properties of Food Particulate Materials: An Appraisal of their Characterisation and Relevance in Processing
  826. Assessment of antibacterial activity of silver nanoparticles on Pseudomonas aeruginosa and its mechanism of action
  827. Evaluating the effects of process parameters on maximum extrusion pressure using a new artificial neural network-based (ANN-based) partial-modeling technique
  828. Error calculation for corrective machining with allowance requirements
  829. Wo stehen wir bei der CI-Versorgung?
  830. Al 2 O 3 /TiO 2 core/shell powder derived by novel sol–gel routes
  831. Shield-layers for reducing thermoelastic damping in resonating Silicon bars
  832. Enhanced Production of Human Recombinant Proteins from CHO cells Grown to High Densities in Macroporous Microcarriers
  833. Indigoids Biosynthesis from Indole by Two Phenol-Degrading Strains, Pseudomonas sp. PI1 and Acinetobacter sp. PI2
  834. Bacterioplankton community analysis in tilapia ponds by Illumina high-throughput sequencing
  835. Seismicity Within and Beyond the Empire: Japanese Seismological Investigation in Taiwan and its Global Deployment, 1895–1909
  836. Magnetic and microwave absorption properties of Ni 1− x Zn x Fe 2 O 4 nanocrystalline synthesized by sol-gel method
  837. Ethical motivations for green business and engineering
  838. Scientific Inquiry Self-Efficacy and Computer Game Self-Efficacy as Predictors and Outcomes of Middle School Boys’ and Girls’ Performance in a Science Assessment in a Virtual Environment
  839. Effect of Olive Leaves Addition during the Extraction Process of Overmature Fruits on Olive Oil Quality
  840. Effect of freezing prior to ripening on the peptide profile present in the water-soluble fraction at pH 4.6 of a commercial low-fat soft cheese
  841. Two-step electromagnetic forming process using spiral forming coils to deform sheet metal in a middle-block die
  842. Dehalococcoides abundance and alternate electron acceptor effects on large, flow-through trichloroethene dechlorinating columns
  843. Volatile components and sensory characteristics of Thai traditional fermented shrimp pastes during fermentation periods
  844. Steine statt Scheine
  845. FluRox based biosensors
  846. Physiological characterization of starch-utilizing Saccharomyces sp. SK0704 isolated from kimchi
  847. Augmented Ontologies or How to Philosophize with a Digital Hammer
  848. Vibration characteristics of computer stacked disks and head assembly
  849. Revisiting the free transverse vibration of embedded single-layer graphene sheets acted upon by an in-plane magnetic field
  850. Comparative analysis of phytochemical profile, antioxidant activities and foam prevention abilities of whole fruit, pulp and seeds of Emblica officinalis
  851. Effect of current polarity on electrical sliding wear behavior of Cu-WS 2 -graphite-WS 2 nanotube composites in air and vacuum conditions
  852. Practical experiences of applying source-level WCET flow analysis to industrial code
  853. Korean red ginseng combined with nattokinase ameliorates dyslipidemia and the area of aortic plaques in high cholesterol-diet fed rabbits
  854. Aeroelastic trim and flight loads analysis of flexible aircraft with large deformations
  855. Production of recombinant bacteriocin divercin V41 by high cell density Escherichia coli batch and fed-batch cultures
  856. Configuration design of ten-speed automatic transmissions with twelve-link three-DOF Lepelletier gear mechanism
  857. Role of transforming growth factor-β1 in the process of fibrosis of denervated skeletal muscle
  858. Free Radical Scavenging Activity of Aqueous and Ethanolic Extract of Brassica oleracea L. var. italica
  859. Symbolic execution with abstraction
  860. R&D productivity and the organization of cluster policy: an empirical evaluation of the Industrial Cluster Project in Japan
  861. A new surface modification method to improve the dispersity of nano-silica in organic solvents
  862. The expression of mammalian target of rapamycin in Ishikawa and HEC-1A cells
  863. Kinetics of synthesis of YAG nanocrystals by ultrasound and ultrasound-microwave-assisted methods
  864. Carbon fluxes of xylose-consuming Saccharomyces cerevisiae strains are affected differently by NADH and NADPH usage in HMF reduction
  865. An experimental and numerical study on the charring rate of timber beams exposed to three-side fire
  866. Relationship between tissue plasminogen activator production and specific growth rate in Chinese Hamster Ovary cells cultured in mannose at low temperature
  867. Multidimensional line dispensing of unfilled adhesives
  868. A decision support system for rapid one-of-a-kind product development
  869. Comparative study of soybean oil refining using rice hull silicate and commercial adsorbents
  870. The suitable harvesting season and the part of moso bamboo ( Phyllostachys pubescens ) for producing binderless boards
  871. The tool design and experiments on pulse electrochemical machining of micro channel arrays on metallic bipolar plate using multifunctional cathode
  872. Evidence for the existence of PAH-quinone reductase and catechol- O -methyltransferase in Mycobacterium vanbaalenii PYR-1
  873. Teaching with student response systems in elementary and secondary education settings: A survey study
  874. Synthesis of BiFeO 3 nanoparticles with small size
  875. Effect of micro-scale Young’s modulus and surface roughness on adhesion property to plasma-treated rubber surface
  876. Separation of ionic liquid [Mmim][DMP] and glucose from enzymatic hydrolysis mixture of cellulose using alumina column chromatography
  877. MASMICRO micro-/nano-materials processing, analysis, inspection and materials knowledge management
  878. Ivan Málek and the Institute of Microbiology
  879. Parameters evaluation of SOLA algorithm for time scale modification
  880. Th17/Treg imbalance in malignant pleural effusion
  881. Systems usability framework for evaluating tools in safety–critical work
  882. Tandem repeat mhBD2 gene enhance the soluble fusion expression of hBD2 in Escherichia coli
  883. Microbiological, physical–chemical and sensory evaluation of a traditional Brazilian cheese during the ripening process
  884. High-Pressure Cold-Sprayed Ni and Ni-Cu Coatings: Improved Structures and Corrosion Properties
  885. A study on monitoring of frying performance and oxidative stability of virgin coconut oil (VCO) during continuous/prolonged deep fat frying process using chemical and FTIR spectroscopy
  886. Spatiotemporal dynamics in a network composed of neurons with different excitabilities and excitatory coupling
  887. Generation of Rm21LG transgenic mice: a powerful tool to generate conditional overexpression of miR-21 that is involved in oncogenesis
  888. Study of cutting force in ultra-precision raster milling of V-groove
  889. Bacterial consortium expressing surface displayed, intra- and extracellular lipases and pseudopyronine B for the degradation of oil
  890. GPU-accelerated phase field simulation of directional solidification
  891. In-situ growth and photoluminescence of β-Ga 2 O 3 cone-like nanowires on the surface of Ga substrates
  892. Production of biomass and recombinant human-like collagen in Escherichia coli processes with different CO 2 pulses
  893. Enhanced production of antibody fragment via SRP pathway engineering in Escherichia coli
  894. Correcting NIR spectra of dimethyl fumarate in milk measured for different brands and in different dates
  895. New algorithm for variable-rate linear broadcast network coding
  896. Modeling, simulation, and optimization of five-axis milling processes
  897. A new cytochrome P450 system from Bacillus megaterium DSM319 for the hydroxylation of 11-keto-β-boswellic acid (KBA)
  898. A finite element beam analysis by interface matching
  899. Delayed detached-eddy simulation of vortex breakdown over a 70° delta wing
Search Result: